Reference record for OID 1.3.6.1.4.1.4491.2.1.30.1.2.3.1.9

docsRphyRpdIfEnetOperStatus

Status in source: current.

Names: docsRphyRpdIfEnetOperStatus

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "docsRphyRpdIfEnetOperStatus",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    ",",
    "testing",
    "(",
    "3",
    ")",
    ",",
    "unknown",
    "(",
    "4",
    ")",
    ",",
    "dormant",
    "(",
    "5",
    ")",
    ",",
    "notPresent",
    "(",
    "6",
    ")",
    ",",
    "lowerLayerDown",
    "(",
    "7",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This attribute reports the current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If AdminStatus is down(2) then ifOperStatus should be down(2). If AdminStatus is changed to up(1), then OperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(6) state if the interface has missing (typically, hardware) components.\"",
    "::=",
    "{",
    "docsRphyRpdIfEnetEntry",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "up",
            1
          ],
          [
            "down",
            2
          ],
          [
            "testing",
            3
          ],
          [
            "unknown",
            4
          ],
          [
            "dormant",
            5
          ],
          [
            "notPresent",
            6
          ],
          [
            "lowerLayerDown",
            7
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This attribute reports the current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If AdminStatus is down(2) then ifOperStatus should be down(2). If AdminStatus is changed to up(1), then OperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incoming connection); it should remain in the down(2) state if and only if there is a fault that prevents it from going to the up(1) state; it should remain in the notPresent(6) state if the interface has missing (typically, hardware) components."
    ],
    null,
    null,
    null,
    null
  ]
}

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2016-09-29.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2016-09-29.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:52.609764+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2016-12-15.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2016-12-15.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:52.713300+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2017-04-13.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2017-04-13.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:53.164526+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2017-08-10.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2017-08-10.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:53.646573+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2017-11-16.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2017-11-16.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:53.785025+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2018-04-12.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2018-04-12.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:53.813434+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2018-07-26.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2018-07-26.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:54.177098+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2018-10-18.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2018-10-18.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:54.895530+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-01-24.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX  INTEGER {
                  up(1),        
                  down(2),
                  testing(3),  
                  unknown(4),   
                  dormant(5),
                  notPresent(6),    
                  lowerLayerDown(7) 
              }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
              "This attribute reports the current operational state of 
               the interface. The testing(3) state indicates that no 
               operational packets can be passed.  If AdminStatus is 
               down(2) then ifOperStatus should be down(2).  If 
               AdminStatus is changed to up(1), then OperStatus should 
               change to up(1) if the interface is ready to transmit and 
               receive network traffic; it should change to dormant(5) if 
               the interface is waiting for external actions (such as a 
               serial line waiting for an incoming connection); it should 
               remain in the down(2) state if and only if there is a fault 
               that prevents it from going to the up(1) state; it should 
               remain in the notPresent(6) state if the interface has 
               missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'AutonomousType', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'DOCS-IETF-BPI2-MIB': ['DocsX509ASN1DEREncodedCertificate'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-01-24.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.074775+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-06-13.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-06-13.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.180890+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2019-09-26.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2019-09-26.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.289076+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-01-09.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-01-09.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:55.938082+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-05-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-05-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.205690+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2020-10-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2020-10-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.354948+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-03-11.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-03-11.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:56.429401+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2021-10-21.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2021-10-21.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.003028+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-01-20.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-01-20.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.394938+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-03-31.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-03-31.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.424309+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-06-30.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-06-30.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:57.542970+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2022-12-01.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2022-12-01.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.089920+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2023-10-12.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['InterfaceIndex', 'TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.

  · Download DOCS-RPHY-MIB-2023-10-12.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.579257+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2024-01-18.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2024-01-18.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.575041+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB-2025-01-23.txt

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB-2025-01-23.txt
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:49:58.705674+00:00.

• CableLabs official current and historical MIBs · Publisher's source file: DOCS-RPHY-MIB.mib

  Module: DOCS-RPHY-MIB

  Published definition

  docsRphyRpdIfEnetOperStatus OBJECT-TYPE
      SYNTAX      INTEGER {
                           up(1),        
                           down(2),
                           testing(3),  
                           unknown(4),   
                           dormant(5),
                           notPresent(6),    
                           lowerLayerDown(7) 
                          }
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
          "This attribute reports the current operational state of 
           the interface. The testing(3) state indicates that no 
           operational packets can be passed.  If AdminStatus is 
           down(2) then ifOperStatus should be down(2).  If 
           AdminStatus is changed to up(1), then OperStatus should 
           change to up(1) if the interface is ready to transmit and 
           receive network traffic; it should change to dormant(5) if 
           the interface is waiting for external actions (such as a 
           serial line waiting for an incoming connection); it should 
           remain in the down(2) state if and only if there is a fault 
           that prevents it from going to the up(1) state; it should 
           remain in the notPresent(6) state if the interface has 
           missing (typically, hardware) components."
      ::= { docsRphyRpdIfEnetEntry 9 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'IP-MIB': ['IpAddressOriginTC', 'IpAddressStatusTC', 'Ipv6AddressIfIdentifierTC'], 'SNMPv2-TC': ['TruthValue', 'MacAddress', 'TimeStamp', 'DateAndTime', 'PhysAddress', 'TEXTUAL-CONVENTION'], 'ENTITY-MIB': ['PhysicalIndex', 'PhysicalIndexOrZero'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Gauge32', 'Counter32', 'Counter64', 'Integer32'], 'DOCS-IF-MIB': ['TenthdB', 'TenthdBmV'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'UUID-TC-MIB': ['UUIDorZero'], 'CLAB-DEF-MIB': ['clabProjDocsis'], 'DOCS-IF3-MIB': ['IfDirection', 'docsIf3CmtsCmRegStatusId'], 'IANAifType-MIB': ['IANAifType'], 'IANA-ENTITY-MIB': ['IANAPhysicalClass'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber', 'InetVersion', 'InetAddressPrefixLength'], 'ENTITY-SENSOR-MIB': ['EntitySensorDataType', 'EntitySensorDataScale', 'EntitySensorPrecision', 'EntitySensorValue', 'EntitySensorStatus'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

  · Download DOCS-RPHY-MIB.mib
  Source location: DOCS-RPHY-MIB::docsRphyRpdIfEnetOperStatus.
  Source version and references

  Downloaded: 2026-10-26T22:47:25.372984+00:00.