This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.
Sources for this description
NETGEAR official product and EOL MIB downloads
OID reference
1.3.6.1.4.1.4526.11.16.1.1.1.8
This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.
Identification
{1 3 6 1 4 1 4526 11 16 1 1 1 8}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In POWER-ETHERNET-MIB, the row index consists of these components in order:
pethPsePortGroupIndex (Integer32): one numeric subidentifier for the non-negative value.pethPsePortIndex (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.4526.11.16.1.1.1.8.<pethPsePortGroupIndex>.<pethPsePortIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4526.11.16.1.1.1.8
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 2 distinct definitions; some records may not include a definition.
pethPsePortMPSAbsentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when the PSE state diagram
transitions directly from the state POWER_ON to the
state IDLE due to tmpdo_timer_done being asserted."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.11
aPSEMPSAbsentCounter"
::= { pethPsePortEntry 8 }pethPsePortMPSAbsentCounter OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counter is incremented when the PSE state diagram
transitions directly from the state POWER_ON to the
state IDLE due to tmpdo_timer_done being asserted."
REFERENCE
"IEEE Std 802.3af Section 30.9.1.1.11
aPSEMPSAbsentCounter"
::= { pethPsePortEntry 8 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.
NETGEAR official product and EOL MIB downloads
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: pethPsePortMPSAbsentCounter
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"pethPsePortMPSAbsentCounter",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted.\"",
"REFERENCE",
"\"IEEE Std 802.3af Section 30.9.1.1.11 aPSEMPSAbsentCounter\"",
"::=",
"{",
"pethPsePortEntry",
"8",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This counter is incremented when the PSE state diagram transitions directly from the state POWER_ON to the state IDLE due to tmpdo_timer_done being asserted."
],
[
"REFERENCE",
"IEEE Std 802.3af Section 30.9.1.1.11 aPSEMPSAbsentCounter"
],
null,
null,
null
]
}Module: POWER-ETHERNET-MIB
See published definition above
{'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'mib-2', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'Counter32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'NETGEAR-REF-MIB': ['ng700smartswitch'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in fs728tp_5.0.2.50-mibs.zip.
Module: POWER-ETHERNET-MIB
See published definition above
{'SNMPv2-TC': ['TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'mib-2', 'OBJECT-TYPE', 'Integer32', 'Gauge32', 'Counter32', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'NETGEAR-REF-MIB': ['ng700smartswitch'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.11.16.1.1.1.1 | pethPsePortGroupIndex | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.2 | pethPsePortIndex | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.3 | pethPsePortAdminEnable | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.4 | pethPsePortPowerPairsControlAbility | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.5 | pethPsePortPowerPairs | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.6 | pethPsePortDetectionStatus | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.7 | pethPsePortPowerPriority | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.9 | pethPsePortType | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.10 | pethPsePortPowerClassifications | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.11 | pethPsePortInvalidSignatureCounter | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.12 | pethPsePortPowerDeniedCounter | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.13 | pethPsePortOverLoadCounter | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.16.1.1.1.14 | pethPsePortShortCounter | 0 | 0 |