Description 1
Indicates whether custom NTP server is to be used.
Sources for this description
NETGEAR official product and EOL MIB downloads
OID reference
1.3.6.1.4.1.4526.100.7.15.12.4
Indicates whether custom NTP server is to be used.
Identification
{1 3 6 1 4 1 4526 100 7 15 12 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | disable | 1 |
| 1 | enable | 1 |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4526.100.7.15.12.4.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
customNtpServer OBJECT-TYPE
SYNTAX INTEGER {
disable (0),
enable (1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether custom NTP server is to be used."
::= { timeSettings 4 }dhcpsIpEnd OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute indicates the ending IP address of DHCP server will give.
***The value can only be set to a IP address in dot format."
::= { dhcpsSettings 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Indicates whether custom NTP server is to be used.
NETGEAR official product and EOL MIB downloads
Description 2
This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.
NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: customNtpServer
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"customNtpServer",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disable",
"(",
"0",
")",
",",
"enable",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates whether custom NTP server is to be used.\"",
"::=",
"{",
"timeSettings",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disable",
0
],
[
"enable",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates whether custom NTP server is to be used."
],
null,
null,
null,
null
]
}Module: WNAP210V2
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in WNAP210V2_V3.7.7.0.mib.
Same file in WNAP210V2_V3.7.4.0.mib.
Same file in WNAP210V2_V3.7.11.4.mib.
Same file in WNAP210V2_V3.6.9.0.mib.
Module: WNAP210V2
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Module: WNAP210V2
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'Counter32', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in WNAP210_V3.0.4.0V2.zip.
Status in source: current.
Names: dhcpsIpEnd
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dhcpsIpEnd",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format.\"",
"::=",
"{",
"dhcpsSettings",
"4",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute indicates the ending IP address of DHCP server will give. ***The value can only be set to a IP address in dot format."
],
null,
null,
null,
null
]
}Module: WAC505
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in WAC505_V8.2.1.16.mib.
Same file in WAC505_V1.5.3.7.mib.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.100.7.15.12.1 | dhcpServerStatus, currentTime | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.2 | dhcpsVlanId, timeZone | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.3 | dhcpsIpStart, ntpClientStatus | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.5 | dhcpsNetMask, ntpAddr | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.6 | dhcpsGateway | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.7 | dhcpsPriDns | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.8 | dhcpsSndDns | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.9 | dhcpsPriWins | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.10 | dhcpsSndWins | 0 | 0 | |
| 1.3.6.1.4.1.4526.100.7.15.12.11 | dhcpsLeaseTime | 0 | 0 |