OID reference
1.3.6.1.4.1.4526.10.200.1.8.1.3
To configure Self IP address of the VPC switch that is used as the source IP by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In order to set value for the object, need to set values for agentPeerIpAddr, agentSourceIpAddr, agentPeerRowStatus objects simultaneously. To reset the object to…
Identification
{1 3 6 1 4 1 4526 10 200 1 8 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: agentPeerConfigRowIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4526.10.200.1.8.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
agentSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To configure Self IP address of the VPC switch that is used as
the source IP by the dual control plane detection protocol (DCPDP)
on the VPC switches.
NOTE: In order to set value for the object, need to set values for agentPeerIpAddr,
agentSourceIpAddr, agentPeerRowStatus objects simultaneously.
To reset the object to the default state, the agentPeerRowStatus object should be used."
::= { agentPeerConfigEntry 3 }agentSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS obsolete
DESCRIPTION
"To configure Self IP address of the VPC switch that is used as
the source IP by the dual control plane detection protocol (DCPDP)
on the VPC switches.
NOTE: In order to set value for the object, need to set values for agentPeerIpAddr,
agentSourceIpAddr, agentPeerRowStatus objects simultaneously.
To reset the object to the default state, the agentPeerRowStatus object should be used."
::= { agentPeerConfigEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
To configure Self IP address of the VPC switch that is used as the source IP by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In order to set value for the object, need to set values for agentPeerIpAddr, agentSourceIpAddr, agentPeerRowStatus objects simultaneously. To reset the object to the default state, the agentPeerRowStatus object should be used.
NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: obsolete.
Names: agentSourceIpAddr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentSourceIpAddr",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"To configure Self IP address of the VPC switch that is used as the source IP by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In order to set value for the object, need to set values for agentPeerIpAddr, agentSourceIpAddr, agentPeerRowStatus objects simultaneously. To reset the object to the default state, the agentPeerRowStatus object should be used.\"",
"::=",
"{",
"agentPeerConfigEntry",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"To configure Self IP address of the VPC switch that is used as the source IP by the dual control plane detection protocol (DCPDP) on the VPC switches. NOTE: In order to set value for the object, need to set values for agentPeerIpAddr, agentSourceIpAddr, agentPeerRowStatus objects simultaneously. To reset the object to the default state, the agentPeerRowStatus object should be used."
],
null,
null,
null,
null
]
}Module: NETGEAR-VPC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask']}Related source files and packages:
Module: NETGEAR-VPC-MIB
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask']}Related source files and packages:
Same file in m7100-24xv11.0.0.31-mibs.zip.
Same file in m7100-24xv11.0.0.28-mibs.zip.
Same file in m7100-24xv11.0.0.24-mibs.zip.
Same file in m7100-24xv11.0.0.18-mibs.zip.
Module: NETGEAR-VPC-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'IpAddress'], 'NETGEAR-REF-MIB': ['ng7000managedswitch', 'AgentPortMask']}Related source files and packages:
Same file in m7100-24xv11.0.0.40-mibs.zip.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.10.200.1.8.1.1 | agentPeerConfigRowIndex | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.8.1.2 | agentPeerIpAddr | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.8.1.4 | agentDcpdpUdpPort | 0 | 0 | |
| 1.3.6.1.4.1.4526.10.200.1.8.1.5 | agentPeerRowStatus | 0 | 0 |