OID reference
1.3.6.1.4.1.4998.1.1.10.1
This MIB is intended to describe all objects which are used to control and report on the state of an Arris E6 CMTS. These objects are used to perform the following functions on an Arris E6 CMTS: a) provision the cards, ports, and the CMTS itself b) run dianostic tests c) configure auditing parameters d) receive equipm…
Identification
{1 3 6 1 4 1 4998 1 1 10 1}
The displayed source records contain one distinct definition. Compare its source records.
cadEquipmentMib MODULE-IDENTITY
LAST-UPDATED "201510060000Z" -- Oct 6, 2015
ORGANIZATION
"ARRIS Group, Inc."
CONTACT-INFO
"Arris Technical Support
Phone: +1 630 281 3000
E-Mail: support@arris.com"
DESCRIPTION
"This MIB is intended to describe all objects which are used to
control and report on the state of an Arris E6 CMTS. These objects
are used to perform the following functions on an Arris E6 CMTS:
a) provision the cards, ports, and the CMTS itself
b) run dianostic tests
c) configure auditing parameters
d) receive equipment-related traps "
REVISION "201510060000Z" -- Oct 6, 2015
DESCRIPTION
"Add cerCamFaultNotification."
REVISION "201508260000Z" -- August 26, 2015
DESCRIPTION
"Add cerLicenseTypeStr to the noLicenseNotification trap."
REVISION "201508120000Z" -- August 12, 2015
DESCRIPTION
"Modify list of allowed FPGA faults."
REVISION "201507210000Z" -- July 21, 2015
DESCRIPTION
"Change upper limit of cerCardDataAllowedPorts and cerCardDataLicensePorts
from 1000 to 5000 and updated the range to all values between 0 and 5000."
REVISION "201507120000Z" -- July 12, 2015
DESCRIPTION
"Change cerCardDataRamSize units from bytes to megabytes."
REVISION "201507070000Z" -- July 7, 2015
DESCRIPTION
"Add cerSpareModeExtTable"
REVISION "201506030000Z" -- June 3, 2015
DESCRIPTION
"Change upper limit of cerCardDataAllowedPorts and cerCardDataLicensePorts
from 256 to 1000."
REVISION "201506010000Z" -- June 1, 2015
DESCRIPTION
"Remove CerCardSubType dcamOfdmAnnexB"
REVISION "201412010000Z" -- Dec 1st, 2014
DESCRIPTION
"rename dchannelVod to dchannelVideo in PortType"
REVISION "201410140000Z" -- Oct 14, 2014
DESCRIPTION
"Support 384 downstream channels per DCAM-B"
REVISION "201408010000Z" -- Aug 1, 2014
DESCRIPTION
"PortType change:
remove dchannelSdv(13) and dchannelBroadcast(14)"
REVISION "201403160000Z" -- March 16, 2014
DESCRIPTION
"Add new video channel types."
REVISION "201305160000Z" -- May 16, 2013
DESCRIPTION
"Add new SFP types."
REVISION "201304120000Z" -- April 12, 2013
DESCRIPTION
"Change units of Pem sensors to decivolts and deciamps"
REVISION "201302190000Z" -- February 8, 2013
DESCRIPTION
"Change OID of cardTempOutOfRangeNotification to equipmentTraps.19"
REVISION "201301080000Z" -- January 8, 2013
DESCRIPTION
"Remove patch control support."
REVISION "201301070000Z" -- January 7, 2013
DESCRIPTION
"Add cerCardDataPicModelName, cerCardDataPicMfgRevision, cerCardDataPicMfg, and cerCardDataPicMfgDateTime."
REVISION "201209070000Z" -- September 7, 2012
DESCRIPTION
"Modify no license notification to include additional information."
REVISION "201207100000Z" -- July 10, 2012
DESCRIPTION
"Set valid defaults for cerCardDataEntry."
REVISION "201207030000Z" -- July 3, 2012
DESCRIPTION
"Change syntax of cerCardDataMfgDateTime to DateAndTime."
REVISION "201205210000Z" -- May 21, 2012
DESCRIPTION
"Add additional patch control support."
REVISION "201205080000Z" -- May 8, 2012
DESCRIPTION
"Add initial patch support."
REVISION "201205030000Z" -- May 3, 2012
DESCRIPTION
"Add cerFanAmbientTemperature."
REVISION "201205020000Z" -- May 2, 2012
DESCRIPTION
"Remove cerPortMacIfIndex and change cerPortDocsIfIndex to ifIndex for noLicenseNotification."
REVISION "201204250000Z" -- Apr 25, 2012
DESCRIPTION
"Add noLicenseNotification."
REVISION "201204110000Z" -- Apr 11, 2012
DESCRIPTION
"Change cerCardTemperature, cerCardTemperatureHighWarn, cerCardTemperatureHighError from Celsius to value from 1 to 10"
REVISION "201203220000Z" -- Mar 22, 2012
DESCRIPTION
"Add cerCardDataAllowedPorts."
