OID reference
1.3.6.1.4.1.4526.10.200.1.6
To start/stop the dual control plane detection protocol (DCPDP) on the VPC switch. The following options are supported: enable - Enable the DCPDP on VPC switch disable - Disable the DCPDP on VPC switch Note: The peer VPC switch's IP address has to be configured for the DCPDP to start on an VPC switch.
Identification
{1 3 6 1 4 1 4526 10 200 1 6}
| Value | Name |
|---|---|
| 0 | disable |
| 1 | enable |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4526.10.200.1.6.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
agentPeerDetectionMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To start/stop the dual control plane detection protocol (DCPDP) on the
VPC switch.
The following options are supported:
enable - Enable the DCPDP on VPC switch
disable - Disable the DCPDP on VPC switch
Note: The peer VPC switch's IP address has to be configured for
the DCPDP to start on an VPC switch."
::= { agentVpcConfigGroup 6 }agentPeerDetectionMode OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(0)
}
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To start/stop the dual control plane detection protocol (DCPDP) on the
VPC switch.
The following options are supported:
enable - Enable the DCPDP on VPC switch
disable - Disable the DCPDP on VPC switch
Note: The peer VPC switch's IP address has to be configured for
the DCPDP to start on an VPC switch."
::= { agentVpcConfigGroup 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
To start/stop the dual control plane detection protocol (DCPDP) on the VPC switch. The following options are supported: enable - Enable the DCPDP on VPC switch disable - Disable the DCPDP on VPC switch Note: The peer VPC switch's IP address has to be configured for the DCPDP to start on an VPC switch.
NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: obsolete.
Names: agentPeerDetectionMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentPeerDetectionMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"0",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"To start/stop the dual control plane detection protocol (DCPDP) on the VPC switch. The following options are supported: enable - Enable the DCPDP on VPC switch disable - Disable the DCPDP on VPC switch Note: The peer VPC switch's IP address has to be configured for the DCPDP to start on an VPC switch.\"",
"::=",
"{",
"agentVpcConfigGroup",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
0
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"To start/stop the dual control plane detection protocol (DCPDP) on the VPC switch. The following options are supported: enable - Enable the DCPDP on VPC switch disable - Disable the DCPDP on VPC switch Note: The peer VPC switch's IP address has to be configured for the DCPDP to start on an VPC switch."
],
null,
null,
null,
null
]
}Module: NETGEAR-VPC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask']}Related source files and packages:
Module: NETGEAR-VPC-MIB
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask']}Related source files and packages:
Same file in m7100-24xv11.0.0.31-mibs.zip.
Same file in m7100-24xv11.0.0.28-mibs.zip.
Same file in m7100-24xv11.0.0.24-mibs.zip.
Same file in m7100-24xv11.0.0.18-mibs.zip.
Module: NETGEAR-VPC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask']}Related source files and packages:
Same file in m7100-24xv11.0.0.40-mibs.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.200.1.1 | agentVpcMode | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.2 | agentKeepalivePriority | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.3 | agentKeepaliveTimeout | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.4 | agentKeepaliveMode | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.5 | agentPeerLink | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.7 | agentVpcConfigTable | 1 | 3 | |
| 1.3.6.1.4.1.4526.10.200.1.8 | agentPeerConfigTable | 1 | 6 | |
| 1.3.6.1.4.1.4526.10.200.1.9 | agentVpcDomainConfigTable | 1 | 14 |