This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
Sources for this description
NETGEAR MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.4526.17.26.7.1
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
Identification
{1 3 6 1 4 1 4526 17 26 7 1}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ipLeakStaticToRip OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This parameter controls leaking (redistribution) of static routes
to RIP. When enabled, all routes inserted to the IP routing table
via SNMP are advertised into RIP."
DEFVAL {enable}
::= { ipRouteLeaking 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.
NETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ipLeakStaticToRip
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ipLeakStaticToRip",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP.\"",
"DEFVAL",
"{",
"enable",
"}",
"::=",
"{",
"ipRouteLeaking",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP."
],
null,
null,
null,
[
"DEFVAL",
"enable"
]
]
}Vendor MIB copy from the Observium Community archive. NETGEAR support.
Module: NETGEAR-RADLAN-IpRouter
See published definition above
{'OSPF-MIB': ['ospfIfEntry', 'AreaID', 'RouterID', 'ospfVirtIfEntry'], 'RIPv2-MIB': ['rip2IfConfEntry'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'MODULE-IDENTITY', 'OBJECT-TYPE'], 'NETGEAR-RADLAN-IP': ['rip2Spec', 'ipRedundancy', 'ipRouteLeaking', 'ipRipFilter', 'rlIpRoutingProtPreference', 'rlOspf', 'ipSpec']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.26.7.2 | ipLeakStaticToOspf | 0 | 0 | |
| 1.3.6.1.4.1.4526.17.26.7.3 | ipLeakOspfToRip | 0 | 0 | |
| 1.3.6.1.4.1.4526.17.26.7.4 | ipLeakRipToOspf | 0 | 0 | |
| 1.3.6.1.4.1.4526.17.26.7.5 | ipLeakExtDirectToOspf | 0 | 0 |