REVISION "201201050000Z" -- Jan 5, 2012
DESCRIPTION
"Add cerCardDataFeedAPresent and cerCardDataFeedBPresent."
REVISION "201109130000Z" -- Sep 13, 2011
DESCRIPTION
"Add cerPemStatusEntry"
REVISION "201108050000Z" -- Aug 5, 2011
DESCRIPTION
"Replace cerCardId with errEvCardId as the index in fpgaErrorEventEntry."
REVISION "201107190000Z" -- July 19, 2011
DESCRIPTION
"Move RSM admin ports."
REVISION "201107180000Z" -- July 18, 2011
DESCRIPTION
"Remove cardEntry, portEntry and diskVolumeEntry"
REVISION "201107080000Z" -- July 8, 2011
DESCRIPTION
"Add more support for fans."
REVISION "201106280000Z" -- June 28, 2011
DESCRIPTION
"Add support for committed software versions."
REVISION "201106140000Z" -- June 14, 2011
DESCRIPTION
"Add initial fan support."
REVISION "201103180000Z" -- March 18, 2011
DESCRIPTION
"Add trap inhibit for card overload."
REVISION "201103170000Z" -- March 17, 2011
DESCRIPTION
"Incorporate new chassis structure."
REVISION "201101270000Z" -- January 27, 2011
DESCRIPTION
"Move card version information into a separate table."
REVISION "200907100000Z" -- July 10, 2009
DESCRIPTION
"Initial changes for E6."
REVISION "200903030000Z" -- March 3, 2009
DESCRIPTION
"Change syntax of cmIpAddress from IpAddress to OCTET STRING to handle IPv4 and v6."
REVISION "200901050000Z" -- January 5, 2009
DESCRIPTION
"Add restrictions on the size of some strings in card table."
REVISION "200810140000Z" -- October 14, 2008
DESCRIPTION
"Add shelf id back into trap messages."
REVISION "200810010000Z" -- October 1, 2008
DESCRIPTION
"Add ranges for allowable card temperatures."
REVISION "200807030000Z" -- July 3, 2008
DESCRIPTION
"Remove portGroupId since cable-mac replaced this MIB object.
Add shelfNumber to portPrStateChange, portSecStateChange and portDplxStatusChange to match the variable binding list seen on trap monitor."
REVISION "200806180000Z" -- June 18, 2008
DESCRIPTION
"Additional support for disk sizes."
REVISION "200804280000Z" -- April 28, 2008
DESCRIPTION
"Initial support for MPM carrier cards."
REVISION "200804020000Z" -- April 2, 2008
DESCRIPTION
"Support various levels of temperature warnings."
REVISION "200802250000Z" -- Feb 25, 2008
DESCRIPTION
"Allowed Event Ids to range 0x00000000 to 0xFFFFFFFF for fpgaErrorEvent Table."
REVISION "200711050000Z" -- Nov 5, 2007
DESCRIPTION
"Add port flow control parameters and remove gbic support."
REVISION "200701100000Z" -- Jan 10, 2007
DESCRIPTION
"Remove cardSwBuildTime"
REVISION "200611130000Z" -- Nov 13, 2006
DESCRIPTION
"Remove portMacPortId"
REVISION "200609120000Z" -- Sep 12, 2006
DESCRIPTION
"Change syntax of portMacPortId from MacPortId to MacPortIdWithInvalid (65536 is invalid)"
REVISION "200608230000Z" -- Aug 23, 2006
DESCRIPTION
"Add portMacPortId"
REVISION "200602140000Z"
DESCRIPTION
"Add additional variable-binding cmIpAddress cmRegistrationNotification"
REVISION "200508300000Z"
DESCRIPTION
"Add support for RCM module."
REVISION "200504060000Z"
DESCRIPTION
"Add support for CM registration notification"
REVISION "200502040000Z"
DESCRIPTION
"Add downstream power loss notification."
REVISION "200501240000Z"
DESCRIPTION
"Add last card reset reason to card table."
REVISION "200412010000Z"
DESCRIPTION
"Add downstream power visibility to port table."
REVISION "200411180000Z"
DESCRIPTION
"(1) Add 2 additional variable-bindings to cmResetClearNotification.
(2) Add 1 additional variable-binding to cmResetNotification."
REVISION "200411110000Z"
DESCRIPTION
"Add preliminary support for customized FPGA error event handling."
REVISION "200409070000Z"
DESCRIPTION
"Add cardSubType, portGroupId and portDocsIfIndex to C4 Port Primary
and Secondary Trap."
REVISION "200407230000Z"
DESCRIPTION
"(1) Modify the TEXTUAL-CONVENTION of TestId.
(2) Add diagTestId for cardTestResultNotification."
REVISION "200403220000Z"
DESCRIPTION
"Added portDescription."
REVISION "200403180000Z"
DESCRIPTION
"(1) Add support for card temperature trap control.
(2) Fix smidump error by changing diskVolumeFileName object mibtree"
REVISION "200402040000Z"
DESCRIPTION
"Add CmResetClear notification."
