Reference record for OID 1.3.6.1.4.1.4491.2.1.30.1.1.24.1.1

docsRphyRpdDevCoreRedundancyCapSupportsRedundancy

Status in source: current.

Names: docsRphyRpdDevCoreRedundancyCapSupportsRedundancy

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "docsRphyRpdDevCoreRedundancyCapSupportsRedundancy",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "handoverSupport",
    "(",
    "0",
    ")",
    ",",
    "connectionStatusSupport",
    "(",
    "1",
    ")",
    ",",
    "ccapCoreReconnectSupport",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This attribute is a bit mask indicating whether the RPD supports HandoverToBackup, ConnectionStatus, and/or ReconnectFromCore features as indicated below: xxxxxxx0: RPD does not support handover to backup CCAP Core following failure. xxxxxxx1: RPD supports handover to backup CCAP Core. xxxxxx0x: RPD does not support ConnectionStatus to control reconnect to CCAP Core following a failure. xxxxxx1x: RPD supports ConnectionStatus to control reconnect to CCAP Core. xxxxx0xx: RPD does not support CCAP Core initiated reconnect following GCP failure. xxxxx1xx: RPD supports CCAP Core initiated reconnect following GCP failure. \"",
    "::=",
    "{",
    "docsRphyRpdDevCoreRedundancyCapEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "handoverSupport",
          0
        ],
        [
          "connectionStatusSupport",
          1
        ],
        [
          "ccapCoreReconnectSupport",
          2
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This attribute is a bit mask indicating whether the RPD supports HandoverToBackup, ConnectionStatus, and/or ReconnectFromCore features as indicated below: xxxxxxx0: RPD does not support handover to backup CCAP Core following failure. xxxxxxx1: RPD supports handover to backup CCAP Core. xxxxxx0x: RPD does not support ConnectionStatus to control reconnect to CCAP Core following a failure. xxxxxx1x: RPD supports ConnectionStatus to control reconnect to CCAP Core. xxxxx0xx: RPD does not support CCAP Core initiated reconnect following GCP failure. xxxxx1xx: RPD supports CCAP Core initiated reconnect following GCP failure."
    ],
    null,
    null,
    null,
    null
  ]
}

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2018-07-26.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
          SYNTAX BITS {
              handoverSupport(0), 
              connectionStatusSupport(1), 
              ccapCoreReconnectSupport(2) 
              }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION 
              "This attribute is a bit mask indicating whether the RPD 
               supports HandoverToBackup, ConnectionStatus,      
               and/or ReconnectFromCore features as indicated below:
               xxxxxxx0: RPD does not support handover to backup CCAP Core following failure.
               xxxxxxx1: RPD supports handover to backup CCAP Core.
               xxxxxx0x: RPD does not support ConnectionStatus to control reconnect to CCAP Core following a failure.
               xxxxxx1x: RPD supports ConnectionStatus to control reconnect to CCAP Core.
               xxxxx0xx: RPD does not support CCAP Core initiated reconnect following GCP failure.
               xxxxx1xx: RPD supports CCAP Core initiated reconnect following GCP failure. "
          ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2018-07-26.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:54.177098+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2018-10-18.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
          SYNTAX BITS {
              handoverSupport(0), 
              connectionStatusSupport(1), 
              ccapCoreReconnectSupport(2) 
              }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION 
              "This attribute is a bit mask indicating whether the RPD 
               supports HandoverToBackup, ConnectionStatus,      
               and/or ReconnectFromCore features as indicated below:
               xxxxxxx0: RPD does not support handover to backup CCAP
                         Core following failure.
               xxxxxxx1: RPD supports handover to backup CCAP Core.
               xxxxxx0x: RPD does not support ConnectionStatus to 
                         control reconnect to CCAP Core following a failure.
               xxxxxx1x: RPD supports ConnectionStatus to control 
                         reconnect to CCAP Core.
               xxxxx0xx: RPD does not support CCAP Core initiated 
                         reconnect following GCP failure.
               xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                         following GCP failure. "
          ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2018-10-18.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:54.895530+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-01-24.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
          SYNTAX BITS {
              handoverSupport(0), 
              connectionStatusSupport(1), 
              ccapCoreReconnectSupport(2) 
              }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION 
              "This attribute is a bit mask indicating whether the RPD 
               supports HandoverToBackup, ConnectionStatus,      
               and/or ReconnectFromCore features as indicated below:
               xxxxxxx0: RPD does not support handover to backup CCAP
                         Core following failure.
               xxxxxxx1: RPD supports handover to backup CCAP Core.
               xxxxxx0x: RPD does not support ConnectionStatus to 
                         control reconnect to CCAP Core following a failure.
               xxxxxx1x: RPD supports ConnectionStatus to control 
                         reconnect to CCAP Core.
               xxxxx0xx: RPD does not support CCAP Core initiated 
                         reconnect following GCP failure.
               xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                         following GCP failure. "
          ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-01-24.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.074775+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-06-13.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-06-13.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.180890+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-09-26.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-09-26.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.289076+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-01-09.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-01-09.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.938082+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-05-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-05-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.205690+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-10-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-10-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.354948+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-03-11.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-03-11.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.429401+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-10-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-10-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.003028+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-01-20.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-01-20.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.394938+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-03-31.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-03-31.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.424309+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-06-30.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-06-30.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.542970+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-12-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-12-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.089920+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2023-10-12.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['InterfaceIndex', 'TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  · Download DOCS-RPHY-MIB-2023-10-12.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.579257+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2024-01-18.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2024-01-18.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.575041+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2025-01-23.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2025-01-23.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.705674+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB.mib

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdDevCoreRedundancyCapSupportsRedundancy  OBJECT-TYPE
       SYNTAX      BITS {
                        handoverSupport(0), 
                        connectionStatusSupport(1), 
                        ccapCoreReconnectSupport(2) 
                       }
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION 
          "This attribute is a bit mask indicating whether the RPD 
           supports HandoverToBackup, ConnectionStatus,      
           and/or ReconnectFromCore features as indicated below:
           xxxxxxx0: RPD does not support handover to backup CCAP
                     Core following failure.
           xxxxxxx1: RPD supports handover to backup CCAP Core.
           xxxxxx0x: RPD does not support ConnectionStatus to 
                     control reconnect to CCAP Core following a failure.
           xxxxxx1x: RPD supports ConnectionStatus to control 
                     reconnect to CCAP Core.
           xxxxx0xx: RPD does not support CCAP Core initiated 
                     reconnect following GCP failure.
           xxxxx1xx: RPD supports CCAP Core initiated reconnect 
                     following GCP failure. "
       ::= { docsRphyRpdDevCoreRedundancyCapEntry 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB.mib
  Source location: DOCS-RPHY-MIB::docsRphyRpdDevCoreRedundancyCapSupportsRedundancy.
  Source version and references

  Downloaded: 2026-10-26T22:47:25.372984+00:00.