Status in source: unspecified.
Technical details
{
"smi_kind": "MODULE-IDENTITY",
"definition": [
"etherMIB",
"MODULE-IDENTITY",
"LAST-UPDATED",
[
"literal",
"223230303330393139303030305a22"
],
"ORGANIZATION",
"\"IETF Ethernet Interfaces and Hub MIB Working Group\"",
"CONTACT-INFO",
"\"WG E-mail: hubmib@ietf.org To subscribe: hubmib-request@ietf.org Chair: Dan Romascanu Postal: Avaya Inc. Atidum Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972 3 645 8414 E-mail: dromasca@avaya.com Editor: John Flick Postal: Hewlett-Packard Company 8000 Foothills Blvd. M/S 5557 Roseville, CA 95747-5557 USA Tel: +1 916 785 4018 Fax: +1 916 785 1199 E-mail: johnf@rose.hp.com\"",
"DESCRIPTION",
"\"The MIB module to describe generic objects for ethernet-like network interfaces. The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2002 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002: 'Amendment: Media Access Control (MAC) Parameters, Physical Layer, and Management Parameters for 10 Gb/s Operation', August, 2002. Of particular interest is Clause 30, '10 Mb/s, 100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3635; see the RFC itself for full legal notices.\"",
"REVISION",
[
"literal",
"223230303330393139303030305a22"
],
"DESCRIPTION",
"\"Updated to include support for 10 Gb/sec interfaces. This resulted in the following revisions: - Updated dot3StatsAlignmentErrors and dot3StatsSymbolErrors DESCRIPTIONs to reflect behaviour at 10 Gb/s - Added dot3StatsRateControlAbility and dot3RateControlStatus for management of the Rate Control function in 10 Gb/s WAN applications - Added 64-bit versions of all counters that are used on high-speed ethernet interfaces - Added object groups to contain the new objects - Deprecated etherStatsBaseGroup and split into etherStatsBaseGroup2 and etherStatsHalfDuplexGroup, so that interfaces which can only operate at full-duplex do not need to implement half-duplex-only statistics - Deprecated dot3Compliance and replaced it with dot3Compliance2, which includes the compliance information for the new object groups In addition, the dot3Tests and dot3Errors object identities have been deprecated, since there is no longer a standard method for using them. This version published as RFC 3635.\"",
"REVISION",
[
"literal",
"223139393930383234303430305a22"
],
"DESCRIPTION",
"\"Updated to include support for 1000 Mb/sec interfaces and full-duplex interfaces. This version published as RFC 2665.\"",
"REVISION",
[
"literal",
"223139393830363033323135305a22"
],
"DESCRIPTION",
"\"Updated to include support for 100 Mb/sec interfaces. This version published as RFC 2358.\"",
"REVISION",
[
"literal",
"223139393430323033303430305a22"
],
"DESCRIPTION",
"\"Initial version, published as RFC 1650.\"",
"::=",
"{",
"ng7000managedswitch",
"35",
"}"
],
"syntax_tree": [
[
"LAST-UPDATED",
"200309190000Z"
],
[
"ORGANIZATION",
"IETF Ethernet Interfaces and Hub MIB Working Group"
],
[
"CONTACT-INFO",
"WG E-mail: hubmib@ietf.org To subscribe: hubmib-request@ietf.org Chair: Dan Romascanu Postal: Avaya Inc. Atidum Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972 3 645 8414 E-mail: dromasca@avaya.com Editor: John Flick Postal: Hewlett-Packard Company 8000 Foothills Blvd. M/S 5557 Roseville, CA 95747-5557 USA Tel: +1 916 785 4018 Fax: +1 916 785 1199 E-mail: johnf@rose.hp.com"
],
[
"DESCRIPTION",
"The MIB module to describe generic objects for ethernet-like network interfaces. The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2002 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002: 'Amendment: Media Access Control (MAC) Parameters, Physical Layer, and Management Parameters for 10 Gb/s Operation', August, 2002. Of particular interest is Clause 30, '10 Mb/s, 100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3635; see the RFC itself for full legal notices."
],
[
"Revisions",
[
[
"200309190000Z",
[
"DESCRIPTION",
"Updated to include support for 10 Gb/sec interfaces. This resulted in the following revisions: - Updated dot3StatsAlignmentErrors and dot3StatsSymbolErrors DESCRIPTIONs to reflect behaviour at 10 Gb/s - Added dot3StatsRateControlAbility and dot3RateControlStatus for management of the Rate Control function in 10 Gb/s WAN applications - Added 64-bit versions of all counters that are used on high-speed ethernet interfaces - Added object groups to contain the new objects - Deprecated etherStatsBaseGroup and split into etherStatsBaseGroup2 and etherStatsHalfDuplexGroup, so that interfaces which can only operate at full-duplex do not need to implement half-duplex-only statistics - Deprecated dot3Compliance and replaced it with dot3Compliance2, which includes the compliance information for the new object groups In addition, the dot3Tests and dot3Errors object identities have been deprecated, since there is no longer a standard method for using them. This version published as RFC 3635."
]
],
[
"199908240400Z",
[
"DESCRIPTION",
"Updated to include support for 1000 Mb/sec interfaces and full-duplex interfaces. This version published as RFC 2665."
]
],
[
"199806032150Z",
[
"DESCRIPTION",
"Updated to include support for 100 Mb/sec interfaces. This version published as RFC 2358."
]
],
[
"199402030400Z",
[
"DESCRIPTION",
"Initial version, published as RFC 1650."
]
]
]
]
]
}