REVISION "200312180000Z"
DESCRIPTION
"Add support for logical uchannel port type and
preliminary support for extended gbic information."
REVISION "200303310000Z"
DESCRIPTION
"Add preliminary pic support."
REVISION "200303170000Z"
DESCRIPTION
"Add card detail support."
REVISION "200303050000Z"
DESCRIPTION
"Replacing portGroupId with portCardSubType and renaming portDPortId to portGroupId."
REVISION "200303020000Z"
DESCRIPTION
"Add card temperature monitoring."
REVISION "200301290000Z"
DESCRIPTION
"Adding portDPortId and portConnectorId objects to portTable to support 2D12U CAM."
REVISION "200212140000Z"
DESCRIPTION
"Revise audit entries. Add auditAutoScheduling and auditLogOutput control.
Remove auditResultNotification"
REVISION "200211070000Z"
DESCRIPTION
"Add support for diskVolume"
REVISION "200209250000Z"
DESCRIPTION
"Undo previous change."
REVISION "200209010000Z"
DESCRIPTION
"Make cardsubtype backward compatible."
REVISION "200205010000Z"
DESCRIPTION
"Add support for cardFpgaToCpuSendRate."
REVISION "200112281630Z"
DESCRIPTION
"Add support for cardSwBuildTime."
REVISION "200112211630Z"
DESCRIPTION
"Add support for cardUpTime."
REVISION "200110030000Z"
DESCRIPTION
"Add support for card detected trap."
REVISION "200107170000Z"
DESCRIPTION
"Add support for card sparing."
::= { cadEquipment 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This MIB is intended to describe all objects which are used to control and report on the state of an Arris E6 CMTS. These objects are used to perform the following functions on an Arris E6 CMTS: a) provision the cards, ports, and the CMTS itself b) run dianostic tests c) configure auditing parameters d) receive equipment-related traps
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: unspecified.
Names: cadEquipmentMib
{
"smi_kind": "MODULE-IDENTITY",
"definition": [
"cadEquipmentMib",
"MODULE-IDENTITY",
"LAST-UPDATED",
[
"literal",
"223230313531303036303030305a22"
],
"ORGANIZATION",
"\"ARRIS Group, Inc.\"",
"CONTACT-INFO",
"\"Arris Technical Support Phone: +1 630 281 3000 E-Mail: support@arris.com\"",
"DESCRIPTION",
"\"This MIB is intended to describe all objects which are used to control and report on the state of an Arris E6 CMTS. These objects are used to perform the following functions on an Arris E6 CMTS: a) provision the cards, ports, and the CMTS itself b) run dianostic tests c) configure auditing parameters d) receive equipment-related traps \"",
"REVISION",
[
"literal",
"223230313531303036303030305a22"
],
"DESCRIPTION",
"\"Add cerCamFaultNotification.\"",
"REVISION",
[
"literal",
"223230313530383236303030305a22"
],
"DESCRIPTION",
"\"Add cerLicenseTypeStr to the noLicenseNotification trap.\"",
"REVISION",
[
"literal",
"223230313530383132303030305a22"
],
"DESCRIPTION",
"\"Modify list of allowed FPGA faults.\"",
"REVISION",
[
"literal",
"223230313530373231303030305a22"
],
"DESCRIPTION",
"\"Change upper limit of cerCardDataAllowedPorts and cerCardDataLicensePorts from 1000 to 5000 and updated the range to all values between 0 and 5000.\"",
"REVISION",
[
"literal",
"223230313530373132303030305a22"
],
"DESCRIPTION",
"\"Change cerCardDataRamSize units from bytes to megabytes.\"",
"REVISION",
[
"literal",
"223230313530373037303030305a22"
],
"DESCRIPTION",
"\"Add cerSpareModeExtTable\"",
"REVISION",
[
"literal",
"223230313530363033303030305a22"
],
"DESCRIPTION",
"\"Change upper limit of cerCardDataAllowedPorts and cerCardDataLicensePorts from 256 to 1000.\"",
"REVISION",
[
"literal",
"223230313530363031303030305a22"
],
"DESCRIPTION",
"\"Remove CerCardSubType dcamOfdmAnnexB\"",
"REVISION",
[
"literal",
"223230313431323031303030305a22"
],
"DESCRIPTION",
"\"rename dchannelVod to dchannelVideo in PortType\"",
"REVISION",
[
"literal",
"223230313431303134303030305a22"
],
"DESCRIPTION",
"\"Support 384 downstream channels per DCAM-B\"",
"REVISION",
[
"literal",
"223230313430383031303030305a22"
],
"DESCRIPTION",
"\"PortType change: remove dchannelSdv(13) and dchannelBroadcast(14)\"",
"REVISION",
[
