Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).
Sources for this description
NETGEAR MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.4526.17.65.2.1.3
Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).
Identification
{1 3 6 1 4 1 4526 17 65 2 1 3}
| Value | Name |
|---|---|
| 0 | notApplied |
| 1 | dstAddr |
| 2 | srcAddr |
| 3 | dstAndSrcAddr |
| 4 | vlanId |
| 5 | ethType |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: dot3adAggIndex, rlDot3adAggBalanceForwardType.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.4526.17.65.2.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
rlDot3adAggBalanceUsedAddresses OBJECT-TYPE
SYNTAX INTEGER {
notApplied(0),
dstAddr(1),
srcAddr(2),
dstAndSrcAddr(3),
vlanId(4),
ethType(5)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Network Layer addresses used for Balancing of
unicast frames.
The function sets the criterion (by layer and used address in it)."
DEFVAL { dstAddr }
::= { rlDot3adAggBalanceEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).
NETGEAR MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: rlDot3adAggBalanceUsedAddresses
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rlDot3adAggBalanceUsedAddresses",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notApplied",
"(",
"0",
")",
",",
"dstAddr",
"(",
"1",
")",
",",
"srcAddr",
"(",
"2",
")",
",",
"dstAndSrcAddr",
"(",
"3",
")",
",",
"vlanId",
"(",
"4",
")",
",",
"ethType",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it).\"",
"DEFVAL",
"{",
"dstAddr",
"}",
"::=",
"{",
"rlDot3adAggBalanceEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notApplied",
0
],
[
"dstAddr",
1
],
[
"srcAddr",
2
],
[
"dstAndSrcAddr",
3
],
[
"vlanId",
4
],
[
"ethType",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specifies the Network Layer addresses used for Balancing of unicast frames. The function sets the criterion (by layer and used address in it)."
],
null,
null,
null,
[
"DEFVAL",
"dstAddr"
]
]
}Vendor MIB copy from the Observium Community archive. NETGEAR support.
Module: NETGEAR-RADLAN-TRUNK-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'PhysAddress'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'IpAddress', 'Unsigned32', 'Counter32', 'TimeTicks', 'MODULE-IDENTITY'], 'IEEE8023-LAG-MIB': ['dot3adAggIndex', 'dot3adAggPortIndex'], 'NETGEAR-RADLAN-MIB': ['rnd']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4526.17.65.2.1.1 | rlDot3adAggBalanceForwardType | 0 | 0 | |
| 1.3.6.1.4.1.4526.17.65.2.1.2 | rlDot3adAggBalanceLayer | 0 | 0 | |
| 1.3.6.1.4.1.4526.17.65.2.1.4 | rlDot3adAggBalanceBroadcastType | 0 | 0 |