Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"sfpDiagRxTecCurrent",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Measured Laser Temperature or Wavelength. For DWDM applications, the diagnostic interface report either laser wavelength or temperature, with a given module’s reporting defined by bit 1 of the object sfpConfigOptionalWdm. The reported TEC current is defined as a positive number for cooling and a negative number for heating starting at -3276.8. The increments are of 0.1 steps yielding a total range of -3276.8 to +3276.7, The accuracy of the TEC current monitor is vendor specific but must be better than ±15% of the maximum TEC current as stored in the TEC Current High Alarm Threshold\"",
"REFERENCE",
"\"DWDM MSA Table 2.3.21.\"",
"::=",
"{",
"sfpDiagEntry",
"41",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Measured Laser Temperature or Wavelength. For DWDM applications, the diagnostic interface report either laser wavelength or temperature, with a given module’s reporting defined by bit 1 of the object sfpConfigOptionalWdm. The reported TEC current is defined as a positive number for cooling and a negative number for heating starting at -3276.8. The increments are of 0.1 steps yielding a total range of -3276.8 to +3276.7, The accuracy of the TEC current monitor is vendor specific but must be better than ±15% of the maximum TEC current as stored in the TEC Current High Alarm Threshold"
],
[
"REFERENCE",
"DWDM MSA Table 2.3.21."
],
null,
null,
null
]
}