Description 1
Specifies the Dot1x authentication reason referred by the result index on a port. This object is obsolete. Refer to agentDot1xAuthHistoryResultReasonCode
Sources for this description
NETGEAR official product and EOL MIB downloads
OID reference
1.3.6.1.4.1.4526.11.36.5.1.1.12
Specifies the Dot1x authentication reason referred by the result index on a port. This object is obsolete. Refer to agentDot1xAuthHistoryResultReasonCode
Identification
{1 3 6 1 4 1 4526 11 36 5 1 1 12}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 1 | supplicant-timeout | 1, 2 |
| 2 | eapol-timeout | 1, 2 |
| 3 | radius-request-timeout | 1, 2 |
| 4 | radius-auth-failure | 1, 2 |
| 5 | radius-auth-comm-failure | 1, 2 |
| 6 | radius-challenge-process-invalid-nas-port obsolete, radius-challenge-process-invalid-nas-port no longer supported | 1, 2 |
| 7 | radius-challenge-process-wrong-eap-msg | 1, 2 |
| 8 | radius-request-send-msg-error | 1, 2 |
| 9 | radius-accept-process-invalid-nas-port obsolete, radius-accept-process-invalid-nas-port no longer supported | 1, 2 |
| 10 | radius-accept-process-wrong-eap-msg | 1, 2 |
| 11 | radius-accept-filter-assignment-failure | 1, 2 |
| 12 | radius-accept-diffserv-not-present | 1, 2 |
| 13 | radius-accept-vlan-assignment-failure | 1, 2 |
| 14 | vlan-assignment-feature-not-enabled | 1, 2 |
| 15 | radius-success | 1, 2 |
| 16 | local-auth-user-not-found | 1, 2 |
| 17 | local-auth-user-no-access | 1, 2 |
| 18 | local-auth-md5-validation-failure | 1, 2 |
| 19 | local-auth-invalid-eap-type | 1, 2 |
| 20 | local-failure | 1, 2 |
| 21 | local-success | 1, 2 |
| 22 | radius-invalid-radius-status | 1, 2 |
| 23 | guest-vlan-timer-expiry | 1, 2 |
| 24 | undefined-auth-method | 1, 2 |
| 25 | reject-auth-method | 1, 2 |
| 26 | invalid-auth-method | 1, 2 |
| 27 | auth-method-not-configured | 1, 2 |
| 28 | unauth-vlan-not-created | 1, 2 |
| 29 | guest-vlan-not-created | 1, 2 |
| 30 | radius-accept-invalid-vlan-failure | 1, 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: agentDot1xAuthHistoryResultIfaceIndex, agentDot1xAuthHistoryResultIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4526.11.36.5.1.1.12
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Product context
The NETGEAR catalogue lists MIB files containing this definition with these product and release labels:
These are catalogue release labels, not necessarily MIB revisions. A MIB definition does not establish that a device implements it or permits access.
Available source records contain 3 distinct definitions; some records may not include a definition.
agentDot1xAuthHistoryResultReasonCode OBJECT-TYPE
SYNTAX INTEGER {
supplicant-timeout(1),
eapol-timeout(2),
radius-request-timeout(3),
radius-auth-failure(4),
radius-auth-comm-failure(5),
radius-challenge-process-invalid-nas-port(6), -- obsolete, radius-challenge-process-invalid-nas-port no longer supported
radius-challenge-process-wrong-eap-msg(7),
radius-request-send-msg-error(8),
radius-accept-process-invalid-nas-port(9), -- obsolete, radius-accept-process-invalid-nas-port no longer supported
radius-accept-process-wrong-eap-msg(10),
radius-accept-filter-assignment-failure(11),
radius-accept-diffserv-not-present(12),
radius-accept-vlan-assignment-failure(13),
vlan-assignment-feature-not-enabled(14),
radius-success(15),
local-auth-user-not-found(16),
local-auth-user-no-access(17),
local-auth-md5-validation-failure(18),
local-auth-invalid-eap-type(19),
local-failure(20),
local-success(21),
radius-invalid-radius-status(22),
guest-vlan-timer-expiry(23),
undefined-auth-method(24),
reject-auth-method(25),
invalid-auth-method(26),
auth-method-not-configured(27),
unauth-vlan-not-created(28),
guest-vlan-not-created(29),
radius-accept-invalid-vlan-failure(30)
}
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"Specifies the Dot1x authentication reason
referred by the result index on a port.
This object is obsolete.
