docsRphyRpdDevCoresConnectedInitConfigComplete — CableLabs official current and historical MIBs
This attribute reports whether the Core has indicated that its initial configuration of the RPD is complete.
{1 3 6 1 4 1 4491 2 1 30 1 1 4 1 8}
This attribute reports whether the Core has indicated that its initial configuration of the RPD is complete.
This attribute identifies in which Principal Core operation mode the Core is currently functioning. active: The CCAP Core is actively providing service(s) to the RPD as a Principal or Auxiliary Core. backup: The CCAP Core is configured to provide backup service for an Active Core. notActing: The CCAP Core is not prepared to act as an Active or Backup CCAP Core. decisionPending: The CCAP Core requires further information to make a decision on acting for the RPD or redirecting the RPD. outOfService: An error occurred during the initialization process with the CCAP Core or the RPD has been instructed to place the CCAP Core in Out-Of-Service mode. contactPending: The initial state after configuring the CCAP Core. The CCAP Core has not yet been contacted by the RPD. deprecated: Reserved. redirect: A CCAP Core wishing to redirect an RPD does this by sending an IRA message with the core mode set to 'redirect'. It is the mode for the CCAP Core after it has instructed the RPD to redirect to an alternate Core.
This attribute indicates the role in which the CCAP core is currently acting for the RPD. It also identifies two intermediate states ('decisionPending' and 'contactPending') in which the role of the CCAP Core is still to be determined. active: The CCAP Core is actively providing service(s) to the RPD as a Principal or Auxiliary Core. backup: The CCAP Core is configured to provide backup service for an Active CCAP Core. notActing: The CCAP Core is not prepared to act as an Active or Backup CCAP Core. decisionPending: The CCAP Core requires further information to make a decision on acting for the RPD or redirecting the RPD. outOfService: An error occurred during the initialization process with the CCAP Core or the RPD has been instructed to place the CCAP Core in Out-Of-Service mode. contactPending: The initial state after configuring the CCAP Core. The CCAP Core has not yet been contacted by the RPD. deprecated: Reserved. redirect: A CCAP Core wishing to redirect an RPD does this by sending an IRA message with the CoreMode set to 'redirect'. This is the mode for the CCAP Core after it has instructed the RPD to redirect to an alternate CCAP Core.
Status in source: current.
Names: docsRphyRpdDevCoresConnectedInitConfigComplete
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsRphyRpdDevCoresConnectedInitConfigComplete",
"OBJECT-TYPE",
"SYNTAX",
"TruthValue",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute reports whether the Core has indicated that its initial configuration of the RPD is complete.\"",
"::=",
"{",
"docsRphyRpdDevCoresConnectedEntry",
"8",
"}"
],
"syntax_tree": [
[
"row",
"TruthValue"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute reports whether the Core has indicated that its initial configuration of the RPD is complete."
],
null,
null,
null,
null
]
}Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedInitConfigComplete OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports whether the Core has indicated
that its initial configuration of the RPD is complete."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:53.785025+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedInitConfigComplete OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports whether the Core has indicated
that its initial configuration of the RPD is complete."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:53.813434+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedInitConfigComplete OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute reports whether the Core has indicated
that its initial configuration of the RPD is complete."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:54.177098+00:00.
Status in source: current.
