Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ssPoePortPowerLimitType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"class",
"(",
"1",
")",
",",
"user",
"(",
"2",
")",
",",
"lldp-med",
"(",
"3",
")",
",",
"lldp-med-class",
"(",
"4",
")",
",",
"lldp-med-user",
"(",
"5",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"Defines the power limit type which needs to be used. Class -- option needs to be used if power is limit should be done based on detected class value. The user configured power limit value is ignored.(Default) User -- option needs to be used if power is limit should be done based on user configured power limit value. LLDP-MED -- option needs to be used if the power limit should be done based on the power in the LLDP MED packet. LLDP-MED+Class -- option needs to be used if the power limit should be done based on the power in the LLDP MED packet. If the power in the LLDP MED packet is more than the DUT deliverable power, then the power limit type switches to Class mode. LLDP-MED+User -- option needs to be used if the power limit should be done based on the power in the LLDP MED packet. If the power in the LLDP MED packet is more than the DUT deliverable power,then the power limit type switches to User configured power value.\"",
"DEFVAL",
"{",
"class",
"}",
"::=",
"{",
"ssPoePortCfgEntry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"class",
1
],
[
"user",
2
],
[
"lldp-med",
3
],
[
"lldp-med-class",
4
],
[
"lldp-med-user",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"Defines the power limit type which needs to be used. Class -- option needs to be used if power is limit should be done based on detected class value. The user configured power limit value is ignored.(Default) User -- option needs to be used if power is limit should be done based on user configured power limit value. LLDP-MED -- option needs to be used if the power limit should be done based on the power in the LLDP MED packet. LLDP-MED+Class -- option needs to be used if the power limit should be done based on the power in the LLDP MED packet. If the power in the LLDP MED packet is more than the DUT deliverable power, then the power limit type switches to Class mode. LLDP-MED+User -- option needs to be used if the power limit should be done based on the power in the LLDP MED packet. If the power in the LLDP MED packet is more than the DUT deliverable power,then the power limit type switches to User configured power value."
],
null,
null,
null,
[
"DEFVAL",
"class"
]
]
}