Refer to agentDot1xAuthHistoryResultReasonCode"
::= { agentDot1xPortAuthHistoryResultEntry 12 }agentDot1xAuthHistoryResultReasonCode OBJECT-TYPE
SYNTAX INTEGER {
supplicant-timeout(1),
eapol-timeout(2),
radius-request-timeout(3),
radius-auth-failure(4),
radius-auth-comm-failure(5),
radius-challenge-process-invalid-nas-port(6),
radius-challenge-process-wrong-eap-msg(7),
radius-request-send-msg-error(8),
radius-accept-process-invalid-nas-port(9),
radius-accept-process-wrong-eap-msg(10),
radius-accept-filter-assignment-failure(11),
radius-accept-diffserv-not-present(12),
radius-accept-vlan-assignment-failure(13),
vlan-assignment-feature-not-enabled(14),
radius-success(15),
local-auth-user-not-found(16),
local-auth-user-no-access(17),
local-auth-md5-validation-failure(18),
local-auth-invalid-eap-type(19),
local-failure(20),
local-success(21),
radius-invalid-radius-status(22),
guest-vlan-timer-expiry(23),
undefined-auth-method(24),
reject-auth-method(25),
invalid-auth-method(26),
auth-method-not-configured(27),
unauth-vlan-not-created(28),
guest-vlan-not-created(29),
radius-accept-invalid-vlan-failure(30)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the Dot1x authentication reason
refered by the result index on a port."
::= { agentDot1xPortAuthHistoryResultEntry 12 }agentDot1xAuthHistoryResultReasonCode OBJECT-TYPE
SYNTAX INTEGER {
supplicant-timeout(1),
eapol-timeout(2),
radius-request-timeout(3),
radius-auth-failure(4),
radius-auth-comm-failure(5),
radius-challenge-process-invalid-nas-port(6),
radius-challenge-process-wrong-eap-msg(7),
radius-request-send-msg-error(8),
radius-accept-process-invalid-nas-port(9),
radius-accept-process-wrong-eap-msg(10),
radius-accept-filter-assignment-failure(11),
radius-accept-diffserv-not-present(12),
radius-accept-vlan-assignment-failure(13),
vlan-assignment-feature-not-enabled(14),
radius-success(15),
local-auth-user-not-found(16),
local-auth-user-no-access(17),
local-auth-md5-validation-failure(18),
local-auth-invalid-eap-type(19),
local-failure(20),
local-success(21),
radius-invalid-radius-status(22),
guest-vlan-timer-expiry(23),
undefined-auth-method(24),
reject-auth-method(25),
invalid-auth-method(26),
auth-method-not-configured(27),
unauth-vlan-not-created(28),
guest-vlan-not-created(29),
radius-accept-invalid-vlan-failure(30)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Specifies the Dot1x authentication reason
refered by the result index on a port."
::= { agentDot1xPortAuthHistoryResultEntry 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specifies the Dot1x authentication reason referred by the result index on a port. This object is obsolete. Refer to agentDot1xAuthHistoryResultReasonCode
NETGEAR official product and EOL MIB downloads
Description 2
Specifies the Dot1x authentication reason refered by the result index on a port.
NETGEAR official product and EOL MIB downloadsNETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: obsolete.
Names: agentDot1xAuthHistoryResultReasonCode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentDot1xAuthHistoryResultReasonCode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"supplicant-timeout",
"(",
"1",
")",
",",
"eapol-timeout",
"(",
"2",
")",
",",
"radius-request-timeout",
"(",
"3",
")",
",",
"radius-auth-failure",
"(",
"4",
")",
",",
"radius-auth-comm-failure",
"(",
"5",
")",
",",
"radius-challenge-process-invalid-nas-port",
"(",
"6",
")",
",",
"radius-challenge-process-wrong-eap-msg",
"(",
"7",
")",
",",
"radius-request-send-msg-error",
"(",
"8",
")",
",",
"radius-accept-process-invalid-nas-port",
"(",
"9",
")",
",",
"radius-accept-process-wrong-eap-msg",
"(",
"10",
")",
",",
"radius-accept-filter-assignment-failure",
"(",
"11",
")",
",",
"radius-accept-diffserv-not-present",
"(",
"12",
")",
",",
"radius-accept-vlan-assignment-failure",
"(",
"13",
")",
",",
"vlan-assignment-feature-not-enabled",
"(",
"14",
")",
",",
"radius-success",
"(",
"15",
")",
",",
"local-auth-user-not-found",
"(",
"16",
")",
",",
"local-auth-user-no-access",
"(",
"17",
")",
",",
"local-auth-md5-validation-failure",
"(",
"18",
")",
",",
"local-auth-invalid-eap-type",
"(",
"19",
")",
",",
"local-failure",