Names: docsRphyRpdDevCoresConnectedCoreMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsRphyRpdDevCoresConnectedCoreMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"1",
")",
",",
"backup",
"(",
"2",
")",
",",
"notActing",
"(",
"3",
")",
",",
"decisionPending",
"(",
"4",
")",
",",
"outOfService",
"(",
"5",
")",
",",
"contactPending",
"(",
"6",
")",
",",
"deprecated",
"(",
"7",
")",
",",
"redirect",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute identifies in which Principal Core operation mode the Core is currently functioning. active: The CCAP Core is actively providing service(s) to the RPD as a Principal or Auxiliary Core. backup: The CCAP Core is configured to provide backup service for an Active Core. notActing: The CCAP Core is not prepared to act as an Active or Backup CCAP Core. decisionPending: The CCAP Core requires further information to make a decision on acting for the RPD or redirecting the RPD. outOfService: An error occurred during the initialization process with the CCAP Core or the RPD has been instructed to place the CCAP Core in Out-Of-Service mode. contactPending: The initial state after configuring the CCAP Core. The CCAP Core has not yet been contacted by the RPD. deprecated: Reserved. redirect: A CCAP Core wishing to redirect an RPD does this by sending an IRA message with the core mode set to 'redirect'. It is the mode for the CCAP Core after it has instructed the RPD to redirect to an alternate Core.\"",
"::=",
"{",
"docsRphyRpdDevCoresConnectedEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
1
],
[
"backup",
2
],
[
"notActing",
3
],
[
"decisionPending",
4
],
[
"outOfService",
5
],
[
"contactPending",
6
],
[
"deprecated",
7
],
[
"redirect",
8
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute identifies in which Principal Core operation mode the Core is currently functioning. active: The CCAP Core is actively providing service(s) to the RPD as a Principal or Auxiliary Core. backup: The CCAP Core is configured to provide backup service for an Active Core. notActing: The CCAP Core is not prepared to act as an Active or Backup CCAP Core. decisionPending: The CCAP Core requires further information to make a decision on acting for the RPD or redirecting the RPD. outOfService: An error occurred during the initialization process with the CCAP Core or the RPD has been instructed to place the CCAP Core in Out-Of-Service mode. contactPending: The initial state after configuring the CCAP Core. The CCAP Core has not yet been contacted by the RPD. deprecated: Reserved. redirect: A CCAP Core wishing to redirect an RPD does this by sending an IRA message with the core mode set to 'redirect'. It is the mode for the CCAP Core after it has instructed the RPD to redirect to an alternate Core."
],
null,
null,
null,
null
]
}Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute identifies in which Principal Core
operation mode the Core is currently functioning.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the core mode set to 'redirect'.
It is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:54.895530+00:00.
Status in source: current.
Names: docsRphyRpdDevCoresConnectedCoreMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"docsRphyRpdDevCoresConnectedCoreMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"1",
")",
",",
"backup",
"(",
"2",
")",
",",
"notActing",
"(",
"3",
")",
",",
"decisionPending",
"(",
"4",
")",
",",
"outOfService",
"(",
"5",
")",
",",
"contactPending",
"(",
"6",
")",
",",
"deprecated",
"(",
"7",
")",
",",
"redirect",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute indicates the role in which the CCAP core is currently acting for the RPD. It also identifies two intermediate states ('decisionPending' and 'contactPending') in which the role of the CCAP Core is still to be determined. active: The CCAP Core is actively providing service(s) to the RPD as a Principal or Auxiliary Core. backup: The CCAP Core is configured to provide backup service for an Active CCAP Core. notActing: The CCAP Core is not prepared to act as an Active or Backup CCAP Core. decisionPending: The CCAP Core requires further information to make a decision on acting for the RPD or redirecting the RPD. outOfService: An error occurred during the initialization process with the CCAP Core or the RPD has been instructed to place the CCAP Core in Out-Of-Service mode. contactPending: The initial state after configuring the CCAP Core. The CCAP Core has not yet been contacted by the RPD. deprecated: Reserved. redirect: A CCAP Core wishing to redirect an RPD does this by sending an IRA message with the CoreMode set to 'redirect'. This is the mode for the CCAP Core after it has instructed the RPD to redirect to an alternate CCAP Core.\"",
"::=",
"{",
"docsRphyRpdDevCoresConnectedEntry",
"8",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
1
],
[
"backup",
2
],
[
"notActing",
3
],
[
"decisionPending",
4
],
[
"outOfService",
5
],
[
"contactPending",
6
],
[
"deprecated",
7
],
[
"redirect",
8
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute indicates the role in which the CCAP core is currently acting for the RPD. It also identifies two intermediate states ('decisionPending' and 'contactPending') in which the role of the CCAP Core is still to be determined. active: The CCAP Core is actively providing service(s) to the RPD as a Principal or Auxiliary Core. backup: The CCAP Core is configured to provide backup service for an Active CCAP Core. notActing: The CCAP Core is not prepared to act as an Active or Backup CCAP Core. decisionPending: The CCAP Core requires further information to make a decision on acting for the RPD or redirecting the RPD. outOfService: An error occurred during the initialization process with the CCAP Core or the RPD has been instructed to place the CCAP Core in Out-Of-Service mode. contactPending: The initial state after configuring the CCAP Core. The CCAP Core has not yet been contacted by the RPD. deprecated: Reserved. redirect: A CCAP Core wishing to redirect an RPD does this by sending an IRA message with the CoreMode set to 'redirect'. This is the mode for the CCAP Core after it has instructed the RPD to redirect to an alternate CCAP Core."