"literal",
"223230313430333136303030305a22"
],
"DESCRIPTION",
"\"Add new video channel types.\"",
"REVISION",
[
"literal",
"223230313330353136303030305a22"
],
"DESCRIPTION",
"\"Add new SFP types.\"",
"REVISION",
[
"literal",
"223230313330343132303030305a22"
],
"DESCRIPTION",
"\"Change units of Pem sensors to decivolts and deciamps\"",
"REVISION",
[
"literal",
"223230313330323139303030305a22"
],
"DESCRIPTION",
"\"Change OID of cardTempOutOfRangeNotification to equipmentTraps.19\"",
"REVISION",
[
"literal",
"223230313330313038303030305a22"
],
"DESCRIPTION",
"\"Remove patch control support.\"",
"REVISION",
[
"literal",
"223230313330313037303030305a22"
],
"DESCRIPTION",
"\"Add cerCardDataPicModelName, cerCardDataPicMfgRevision, cerCardDataPicMfg, and cerCardDataPicMfgDateTime.\"",
"REVISION",
[
"literal",
"223230313230393037303030305a22"
],
"DESCRIPTION",
"\"Modify no license notification to include additional information.\"",
"REVISION",
[
"literal",
"223230313230373130303030305a22"
],
"DESCRIPTION",
"\"Set valid defaults for cerCardDataEntry.\"",
"REVISION",
[
"literal",
"223230313230373033303030305a22"
],
"DESCRIPTION",
"\"Change syntax of cerCardDataMfgDateTime to DateAndTime.\"",
"REVISION",
[
"literal",
"223230313230353231303030305a22"
],
"DESCRIPTION",
"\"Add additional patch control support.\"",
"REVISION",
[
"literal",
"223230313230353038303030305a22"
],
"DESCRIPTION",
"\"Add initial patch support.\"",
"REVISION",
[
"literal",
"223230313230353033303030305a22"
],
"DESCRIPTION",
"\"Add cerFanAmbientTemperature.\"",
"REVISION",
[
"literal",
"223230313230353032303030305a22"
],
"DESCRIPTION",
"\"Remove cerPortMacIfIndex and change cerPortDocsIfIndex to ifIndex for noLicenseNotification.\"",
"REVISION",
[
"literal",
"223230313230343235303030305a22"
],
"DESCRIPTION",
"\"Add noLicenseNotification.\"",
"REVISION",
[
"literal",
"223230313230343131303030305a22"
],
"DESCRIPTION",
"\"Change cerCardTemperature, cerCardTemperatureHighWarn, cerCardTemperatureHighError from Celsius to value from 1 to 10\"",
"REVISION",
[
"literal",
"223230313230333232303030305a22"
],
"DESCRIPTION",
"\"Add cerCardDataAllowedPorts.\"",
"REVISION",
[
"literal",
"223230313230313035303030305a22"
],
"DESCRIPTION",
"\"Add cerCardDataFeedAPresent and cerCardDataFeedBPresent.\"",
"REVISION",
[
"literal",
"223230313130393133303030305a22"
],
"DESCRIPTION",
"\"Add cerPemStatusEntry\"",
"REVISION",
[
"literal",
"223230313130383035303030305a22"
],
"DESCRIPTION",
"\"Replace cerCardId with errEvCardId as the index in fpgaErrorEventEntry.\"",
"REVISION",
[
"literal",
"223230313130373139303030305a22"
],
"DESCRIPTION",
"\"Move RSM admin ports.\"",
"REVISION",
[
"literal",
"223230313130373138303030305a22"
],
"DESCRIPTION",
"\"Remove cardEntry, portEntry and diskVolumeEntry\"",
"REVISION",
[
"literal",
"223230313130373038303030305a22"
],
"DESCRIPTION",
"\"Add more support for fans.\"",
"REVISION",
[
"literal",
"223230313130363238303030305a22"
],
"DESCRIPTION",
"\"Add support for committed software versions.\"",
"REVISION",
[
"literal",
"223230313130363134303030305a22"
],
"DESCRIPTION",
"\"Add initial fan support.\"",
"REVISION",
[
"literal",
"223230313130333138303030305a22"
],
"DESCRIPTION",
"\"Add trap inhibit for card overload.\"",
"REVISION",
[
"literal",
"223230313130333137303030305a22"
],
"DESCRIPTION",
"\"Incorporate new chassis structure.\"",
"REVISION",
[
"literal",
"223230313130313237303030305a22"
],
"DESCRIPTION",
"\"Move card version information into a separate table.\"",
"REVISION",
[
"literal",
"223230303930373130303030305a22"
],
"DESCRIPTION",
"\"Initial changes for E6.\"",
"REVISION",
[
"literal",
"223230303930333033303030305a22"
],
"DESCRIPTION",
"\"Change syntax of cmIpAddress from IpAddress to OCTET STRING to handle IPv4 and v6.\"",
"REVISION",
[
"literal",
"223230303930313035303030305a22"
],
"DESCRIPTION",
"\"Add restrictions on the size of some strings in card table.\"",
"REVISION",
[
"literal",
"223230303831303134303030305a22"
],
"DESCRIPTION",
