OID reference
1.3.6.1.4.1.4515.1.11.1.2.1.3
This variable tells the rate of the traffic used by this interface. The value should be specified in Kbps. The value is translate by the agent to the rate supported by the hardware device units.
Identification
{1 3 6 1 4 1 4515 1 11 1 2 1 3}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In SL-OPT-APS-MIB, the row index eqptApsConfigDummyIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.4515.1.11.1.2.1.3.<eqptApsConfigDummyIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index variants: eqptApsConfigDummyIndex; optXpd10ConnConfigIngressIf.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4515.1.11.1.2.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
optXpd10ConnConfigRateControlOper OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable tells the rate of the traffic used
by this interface.
The value should be specified in Kbps.
The value is translate by the agent to the rate supported
by the hardware device units."
::= { optXpd10ConnConfigEntry 3 }eqptApsConfigMate OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address of the mate device."
::= { eqptApsConfigEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This variable tells the rate of the traffic used by this interface. The value should be specified in Kbps. The value is translate by the agent to the rate supported by the hardware device units.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
The IP address of the mate device.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: optXpd10ConnConfigRateControlOper
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"optXpd10ConnConfigRateControlOper",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This variable tells the rate of the traffic used by this interface. The value should be specified in Kbps. The value is translate by the agent to the rate supported by the hardware device units.\"",
"::=",
"{",
"optXpd10ConnConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variable tells the rate of the traffic used by this interface. The value should be specified in Kbps. The value is translate by the agent to the rate supported by the hardware device units."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: SL-OPT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SL-NE-MIB': ['sitelight'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'TimeStamp', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount']}Related source files and packages:
Status in source: current.
Names: eqptApsConfigMate
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eqptApsConfigMate",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The IP address of the mate device.\"",
"::=",
"{",
"eqptApsConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IP address of the mate device."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: SL-OPT-APS-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SL-NE-MIB': ['sitelight'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'Integer32', 'IpAddress', 'Opaque', 'Gauge32', 'Counter32', 'TimeTicks'], 'SL-MAIN-MIB': ['slmTrapLogId'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount', 'PerfTotalCount']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.11.1.2.1.1 | eqptApsConfigDummyIndex, optXpd10ConnConfigIngressIf | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.11.1.2.1.2 | eqptApsConfigRole, optXpd10ConnConfigEgressIf | 0 | 0 | |
| 1.3.6.1.4.1.4515.1.11.1.2.1.4 | eqptApsConfigLinkStatus, optXpd10ConnConfigLosPropagation | 0 | 0 |