],
null,
null,
null,
null
]
}Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.074775+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.180890+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.289076+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:55.938082+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:56.205690+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:56.354948+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:56.429401+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.003028+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.394938+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.424309+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:57.542970+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:58.089920+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['InterfaceIndex', 'TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download DOCS-RPHY-MIB-2023-10-12.txtDownloaded: 2026-10-26T22:49:58.579257+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:58.575041+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:49:58.705674+00:00.
Module: DOCS-RPHY-MIB
docsRphyRpdDevCoresConnectedCoreMode OBJECT-TYPE
SYNTAX INTEGER {
active(1),
backup(2),
notActing(3),
decisionPending(4),
outOfService(5),
contactPending(6),
deprecated(7),
redirect(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute indicates the role in which the CCAP
core is currently acting for the RPD. It also identifies two
intermediate states ('decisionPending' and 'contactPending')
in which the role of the CCAP Core is still to be determined.
active: The CCAP Core is actively providing service(s)
to the RPD as a Principal or Auxiliary Core.
backup: The CCAP Core is configured to provide
backup service for an Active CCAP Core.
notActing: The CCAP Core is not prepared to act
as an Active or Backup CCAP Core.
decisionPending: The CCAP Core requires further
information to make a decision on acting for the
RPD or redirecting the RPD.
outOfService: An error occurred during the
initialization process with the CCAP Core or
the RPD has been instructed to place the CCAP
Core in Out-Of-Service mode.
contactPending: The initial state after configuring
the CCAP Core. The CCAP Core has not yet been
contacted by the RPD.
deprecated: Reserved.
redirect: A CCAP Core wishing to redirect an RPD does this by
sending an IRA message with the CoreMode set to 'redirect'.
This is the mode for the CCAP Core after it has instructed the
RPD to redirect to an alternate CCAP Core."
::= { docsRphyRpdDevCoresConnectedEntry 8 }{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Downloaded: 2026-10-26T22:47:25.372984+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.1 | docsRphyRpdCoresConnectedCoreId, docsRphyRpdDevCoresConnectedCoreId, docsRphyRpdDevCoresConnectedIndex | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.2 | docsRphyRpdCoresConnectedAddressType, docsRphyRpdDevCoresConnectedAddressType, docsRphyRpdDevCoresConnectedCoreId | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.3 | docsRphyRpdCoresConnectedAddress, docsRphyRpdDevCoresConnectedAddress, docsRphyRpdDevCoresConnectedAddressType | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.4 | docsRphyRpdCoresConnectedIsPrincipal, docsRphyRpdDevCoresConnectedIsPrincipal, docsRphyRpdDevCoresConnectedAddress | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.5 | docsRphyRpdCoresConnectedName, docsRphyRpdDevCoresConnectedName, docsRphyRpdDevCoresConnectedIsPrincipal | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.6 | docsRphyRpdCoresConnectedVendorId, docsRphyRpdDevCoresConnectedVendorId, docsRphyRpdDevCoresConnectedName | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.7 | docsRphyRpdDevCoresConnectedCoreMode, docsRphyRpdDevCoresConnectedVendorId | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.9 | docsRphyRpdDevCoresConnectedCoreFunction, docsRphyRpdDevCoresConnectedInitConfigComplete | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.10 | docsRphyRpdDevCoresConnectedAuxCoreGcpConnectionStatus, docsRphyRpdDevCoresConnectedCoreFunction | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.11 | docsRphyRpdDevCoresConnectedAuxCoreGcpConnectionStatus | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.12 | docsRphyRpdDevCoresConnectedAuxCoreRpdState | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.13 | docsRphyRpdDevCoresConnectedResourceSetIndex | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.14 | docsRphyRpdDevCoresConnectedGcpBackupConnectionConfig | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.15 | docsRphyRpdDevCoresConnectedGcpConnectionStatus | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.16 | docsRphyRpdDevCoresConnectedGcpBackupCoreStatus | 0 | 0 | |
| 1.3.6.1.4.1.4491.2.1.30.1.1.4.1.17 | docsRphyRpdDevCoresConnectedAuthenticationStatus | 0 | 0 |