Description 1
This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited
Sources for this description
NETGEAR official product and EOL MIB downloads
OID reference
1.3.6.1.4.1.4526.100.7.15.2.1.1.23
This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited
Identification
{1 3 6 1 4 1 4526 100 7 15 2 1 1 23}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | aggressive | 2 |
| 5 | moderate | 2 |
| 10 | mild | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In WAC505, the row index wlanIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.4526.100.7.15.2.1.1.23.<wlanIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4526.100.7.15.2.1.1.23
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
maxClientAssociations OBJECT-TYPE
SYNTAX INTEGER(0..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall indicates the max wireless clients that allowed to
associated.When the value is set 0,and the wireless clients are not limited"
::= { wlanSettingEntry 23 }rogueApDetectionPolicy OBJECT-TYPE
SYNTAX INTEGER {
mild(10),
moderate(5),
aggressive(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP.
If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggressive will be 1 sec.
The default value is mild(10)."
::= { wlanSettingEntry 23 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited
NETGEAR official product and EOL MIB downloads
Description 2
This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP. If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggressive will be 1 sec. The default value is mild(10).
NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: maxClientAssociations
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maxClientAssociations",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
".",
".",
"128",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited\"",
"::=",
"{",
"wlanSettingEntry",
"23",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0,
128
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute shall indicates the max wireless clients that allowed to associated.When the value is set 0,and the wireless clients are not limited"
],
null,
null,
null,
null
]
}Module: WAC505
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in WAC505_V8.2.1.16.mib.
Same file in WAC505_V1.5.3.7.mib.
Module: wac540
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Module: wac564
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: rogueApDetectionPolicy
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rogueApDetectionPolicy",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"mild",
"(",
"10",
")",
",",
"moderate",
"(",
"5",
")",
",",
"aggressive",
"(",
"1",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP. If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggressive will be 1 sec. The default value is mild(10).\"",
"::=",
"{",
"wlanSettingEntry",
"23",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"mild",
10
],
[
"moderate",
5
],
[
"aggressive",
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP. If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggressive will be 1 sec. The default value is mild(10)."
],
null,
null,
null,
null
]
}Module: WNAP210V2
See published definition above
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in WNAP210V2_V3.7.7.0.mib.
Same file in WNAP210V2_V3.7.4.0.mib.
Same file in WNAP210V2_V3.7.11.4.mib.
Same file in WNAP210V2_V3.6.9.0.mib.
Module: WNAP210V2
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Module: WNAP210V2
{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'enterprises', 'IpAddress', 'Unsigned32', 'OBJECT-TYPE', 'Counter32', 'NOTIFICATION-TYPE', 'TimeTicks'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in WNAP210_V3.0.4.0V2.zip.
Registration