"\"Add shelf id back into trap messages.\"",
"REVISION",
[
"literal",
"223230303831303031303030305a22"
],
"DESCRIPTION",
"\"Add ranges for allowable card temperatures.\"",
"REVISION",
[
"literal",
"223230303830373033303030305a22"
],
"DESCRIPTION",
"\"Remove portGroupId since cable-mac replaced this MIB object. Add shelfNumber to portPrStateChange, portSecStateChange and portDplxStatusChange to match the variable binding list seen on trap monitor.\"",
"REVISION",
[
"literal",
"223230303830363138303030305a22"
],
"DESCRIPTION",
"\"Additional support for disk sizes.\"",
"REVISION",
[
"literal",
"223230303830343238303030305a22"
],
"DESCRIPTION",
"\"Initial support for MPM carrier cards.\"",
"REVISION",
[
"literal",
"223230303830343032303030305a22"
],
"DESCRIPTION",
"\"Support various levels of temperature warnings.\"",
"REVISION",
[
"literal",
"223230303830323235303030305a22"
],
"DESCRIPTION",
"\"Allowed Event Ids to range 0x00000000 to 0xFFFFFFFF for fpgaErrorEvent Table.\"",
"REVISION",
[
"literal",
"223230303731313035303030305a22"
],
"DESCRIPTION",
"\"Add port flow control parameters and remove gbic support.\"",
"REVISION",
[
"literal",
"223230303730313130303030305a22"
],
"DESCRIPTION",
"\"Remove cardSwBuildTime\"",
"REVISION",
[
"literal",
"223230303631313133303030305a22"
],
"DESCRIPTION",
"\"Remove portMacPortId\"",
"REVISION",
[
"literal",
"223230303630393132303030305a22"
],
"DESCRIPTION",
"\"Change syntax of portMacPortId from MacPortId to MacPortIdWithInvalid (65536 is invalid)\"",
"REVISION",
[
"literal",
"223230303630383233303030305a22"
],
"DESCRIPTION",
"\"Add portMacPortId\"",
"REVISION",
[
"literal",
"223230303630323134303030305a22"
],
"DESCRIPTION",
"\"Add additional variable-binding cmIpAddress cmRegistrationNotification\"",
"REVISION",
[
"literal",
"223230303530383330303030305a22"
],
"DESCRIPTION",
"\"Add support for RCM module.\"",
"REVISION",
[
"literal",
"223230303530343036303030305a22"
],
"DESCRIPTION",
"\"Add support for CM registration notification\"",
"REVISION",
[
"literal",
"223230303530323034303030305a22"
],
"DESCRIPTION",
"\"Add downstream power loss notification.\"",
"REVISION",
[
"literal",
"223230303530313234303030305a22"
],
"DESCRIPTION",
"\"Add last card reset reason to card table.\"",
"REVISION",
[
"literal",
"223230303431323031303030305a22"
],
"DESCRIPTION",
"\"Add downstream power visibility to port table.\"",
"REVISION",
[
"literal",
"223230303431313138303030305a22"
],
"DESCRIPTION",
"\"(1) Add 2 additional variable-bindings to cmResetClearNotification. (2) Add 1 additional variable-binding to cmResetNotification.\"",
"REVISION",
[
"literal",
"223230303431313131303030305a22"
],
"DESCRIPTION",
"\"Add preliminary support for customized FPGA error event handling.\"",
"REVISION",
[
"literal",
"223230303430393037303030305a22"
],
"DESCRIPTION",
"\"Add cardSubType, portGroupId and portDocsIfIndex to C4 Port Primary and Secondary Trap.\"",
"REVISION",
[
"literal",
"223230303430373233303030305a22"
],
"DESCRIPTION",
"\"(1) Modify the TEXTUAL-CONVENTION of TestId. (2) Add diagTestId for cardTestResultNotification.\"",
"REVISION",
[
"literal",
"223230303430333232303030305a22"
],
"DESCRIPTION",
"\"Added portDescription.\"",
"REVISION",
[
"literal",
"223230303430333138303030305a22"
],
"DESCRIPTION",
"\"(1) Add support for card temperature trap control. (2) Fix smidump error by changing diskVolumeFileName object mibtree\"",
"REVISION",
[
"literal",
"223230303430323034303030305a22"
],
"DESCRIPTION",
"\"Add CmResetClear notification.\"",
"REVISION",
[
"literal",
"223230303331323138303030305a22"
],
"DESCRIPTION",
"\"Add support for logical uchannel port type and preliminary support for extended gbic information.\"",
"REVISION",
[
"literal",
"223230303330333331303030305a22"
],
"DESCRIPTION",
"\"Add preliminary pic support.\"",
"REVISION",
[
"literal",
"223230303330333137303030305a22"
],
"DESCRIPTION",
"\"Add card detail support.\"",
"REVISION",
[
"literal",
"223230303330333035303030305a22"
],
"DESCRIPTION",
