sysAdminCommand

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "sysAdminCommand",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noOp",
    "(",
    "0",
    ")",
    ",",
    "checkRam",
    "(",
    "1",
    ")",
    ",",
    "checkRom",
    "(",
    "2",
    ")",
    ",",
    "downloadSoftware",
    "(",
    "3",
    ")",
    ",",
    "resetStats",
    "(",
    "4",
    ")",
    ",",
    "setConfigSourcesStatic",
    "(",
    "5",
    ")",
    ",",
    "updateConfiguration",
    "(",
    "6",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This variable controls the various commands that can be performed by the unit. noOp : No action is taken. checkRam : Launches the RAM check routine. The unit will restart, test the RAM, and start normally afterwards. This command can only be applied while the unit is in maintenance mode (groupAdminState must be 'locked'). If the unit is shutting down (groupAdminState is 'shuttingDown'), the command is delayed until the unit enters maintenance mode. checkRom : This value's semantics are different depending on the protocol and hardware platform. Please refer to the documentation shipped with your device for more details. downloadSoftware : Launches a software update. The unit will restart, download the new software version, and restart again running the new software version. This command can only be applied while the unit is in maintenance mode (groupAdminState must be 'locked'). If the unit is shutting down (groupAdminState is 'shuttingDown'), the command is delayed until the unit enters maintenance mode. resetStats : Resets all cumulated call statistics. setConfigSourcesStatic : This command will set all configuration sources supported by the unit to 'static'. This command can be used when no DHCP server is present in the network to easily configure the unit to use static values. This value's semantics are different depending on the protocol. Please refer to the documentation shipped with your device for more details. updateConfiguration : Configuration files are fetched by the unit (see configFileFetchingFileName). The transfer protocol used is defined by configFileTransferProtocol. The unit is the initiator of the transfer sessions. The unit is automatically restarted after reception of the configuration files and the new settings are applied. This command can only be applied while the unit is in maintenance mode (groupAdminState must be 'locked'). If the unit is shutting down (groupAdminState is 'shuttingDown'), the command is delayed until the unit enters maintenance mode.\"",
    "DEFVAL",
    "{",
    "noOp",
    "}",
    "::=",
    "{",
    "sysAdminMIBObjects",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noOp",
            0
          ],
          [
            "checkRam",
            1
          ],
          [
            "checkRom",
            2
          ],
          [
            "downloadSoftware",
            3
          ],
          [
            "resetStats",
            4
          ],
          [
            "setConfigSourcesStatic",
            5
          ],
          [
            "updateConfiguration",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This variable controls the various commands that can be performed by the unit. noOp : No action is taken. checkRam : Launches the RAM check routine. The unit will restart, test the RAM, and start normally afterwards. This command can only be applied while the unit is in maintenance mode (groupAdminState must be 'locked'). If the unit is shutting down (groupAdminState is 'shuttingDown'), the command is delayed until the unit enters maintenance mode. checkRom : This value's semantics are different depending on the protocol and hardware platform. Please refer to the documentation shipped with your device for more details. downloadSoftware : Launches a software update. The unit will restart, download the new software version, and restart again running the new software version. This command can only be applied while the unit is in maintenance mode (groupAdminState must be 'locked'). If the unit is shutting down (groupAdminState is 'shuttingDown'), the command is delayed until the unit enters maintenance mode. resetStats : Resets all cumulated call statistics. setConfigSourcesStatic : This command will set all configuration sources supported by the unit to 'static'. This command can be used when no DHCP server is present in the network to easily configure the unit to use static values. This value's semantics are different depending on the protocol. Please refer to the documentation shipped with your device for more details. updateConfiguration : Configuration files are fetched by the unit (see configFileFetchingFileName). The transfer protocol used is defined by configFileTransferProtocol. The unit is the initiator of the transfer sessions. The unit is automatically restarted after reception of the configuration files and the new settings are applied. This command can only be applied while the unit is in maintenance mode (groupAdminState must be 'locked'). If the unit is shutting down (groupAdminState is 'shuttingDown'), the command is delayed until the unit enters maintenance mode."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "noOp"
    ]
  ]
}