"(",
"20",
")",
",",
"local-success",
"(",
"21",
")",
",",
"radius-invalid-radius-status",
"(",
"22",
")",
",",
"guest-vlan-timer-expiry",
"(",
"23",
")",
",",
"undefined-auth-method",
"(",
"24",
")",
",",
"reject-auth-method",
"(",
"25",
")",
",",
"invalid-auth-method",
"(",
"26",
")",
",",
"auth-method-not-configured",
"(",
"27",
")",
",",
"unauth-vlan-not-created",
"(",
"28",
")",
",",
"guest-vlan-not-created",
"(",
"29",
")",
",",
"radius-accept-invalid-vlan-failure",
"(",
"30",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"obsolete",
"DESCRIPTION",
"\"Specifies the Dot1x authentication reason referred by the result index on a port. This object is obsolete. Refer to agentDot1xAuthHistoryResultReasonCode\"",
"::=",
"{",
"agentDot1xPortAuthHistoryResultEntry",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"supplicant-timeout",
1
],
[
"eapol-timeout",
2
],
[
"radius-request-timeout",
3
],
[
"radius-auth-failure",
4
],
[
"radius-auth-comm-failure",
5
],
[
"radius-challenge-process-invalid-nas-port",
6
],
[
"radius-challenge-process-wrong-eap-msg",
7
],
[
"radius-request-send-msg-error",
8
],
[
"radius-accept-process-invalid-nas-port",
9
],
[
"radius-accept-process-wrong-eap-msg",
10
],
[
"radius-accept-filter-assignment-failure",
11
],
[
"radius-accept-diffserv-not-present",
12
],
[
"radius-accept-vlan-assignment-failure",
13
],
[
"vlan-assignment-feature-not-enabled",
14
],
[
"radius-success",
15
],
[
"local-auth-user-not-found",
16
],
[
"local-auth-user-no-access",
17
],
[
"local-auth-md5-validation-failure",
18
],
[
"local-auth-invalid-eap-type",
19
],
[
"local-failure",
20
],
[
"local-success",
21
],
[
"radius-invalid-radius-status",
22
],
[
"guest-vlan-timer-expiry",
23
],
[
"undefined-auth-method",
24
],
[
"reject-auth-method",
25
],
[
"invalid-auth-method",
26
],
[
"auth-method-not-configured",
27
],
[
"unauth-vlan-not-created",
28
],
[
"guest-vlan-not-created",
29
],
[
"radius-accept-invalid-vlan-failure",
30
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"obsolete"
],
[
"DESCRIPTION",
"Specifies the Dot1x authentication reason referred by the result index on a port. This object is obsolete. Refer to agentDot1xAuthHistoryResultReasonCode"
],
null,
null,
null,
null
]
}Module: NETGEAR-DOT1X-ADVANCED-FEATURES-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString'], 'NETGEAR-REF-MIB': ['ng700smartswitch'], 'IEEE8021X-PAE-MIB': ['ieee8021XPaePortNumber']}Related source files and packages:
Same file in gs748tv6-v7.0.0.14-mibs.zip.
Same file in gs748tv6-v7.0.0.12-mibs.zip.
Same file in gs748tv6-v7.0.0.10-mibs.zip.
Same file in GS724Tv6-v7.0.0.8-Mibs.zip.
Module: NETGEAR-DOT1X-ADVANCED-FEATURES-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString'], 'NETGEAR-REF-MIB': ['ng700smartswitch'], 'IEEE8021X-PAE-MIB': ['ieee8021XPaePortNumber']}Related source files and packages:
Status in source: current.
Names: agentDot1xAuthHistoryResultReasonCode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"agentDot1xAuthHistoryResultReasonCode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"supplicant-timeout",
"(",
"1",
")",
",",
"eapol-timeout",
"(",
"2",
")",
",",
"radius-request-timeout",
"(",
"3",
")",
",",
"radius-auth-failure",
"(",
"4",
")",
",",
"radius-auth-comm-failure",
"(",
"5",
")",
",",
"radius-challenge-process-invalid-nas-port",
"(",
"6",
")",
",",
"radius-challenge-process-wrong-eap-msg",
"(",
"7",
")",
",",
"radius-request-send-msg-error",
"(",
"8",
")",
",",
"radius-accept-process-invalid-nas-port",
"(",
"9",
")",
",",
"radius-accept-process-wrong-eap-msg",
"(",
"10",
")",
",",
"radius-accept-filter-assignment-failure",
"(",
"11",
")",
",",
"radius-accept-diffserv-not-present",
"(",
"12",
")",
",",
"radius-accept-vlan-assignment-failure",
"(",
"13",
")",
",",
"vlan-assignment-feature-not-enabled",
"(",
"14",
")",
",",
"radius-success",
"(",
"15",
")",
",",
"local-auth-user-not-found",
"(",
"16",
")",
",",
"local-auth-user-no-access",
"(",
"17",
")",
",",
"local-auth-md5-validation-failure",
"(",
"18",
")",
",",
"local-auth-invalid-eap-type",
"(",
"19",
")",
",",
"local-failure",
"(",
"20",
")",
",",
"local-success",
"(",
"21",
")",