"\"Replacing portGroupId with portCardSubType and renaming portDPortId to portGroupId.\"",
"REVISION",
[
"literal",
"223230303330333032303030305a22"
],
"DESCRIPTION",
"\"Add card temperature monitoring.\"",
"REVISION",
[
"literal",
"223230303330313239303030305a22"
],
"DESCRIPTION",
"\"Adding portDPortId and portConnectorId objects to portTable to support 2D12U CAM.\"",
"REVISION",
[
"literal",
"223230303231323134303030305a22"
],
"DESCRIPTION",
"\"Revise audit entries. Add auditAutoScheduling and auditLogOutput control. Remove auditResultNotification\"",
"REVISION",
[
"literal",
"223230303231313037303030305a22"
],
"DESCRIPTION",
"\"Add support for diskVolume\"",
"REVISION",
[
"literal",
"223230303230393235303030305a22"
],
"DESCRIPTION",
"\"Undo previous change.\"",
"REVISION",
[
"literal",
"223230303230393031303030305a22"
],
"DESCRIPTION",
"\"Make cardsubtype backward compatible.\"",
"REVISION",
[
"literal",
"223230303230353031303030305a22"
],
"DESCRIPTION",
"\"Add support for cardFpgaToCpuSendRate.\"",
"REVISION",
[
"literal",
"223230303131323238313633305a22"
],
"DESCRIPTION",
"\"Add support for cardSwBuildTime.\"",
"REVISION",
[
"literal",
"223230303131323231313633305a22"
],
"DESCRIPTION",
"\"Add support for cardUpTime.\"",
"REVISION",
[
"literal",
"223230303131303033303030305a22"
],
"DESCRIPTION",
"\"Add support for card detected trap.\"",
"REVISION",
[
"literal",
"223230303130373137303030305a22"
],
"DESCRIPTION",
"\"Add support for card sparing.\"",
"::=",
"{",
"cadEquipment",
"1",
"}"
],
"syntax_tree": [
[
"LAST-UPDATED",
"201510060000Z"
],
[
"ORGANIZATION",
"ARRIS Group, Inc."
],
[
"CONTACT-INFO",
"Arris Technical Support Phone: +1 630 281 3000 E-Mail: support@arris.com"
],
[
"DESCRIPTION",
"This MIB is intended to describe all objects which are used to control and report on the state of an Arris E6 CMTS. These objects are used to perform the following functions on an Arris E6 CMTS: a) provision the cards, ports, and the CMTS itself b) run dianostic tests c) configure auditing parameters d) receive equipment-related traps"
],
[
"Revisions",
[
[
"201510060000Z",
[
"DESCRIPTION",
"Add cerCamFaultNotification."
]
],
[
"201508260000Z",
[
"DESCRIPTION",
"Add cerLicenseTypeStr to the noLicenseNotification trap."
]
],
[
"201508120000Z",
[
"DESCRIPTION",
"Modify list of allowed FPGA faults."
]
],
[
"201507210000Z",
[
"DESCRIPTION",
"Change upper limit of cerCardDataAllowedPorts and cerCardDataLicensePorts from 1000 to 5000 and updated the range to all values between 0 and 5000."
]
],
[
"201507120000Z",
[
"DESCRIPTION",
"Change cerCardDataRamSize units from bytes to megabytes."
]
],
[
"201507070000Z",
[
"DESCRIPTION",
"Add cerSpareModeExtTable"
]
],
[
"201506030000Z",
[
"DESCRIPTION",
"Change upper limit of cerCardDataAllowedPorts and cerCardDataLicensePorts from 256 to 1000."
]
],
[
"201506010000Z",
[
"DESCRIPTION",
"Remove CerCardSubType dcamOfdmAnnexB"
]
],
[
"201412010000Z",
[
"DESCRIPTION",
"rename dchannelVod to dchannelVideo in PortType"
]
],
[
"201410140000Z",
[
"DESCRIPTION",
"Support 384 downstream channels per DCAM-B"
]
],
[
"201408010000Z",
[
"DESCRIPTION",
"PortType change: remove dchannelSdv(13) and dchannelBroadcast(14)"
]
],
[
"201403160000Z",
[
"DESCRIPTION",
"Add new video channel types."
]
],
[
"201305160000Z",
[
"DESCRIPTION",
"Add new SFP types."
]
],
[
"201304120000Z",
[
"DESCRIPTION",
"Change units of Pem sensors to decivolts and deciamps"
]
],
[
"201302190000Z",
[
"DESCRIPTION",
"Change OID of cardTempOutOfRangeNotification to equipmentTraps.19"
]
],
[
"201301080000Z",
[
"DESCRIPTION",
"Remove patch control support."
]
],
[
"201301070000Z",
[
"DESCRIPTION",
"Add cerCardDataPicModelName, cerCardDataPicMfgRevision, cerCardDataPicMfg, and cerCardDataPicMfgDateTime."
]
],
[
"201209070000Z",
[
"DESCRIPTION",
"Modify no license notification to include additional information."
]
],
[
"201207100000Z",
[
"DESCRIPTION",
"Set valid defaults for cerCardDataEntry."
]
],
[
"201207030000Z",
[
"DESCRIPTION",
"Change syntax of cerCardDataMfgDateTime to DateAndTime."
