OID reference
1.3.6.1.4.1.4515.1.11.1.1
The dynamic Transponding table. The table contains for each transponding connection two entries, one for each direction. The index to the table is the ifIndex of both interfaces because in the case of one of the APS configuration we define a one-to-many connection. The ifType valued used for the index is: 196.
Identification
{1 3 6 1 4 1 4515 1 11 1 1}
Definitions may combine these properties differently.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
optXpdConnConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptXpdConnConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The dynamic Transponding table. The table contains for each
transponding connection two entries, one for each direction.
The index to the table is the ifIndex of both interfaces
because in the case of one of the APS configuration we define
a one-to-many connection.
The ifType valued used for the index is: 196."
::= { slOptConn 1 }optApsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptApsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects to configure APS
(Automatic Protection Switching) feature in a Optical
Channel. APS is the ability to configure a pair of Optical
connections for redundancy so that the hardware will
automatically switch the active connection from working connection
to the protection connection or vice versa, within 50ms,
when the active connection fails.
The optical connections are specified in the
optXpdConnConfigTable in the SL-OPT-MIB.
The APS is defined be specifying two entries in this table
the backup each other.
The optXpdConnConfigTable defines two entries for each dircetion
of the connection.
Only one of the two entries is used by the optical aps table.
The direction that is used is the direction from the User to Network."
::= { slOptApsConfig 1 }optApsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF OptApsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects to configure APS
(Automatic Protection Switching) feature in a Optical
Channel. APS is the ability to configure a pair of Optical
connections for redundancy so that the hardware will
automatically switch the active connection from working connection
to the protection connection or vice versa, within 50ms,
when the active connection fails.
The optical connections are specified in the
optXpdConnConfigTable in the SL-OPT-MIB.
The APS is defined be specifying two entries in this table
the backup each other.
The optXpdConnConfigTable defines two entries for each dircetion
of the connection.
Only one of the two entries is used by the optical aps table.
The direction that is used is the direction from the User to Network."
::= { slOptApsConfig 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The dynamic Transponding table. The table contains for each transponding connection two entries, one for each direction. The index to the table is the ifIndex of both interfaces because in the case of one of the APS configuration we define a one-to-many connection. The ifType valued used for the index is: 196.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
This table contains objects to configure APS (Automatic Protection Switching) feature in a Optical Channel. APS is the ability to configure a pair of Optical connections for redundancy so that the hardware will automatically switch the active connection from working connection to the protection connection or vice versa, within 50ms, when the active connection fails. The optical connections are specified in the optXpdConnConfigTable in the SL-OPT-MIB. The APS is defined be specifying two entries in this table the backup each other. The optXpdConnConfigTable defines two entries for each dircetion of the connection. Only one of the two entries is used by the optical aps table. The direction that is used is the direction from the User to Network.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: optXpdConnConfigTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"optXpdConnConfigTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"OptXpdConnConfigEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The dynamic Transponding table. The table contains for each transponding connection two entries, one for each direction. The index to the table is the ifIndex of both interfaces because in the case of one of the APS configuration we define a one-to-many connection. The ifType valued used for the index is: 196.\"",
"::=",
"{",
"slOptConn",
"1",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"OptXpdConnConfigEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The dynamic Transponding table. The table contains for each transponding connection two entries, one for each direction. The index to the table is the ifIndex of both interfaces because in the case of one of the APS configuration we define a one-to-many connection. The ifType valued used for the index is: 196."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: SL-OPT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SL-NE-MIB': ['sitelight'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'TimeStamp', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount']}Related source files and packages:
Status in source: current.
Names: optApsConfigTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"optApsConfigTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"OptApsConfigEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"This table contains objects to configure APS (Automatic Protection Switching) feature in a Optical Channel. APS is the ability to configure a pair of Optical connections for redundancy so that the hardware will automatically switch the active connection from working connection to the protection connection or vice versa, within 50ms, when the active connection fails. The optical connections are specified in the optXpdConnConfigTable in the SL-OPT-MIB. The APS is defined be specifying two entries in this table the backup each other. The optXpdConnConfigTable defines two entries for each dircetion of the connection. Only one of the two entries is used by the optical aps table. The direction that is used is the direction from the User to Network.\"",
"::=",
"{",
"slOptApsConfig",
"1",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"OptApsConfigEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This table contains objects to configure APS (Automatic Protection Switching) feature in a Optical Channel. APS is the ability to configure a pair of Optical connections for redundancy so that the hardware will automatically switch the active connection from working connection to the protection connection or vice versa, within 50ms, when the active connection fails. The optical connections are specified in the optXpdConnConfigTable in the SL-OPT-MIB. The APS is defined be specifying two entries in this table the backup each other. The optXpdConnConfigTable defines two entries for each dircetion of the connection. Only one of the two entries is used by the optical aps table. The direction that is used is the direction from the User to Network."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: SL-OPT-APS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SL-NE-MIB': ['sitelight'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Opaque', 'Gauge32', 'Counter32', 'TimeTicks'], 'SL-MAIN-MIB': ['slmTrapLogId'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Observium Community archive.
Module: SL-OPT-APS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SL-NE-MIB': ['sitelight'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter32', 'TimeTicks'], 'SL-MAIN-MIB': ['slmTrapLogId'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.11.1.1.1 | optApsConfigEntry, optXpdConnConfigEntry | 22 | 22 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.11.1.2 | eqptApsConfigTable, optXpd10ConnConfigTable | 1 | 5 |