",",
"radius-invalid-radius-status",
"(",
"22",
")",
",",
"guest-vlan-timer-expiry",
"(",
"23",
")",
",",
"undefined-auth-method",
"(",
"24",
")",
",",
"reject-auth-method",
"(",
"25",
")",
",",
"invalid-auth-method",
"(",
"26",
")",
",",
"auth-method-not-configured",
"(",
"27",
")",
",",
"unauth-vlan-not-created",
"(",
"28",
")",
",",
"guest-vlan-not-created",
"(",
"29",
")",
",",
"radius-accept-invalid-vlan-failure",
"(",
"30",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the Dot1x authentication reason refered by the result index on a port.\"",
"::=",
"{",
"agentDot1xPortAuthHistoryResultEntry",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"supplicant-timeout",
1
],
[
"eapol-timeout",
2
],
[
"radius-request-timeout",
3
],
[
"radius-auth-failure",
4
],
[
"radius-auth-comm-failure",
5
],
[
"radius-challenge-process-invalid-nas-port",
6
],
[
"radius-challenge-process-wrong-eap-msg",
7
],
[
"radius-request-send-msg-error",
8
],
[
"radius-accept-process-invalid-nas-port",
9
],
[
"radius-accept-process-wrong-eap-msg",
10
],
[
"radius-accept-filter-assignment-failure",
11
],
[
"radius-accept-diffserv-not-present",
12
],
[
"radius-accept-vlan-assignment-failure",
13
],
[
"vlan-assignment-feature-not-enabled",
14
],
[
"radius-success",
15
],
[
"local-auth-user-not-found",
16
],
[
"local-auth-user-no-access",
17
],
[
"local-auth-md5-validation-failure",
18
],
[
"local-auth-invalid-eap-type",
19
],
[
"local-failure",
20
],
[
"local-success",
21
],
[
"radius-invalid-radius-status",
22
],
[
"guest-vlan-timer-expiry",
23
],
[
"undefined-auth-method",
24
],
[
"reject-auth-method",
25
],
[
"invalid-auth-method",
26
],
[
"auth-method-not-configured",
27
],
[
"unauth-vlan-not-created",
28
],
[
"guest-vlan-not-created",
29
],
[
"radius-accept-invalid-vlan-failure",
30
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the Dot1x authentication reason refered by the result index on a port."
],
null,
null,
null,
null
]
}Module: NETGEAR-DOT1X-ADVANCED-FEATURES-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString'], 'NETGEAR-REF-MIB': ['ng700smartswitch'], 'IEEE8021-PAE-MIB': ['dot1xPaePortNumber']}Related source files and packages:
Same file in xs7xxtv7.0.0.24-mibs.zip.
Same file in xs7xxtv7.0.0.20-mibs.zip.
Same file in s3300v6.6.4.26-mibs.zip.
Same file in s3300v6.6.4.25-mibs.zip.
Module: NETGEAR-DOT1X-ADVANCED-FEATURES-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString'], 'NETGEAR-REF-MIB': ['ng700smartswitch'], 'IEEE8021-PAE-MIB': ['dot1xPaePortNumber']}Related source files and packages:
Same file in xs7xxt_6.6.3.2-mibs.zip.
Same file in xs712t-v6.1.0.36-mibs.zip.
Same file in xs712t-v6.1.0.34-mibs.zip.
Same file in xs7xxt6.6.3.3-mibs.zip.
Vendor MIB copy from the Observium Community archive. NETGEAR support.
Module: NG700-DOT1X-ADVANCED-FEATURES-MIB
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'MacAddress', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Unsigned32', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString'], 'NG700-REF-MIB': ['ng700smartswitch'], 'IEEE8021-PAE-MIB': ['dot1xPaePortNumber']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.11.36.5.1.1.1 | agentDot1xAuthHistoryResultIfaceIndex | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.2 | agentDot1xAuthHistoryResultIndex | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.3 | agentDot1xAuthHistoryResultTimeStamp | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.4 | agentDot1xAuthHistoryResultAge | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.5 | agentDot1xAuthHistoryResultMacAddress | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.6 | agentDot1xAuthHistoryResultVlanId | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.7 | agentDot1xAuthHistoryResultAuthStatus | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.8 | agentDot1xAuthHistoryResultAccessStatus | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.9 | agentDot1xAuthHistoryResultFilterID | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.10 | agentDot1xAuthHistoryResultVlanAssigned | 0 | 0 | |
| 1.3.6.1.4.1.4526.11.36.5.1.1.11 | agentDot1xAuthHistoryResultVlanAssignedType | 0 | 0 |