]
],
[
"201205210000Z",
[
"DESCRIPTION",
"Add additional patch control support."
]
],
[
"201205080000Z",
[
"DESCRIPTION",
"Add initial patch support."
]
],
[
"201205030000Z",
[
"DESCRIPTION",
"Add cerFanAmbientTemperature."
]
],
[
"201205020000Z",
[
"DESCRIPTION",
"Remove cerPortMacIfIndex and change cerPortDocsIfIndex to ifIndex for noLicenseNotification."
]
],
[
"201204250000Z",
[
"DESCRIPTION",
"Add noLicenseNotification."
]
],
[
"201204110000Z",
[
"DESCRIPTION",
"Change cerCardTemperature, cerCardTemperatureHighWarn, cerCardTemperatureHighError from Celsius to value from 1 to 10"
]
],
[
"201203220000Z",
[
"DESCRIPTION",
"Add cerCardDataAllowedPorts."
]
],
[
"201201050000Z",
[
"DESCRIPTION",
"Add cerCardDataFeedAPresent and cerCardDataFeedBPresent."
]
],
[
"201109130000Z",
[
"DESCRIPTION",
"Add cerPemStatusEntry"
]
],
[
"201108050000Z",
[
"DESCRIPTION",
"Replace cerCardId with errEvCardId as the index in fpgaErrorEventEntry."
]
],
[
"201107190000Z",
[
"DESCRIPTION",
"Move RSM admin ports."
]
],
[
"201107180000Z",
[
"DESCRIPTION",
"Remove cardEntry, portEntry and diskVolumeEntry"
]
],
[
"201107080000Z",
[
"DESCRIPTION",
"Add more support for fans."
]
],
[
"201106280000Z",
[
"DESCRIPTION",
"Add support for committed software versions."
]
],
[
"201106140000Z",
[
"DESCRIPTION",
"Add initial fan support."
]
],
[
"201103180000Z",
[
"DESCRIPTION",
"Add trap inhibit for card overload."
]
],
[
"201103170000Z",
[
"DESCRIPTION",
"Incorporate new chassis structure."
]
],
[
"201101270000Z",
[
"DESCRIPTION",
"Move card version information into a separate table."
]
],
[
"200907100000Z",
[
"DESCRIPTION",
"Initial changes for E6."
]
],
[
"200903030000Z",
[
"DESCRIPTION",
"Change syntax of cmIpAddress from IpAddress to OCTET STRING to handle IPv4 and v6."
]
],
[
"200901050000Z",
[
"DESCRIPTION",
"Add restrictions on the size of some strings in card table."
]
],
[
"200810140000Z",
[
"DESCRIPTION",
"Add shelf id back into trap messages."
]
],
[
"200810010000Z",
[
"DESCRIPTION",
"Add ranges for allowable card temperatures."
]
],
[
"200807030000Z",
[
"DESCRIPTION",
"Remove portGroupId since cable-mac replaced this MIB object. Add shelfNumber to portPrStateChange, portSecStateChange and portDplxStatusChange to match the variable binding list seen on trap monitor."
]
],
[
"200806180000Z",
[
"DESCRIPTION",
"Additional support for disk sizes."
]
],
[
"200804280000Z",
[
"DESCRIPTION",
"Initial support for MPM carrier cards."
]
],
[
"200804020000Z",
[
"DESCRIPTION",
"Support various levels of temperature warnings."
]
],
[
"200802250000Z",
[
"DESCRIPTION",
"Allowed Event Ids to range 0x00000000 to 0xFFFFFFFF for fpgaErrorEvent Table."
]
],
[
"200711050000Z",
[
"DESCRIPTION",
"Add port flow control parameters and remove gbic support."
]
],
[
"200701100000Z",
[
"DESCRIPTION",
"Remove cardSwBuildTime"
]
],
[
"200611130000Z",
[
"DESCRIPTION",
"Remove portMacPortId"
]
],
[
"200609120000Z",
[
"DESCRIPTION",
"Change syntax of portMacPortId from MacPortId to MacPortIdWithInvalid (65536 is invalid)"
]
],
[
"200608230000Z",
[
"DESCRIPTION",
"Add portMacPortId"
]
],
[
"200602140000Z",
[
"DESCRIPTION",
"Add additional variable-binding cmIpAddress cmRegistrationNotification"
]
],
[
"200508300000Z",
[
"DESCRIPTION",
"Add support for RCM module."
]
],
[
"200504060000Z",
[
"DESCRIPTION",
"Add support for CM registration notification"
]
],
[
"200502040000Z",
[
"DESCRIPTION",
"Add downstream power loss notification."
]
],
[
"200501240000Z",
[
"DESCRIPTION",
"Add last card reset reason to card table."
]
],
[
"200412010000Z",
[
"DESCRIPTION",
"Add downstream power visibility to port table."
]
],
[
"200411180000Z",
[
"DESCRIPTION",
"(1) Add 2 additional variable-bindings to cmResetClearNotification. (2) Add 1 additional variable-binding to cmResetNotification."
