Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"localHostWanAddressSelectConfigSource",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"localAddress",
"(",
"0",
")",
",",
"static",
"(",
"1",
")",
",",
"pppoe",
"(",
"2",
")",
",",
"pppoa",
"(",
"3",
")",
",",
"automatic",
"(",
"9999",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates the source to be used for the provisioning of the wide area network (WAN) address. The WAN address is the IP address to be used for incoming signaling, media and management traffic. localAddress : The WAN address is the one that is set in the localHostAddress variable, whereas the localHostStaticWanAddress is ignored. static : The unit has a static WAN address. The address is configured in localHostStaticWanAddress. This setting allows a limited NAT traversal scheme. pppoe : The unit uses the PPP over Ethernet in order to obtain its WAN IP address. The PPPoE service must be enabled. See also the pppoeEnable variable. pppoa : The unit uses the PPP over ATM in order to obtain its WAN IP address. The PPPoA service must be enabled. See also the pppoaEnable variable. automatic : If the PPPoE service is enabled, the unit uses 'pppoe' as the configuration source. If the PPPoA service is enabled, the unit uses 'pppoa' as the configuration source. Otherwise the unit uses 'localAddress'. This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation shipped with your device for more details.\"",
"DEFVAL",
"{",
"automatic",
"}",
"::=",
"{",
"ipAddressConfigLocalHost",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"localAddress",
0
],
[
"static",
1
],
[
"pppoe",
2
],
[
"pppoa",
3
],
[
"automatic",
9999
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates the source to be used for the provisioning of the wide area network (WAN) address. The WAN address is the IP address to be used for incoming signaling, media and management traffic. localAddress : The WAN address is the one that is set in the localHostAddress variable, whereas the localHostStaticWanAddress is ignored. static : The unit has a static WAN address. The address is configured in localHostStaticWanAddress. This setting allows a limited NAT traversal scheme. pppoe : The unit uses the PPP over Ethernet in order to obtain its WAN IP address. The PPPoE service must be enabled. See also the pppoeEnable variable. pppoa : The unit uses the PPP over ATM in order to obtain its WAN IP address. The PPPoA service must be enabled. See also the pppoaEnable variable. automatic : If the PPPoE service is enabled, the unit uses 'pppoe' as the configuration source. If the PPPoA service is enabled, the unit uses 'pppoa' as the configuration source. Otherwise the unit uses 'localAddress'. This variable's semantics are different depending on protocol and/or hardware platforms. Please refer to the documentation shipped with your device for more details."
],
null,
null,
null,
[
"DEFVAL",
"automatic"
]
]
}