Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"slSonetApsConfigActiveRequest",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"slSonetApsOther",
"(",
"1",
")",
",",
"slSonetApsRevertive",
"(",
"2",
")",
",",
"slSonetApsManual",
"(",
"3",
")",
",",
"slSonetApsSignalDegrade",
"(",
"4",
")",
",",
"slSonetApsSignalFailure",
"(",
"5",
")",
",",
"slSonetApsForceSwitch",
"(",
"6",
")",
",",
"slSonetApsRemoteRequest",
"(",
"7",
")",
",",
"slSonetApsLockOut",
"(",
"8",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The Active Switch APS request: slSonetApsRevertive : Switch back to working line after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. slSonetApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. slSonetApsSignalDefectLow : Switch happened because threshold for 'slSonetApsSigFaultBER' was exceeded. slSonetApsSignalDefectHigh : Same as above, but higher priority. slSonetApsSignalFailureLow : Switch happened because threshold for 'slSonetApsSigDegradeBER' was exceeded. slSonetApsSignalFailureHigh : Same as above, but higher priority. slSonetApsForceSwitch : Forced switch forces hardware to switch the active line even if the other line (could be working line or protection line) is in alarm. slSonetApsLockOut : This is the highest priority switch. This will override all other requests. slSonetApsRemoteRequest : indicates that the local switchover was in response to a remote request to switch. slSonetApsLockOut : indicates that the last switchover to the working occurred because of protection lockout.\"",
"::=",
"{",
"slSonetApsConfigEntry",
"20",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"slSonetApsOther",
1
],
[
"slSonetApsRevertive",
2
],
[
"slSonetApsManual",
3
],
[
"slSonetApsSignalDegrade",
4
],
[
"slSonetApsSignalFailure",
5
],
[
"slSonetApsForceSwitch",
6
],
[
"slSonetApsRemoteRequest",
7
],
[
"slSonetApsLockOut",
8
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Active Switch APS request: slSonetApsRevertive : Switch back to working line after the Wait-to-Restore interval is over, and failures are cleared. It is the lowest priority. slSonetApsManual : Manual switch causes APS switch unless a request of equal or higher priority is in effect. slSonetApsSignalDefectLow : Switch happened because threshold for 'slSonetApsSigFaultBER' was exceeded. slSonetApsSignalDefectHigh : Same as above, but higher priority. slSonetApsSignalFailureLow : Switch happened because threshold for 'slSonetApsSigDegradeBER' was exceeded. slSonetApsSignalFailureHigh : Same as above, but higher priority. slSonetApsForceSwitch : Forced switch forces hardware to switch the active line even if the other line (could be working line or protection line) is in alarm. slSonetApsLockOut : This is the highest priority switch. This will override all other requests. slSonetApsRemoteRequest : indicates that the local switchover was in response to a remote request to switch. slSonetApsLockOut : indicates that the last switchover to the working occurred because of protection lockout."
],
null,
null,
null,
null
]
}