]
],
[
"200411110000Z",
[
"DESCRIPTION",
"Add preliminary support for customized FPGA error event handling."
]
],
[
"200409070000Z",
[
"DESCRIPTION",
"Add cardSubType, portGroupId and portDocsIfIndex to C4 Port Primary and Secondary Trap."
]
],
[
"200407230000Z",
[
"DESCRIPTION",
"(1) Modify the TEXTUAL-CONVENTION of TestId. (2) Add diagTestId for cardTestResultNotification."
]
],
[
"200403220000Z",
[
"DESCRIPTION",
"Added portDescription."
]
],
[
"200403180000Z",
[
"DESCRIPTION",
"(1) Add support for card temperature trap control. (2) Fix smidump error by changing diskVolumeFileName object mibtree"
]
],
[
"200402040000Z",
[
"DESCRIPTION",
"Add CmResetClear notification."
]
],
[
"200312180000Z",
[
"DESCRIPTION",
"Add support for logical uchannel port type and preliminary support for extended gbic information."
]
],
[
"200303310000Z",
[
"DESCRIPTION",
"Add preliminary pic support."
]
],
[
"200303170000Z",
[
"DESCRIPTION",
"Add card detail support."
]
],
[
"200303050000Z",
[
"DESCRIPTION",
"Replacing portGroupId with portCardSubType and renaming portDPortId to portGroupId."
]
],
[
"200303020000Z",
[
"DESCRIPTION",
"Add card temperature monitoring."
]
],
[
"200301290000Z",
[
"DESCRIPTION",
"Adding portDPortId and portConnectorId objects to portTable to support 2D12U CAM."
]
],
[
"200212140000Z",
[
"DESCRIPTION",
"Revise audit entries. Add auditAutoScheduling and auditLogOutput control. Remove auditResultNotification"
]
],
[
"200211070000Z",
[
"DESCRIPTION",
"Add support for diskVolume"
]
],
[
"200209250000Z",
[
"DESCRIPTION",
"Undo previous change."
]
],
[
"200209010000Z",
[
"DESCRIPTION",
"Make cardsubtype backward compatible."
]
],
[
"200205010000Z",
[
"DESCRIPTION",
"Add support for cardFpgaToCpuSendRate."
]
],
[
"200112281630Z",
[
"DESCRIPTION",
"Add support for cardSwBuildTime."
]
],
[
"200112211630Z",
[
"DESCRIPTION",
"Add support for cardUpTime."
]
],
[
"200110030000Z",
[
"DESCRIPTION",
"Add support for card detected trap."
]
],
[
"200107170000Z",
[
"DESCRIPTION",
"Add support for card sparing."
]
]
]
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: CADANT-CMTS-EQUIPMENT-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero', 'ifIndex'], 'CADANT-TC': ['AdminState', 'CardId', 'CerCardSubType', 'CerCardType', 'DiskVolumeUsageLevel', 'DuplexStatus', 'EqActionType', 'FirmwareSource', 'FlowControlMode', 'PicType', 'CerPicType', 'PortId', 'PortMode', 'PortDetectedMode', 'PortType', 'CerPortType', 'PrimaryState', 'SecondaryState'], 'SNMPv2-TC': ['DateAndTime', 'DisplayString', 'MacAddress', 'RowStatus', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['Counter32', 'Integer32', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-TYPE', 'TimeTicks', 'IpAddress', 'Unsigned32'], 'DOCS-IF-MIB': ['TenthdBmV'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'CADANT-PRODUCTS-MIB': ['cadEquipment']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.10.1.0 | equipmentTraps | 20 | 24 | |
| 1.3.6.1.4.1.4998.1.1.10.1.1 | systemGeneral | 12 | 12 | |
| 1.3.6.1.4.1.4998.1.1.10.1.2 | shelfObjects | 2 | 2 | |
| 1.3.6.1.4.1.4998.1.1.10.1.3 | equipmentState | 2 | 2 | |
| 1.3.6.1.4.1.4998.1.1.10.1.4 | equipmentTbl | 7 | 130 | |
| 1.3.6.1.4.1.4998.1.1.10.1.5 | equipmentDiag | 3 | 19 | |
| 1.3.6.1.4.1.4998.1.1.10.1.6 | equipmentAudit | 4 | 18 | |
| 1.3.6.1.4.1.4998.1.1.10.1.8 | cmDevice | 9 | 9 | |
| 1.3.6.1.4.1.4998.1.1.10.1.9 | equipmentError | 1 | 8 | |
| 1.3.6.1.4.1.4998.1.1.10.1.10 | cadEquipmentMibConformance | 2 | 13 | |
| 1.3.6.1.4.1.4998.1.1.10.1.11 | cerSpareModeExt | 1 | 6 | |
| 1.3.6.1.4.1.4998.1.1.10.1.12 | licenseError | 1 | 1 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.10.2 | cadHardwareMeasMib | 13 | 184 |