OID reference
1.3.6.1.4.1.4526.10.1.2.4.10
The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface.
Identification
{1 3 6 1 4 1 4526 10 1 2 4 10}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | enable | 1, 2 |
| 1 | none | 3 |
| 2 | dhcp | 3 |
| 2 | disable | 1, 2 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4526.10.1.2.4.10.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 5 distinct definitions; some records may not include a definition.
agentServicePortIpv6AddressAutoConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv6 address autoconfig allows the device to perform IPv6
stateless address auto-configuration to discover prefixes on the
link and then to add the eui-64 based addresses to the serviceport interface."
DEFVAL { enable }
::= { agentServicePortConfigGroup 10 }agentServicePortIpv6AddressAutoConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ipv6 address autoconfig allows the device to perform IPv6
stateless address auto-configuration to discover prefixes on the
link and then to add the eui-64 based addresses to the serviceport interface."
DEFVAL { enable }
::= { agentServicePortConfigGroup 10 }agentServicePortIpv6AddressAutoConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ipv6 address autoconfig allows the device to perform IPv6
stateless address auto-configuration to discover prefixes on the
link and then to add the eui-64 based addresses to the serviceport interface."
DEFVAL { enable }
::= { agentServicePortConfigGroup 10 }agentServicePortIpv6AddressAutoConfig OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The ipv6 address autoconfig allows the device to perform IPv6
stateless address auto-configuration to discover prefixes on the
link and then to add the eui-64 based addresses to the serviceport interface."
DEFVAL { enable }
::= { agentServicePortConfigGroup 10 }agentServicePortIpv6ConfigProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
dhcp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Service Port.s IPv6 protocol configured on the switch."
::= { agentServicePortConfigGroup 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface.
NETGEAR official product and EOL MIB downloadsNETGEAR MIB copies (LibreNMS/Observium Community)
Description 2
The Service Port.s IPv6 protocol configured on the switch.
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: agentServicePortIpv6AddressAutoConfig
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentServicePortIpv6AddressAutoConfig",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface.\"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"agentServicePortConfigGroup",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m5300v11.0.0.31-mibs.zip.
Same file in m5300v11.0.0.28-mibs.zip.
Same file in m5300v11.0.0.23-mibs.zip.
Same file in m5300v11.0.0.18-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m5300v11.0.0.40-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m7100-24xv11.0.0.31-mibs.zip.
Same file in m7100-24xv11.0.0.28-mibs.zip.
Same file in m7100-24xv11.0.0.24-mibs.zip.
Same file in m7100-24xv11.0.0.18-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Status in source: current.
Names: agentServicePortIpv6AddressAutoConfig
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentServicePortIpv6AddressAutoConfig",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface.\"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"agentServicePortConfigGroup",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The ipv6 address autoconfig allows the device to perform IPv6 stateless address auto-configuration to discover prefixes on the link and then to add the eui-64 based addresses to the serviceport interface."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Module: NETGEAR-SWITCHING-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.30-mibs.zip.
Same file in m4100v10.0.2.26-mibs.zip.
Same file in m4100v10.0.2.20-mibs.zip.
Same file in M4100_mibs-v10.0.2.13.zip.
Module: NETGEAR-SWITCHING-MIB
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in m4100v10.0.2.35-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.9-mibs.zip.
Same file in m4200v12.0.2.20-mibs.zip.
Same file in m4200v12.0.2.12-mibs.zip.
Same file in m4200v12.0.2.10-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.0.19-mibs.zip.
Same file in m4200-mibs-v12.0.0.15.zip.
Module: NETGEAR-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Module: NETGEAR-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in m4200v12.0.2.40-mibs.zip.
Same file in m4200v12.0.2.36-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.14-mibs.zip.
Same file in M4250H-v13.0.4.13-mibs.zip.
Same file in M4250L-v13.0.4.14-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.19-mibs.zip.
Same file in M4250H-v13.0.4.17-mibs.zip.
Same file in M4250L-v13.0.4.19-mibs.zip.
Module: NETGEAR-SWITCHING-MIB
Same published definition (formatting differs; exact original is in the source file)
{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'Gauge32', 'TimeTicks', 'OBJECT-IDENTITY'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanId', 'VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId', 'VlanIdOrNone'], 'IANAifType-MIB': ['IANAifType'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetPortNumber'], 'NETGEAR-LOGGING-MIB': ['AgentLogSeverity']}Related source files and packages:
Same file in M4250H-v13.0.4.26-mibs.zip.
Same file in M4250H-v13.0.4.23-mibs.zip.
Same file in M4250L-v13.0.4.26-mibs.zip.
Status in source: current.
Names: agentServicePortIpv6ConfigProtocol
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentServicePortIpv6ConfigProtocol",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"1",
")",
",",
"dhcp",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The Service Port.s IPv6 protocol configured on the switch.\"",
"::=",
"{",
"agentServicePortConfigGroup",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
1
],
[
"dhcp",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The Service Port.s IPv6 protocol configured on the switch."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Netdisco archive.
Module: FASTPATH-SWITCHING-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'IpAddress', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress'], 'Q-BRIDGE-MIB': ['VlanIndex', 'dot1qVlanIndex', 'dot1qFdbId'], 'IANAifType-MIB': ['IANAifType'], 'BROADCOM-REF-MIB': ['ng7000managedswitch', 'AgentPortMask'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.1.2.4.1 | agentServicePortIPAddress | 0 | 0 | The switch's ServicePort ip address |
| 1.3.6.1.4.1.4526.10.1.2.4.2 | agentServicePortSubnetMask | 0 | 0 | The switch's ServicePort subnet mask |
| 1.3.6.1.4.1.4526.10.1.2.4.3 | agentServicePortDefaultGateway | 0 | 0 | The switch's ServicePort default gateway |
| 1.3.6.1.4.1.4526.10.1.2.4.4 | agentServicePortBurnedInMacAddress | 0 | 0 | The switch's ServicePort Burned-In MAC address |
| 1.3.6.1.4.1.4526.10.1.2.4.5 | agentServicePortConfigProtocol | 0 | 0 | The switch's ServicePort config protocol |
| 1.3.6.1.4.1.4526.10.1.2.4.6 | agentServicePortProtocolDhcpRenew, agentServicePortIpv6AdminMode | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.2.4.7 | agentServicePortIpv6AdminMode, agentServicePortIpv6Gateway | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.2.4.8 | agentServicePortIpv6Gateway, agentServicePortIpv6AddrTable | 1 | 5 | |
| 1.3.6.1.4.1.4526.10.1.2.4.9 | agentServicePortIpv6AddrTable, agentServicePortIpv6AddressAutoConfig | 1 | 5 | |
| 1.3.6.1.4.1.4526.10.1.2.4.11 | agentServicePortIpv6ConfigProtocol, agentServicePortDhcp6ClientDuid | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.1.2.4.12 | agentServicePortDhcp6ClientDuid, agentServicePortStatsGroup | 11 | 11 | |
| 1.3.6.1.4.1.4526.10.1.2.4.13 | agentServicePortStatsGroup | 15 | 15 |