OID reference
1.3.6.1.4.1.4526.17.216.8.1.7
The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligible to become the Designated Router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie…
Identification
{1 3 6 1 4 1 4526 17 216 8 1 7}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlOspfv3IfRtrPriority OBJECT-TYPE
SYNTAX DesignatedRouterPriority
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The priority of this interface. Used in
multi-access networks, this field is used in
the designated-router election algorithm. The
value 0 signifies that the router is not
eligible to become the Designated Router on this
particular network. In the event of a tie in
this value, routers will use their Router ID as
a tie breaker."
DEFVAL { 1 }
::= { rlOspfv3IfEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligible to become the Designated Router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
NETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlOspfv3IfRtrPriority
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlOspfv3IfRtrPriority",
"OBJECT-TYPE",
"SYNTAX",
"DesignatedRouterPriority",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligible to become the Designated Router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"rlOspfv3IfEntry",
"7",
"}"
],
"syntax_tree": [
[
"row",
"DesignatedRouterPriority"
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The priority of this interface. Used in multi-access networks, this field is used in the designated-router election algorithm. The value 0 signifies that the router is not eligible to become the Designated Router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker."
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive. NETGEAR support.
Module: NETGEAR-RADLAN-OSPFV3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['AreaID', 'RouterID', 'Metric', 'BigMetric', 'Status', 'PositiveInteger', 'UpToMaxAge', 'TOSType', 'OspfAuthenticationType', 'HelloRange', 'DesignatedRouterPriority'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'TimeStamp', 'DisplayString'], 'OSPFV3-MIB': ['Ospfv3UpToRefreshIntervalTC', 'Ospfv3DeadIntervalRangeTC', 'Ospfv3RouterIdTC', 'Ospfv3LsIdTC', 'Ospfv3AreaIdTC', 'Ospfv3IfInstIdTC', 'Ospfv3LsaSequenceTC', 'Ospfv3LsaAgeTC'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'mib-2', 'Counter32', 'Gauge32', 'Integer32', 'Unsigned32', 'IpAddress'], 'RFC1213-MIB': ['mib-2'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetAddressIPv6'], 'NETGEAR-RADLAN-MIB': ['rnd'], 'NETGEAR-RADLAN-OSPF-MIB': ['RlOspfProcessID', 'RlOspfFastHelloMultiplierRange', 'RlOspfRestartHelperStatus', 'RlOspfRestartExitReason', 'RlOspfRouterIdType']}Related source files and packages:
Registration