Status in source: current.
Names: cadIf3CmtsCmRegStatusEnergyMgtEnabled
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cadIf3CmtsCmRegStatusEnergyMgtEnabled",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"em1x1Mode",
"(",
"0",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This attribute indicates which, if any, of the Energy Management Features are enabled for this CM. If this attribute returns em1x1Mode(0) bit set, the CM is configured with the Energy Management 1x1 Feature enabled. If this attribute returns all bits cleared, the CM will not request to operate in any Energy Management mode of operation. Note: This attribute only indicates if an Energy Management Feature is enabled/disabled via the CM config file and registration request/response exchange and does not indicate whether the CM is actively operating in an Energy Management Mode.\"",
"REFERENCE",
"\"DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I20-121113, Energy Management Features section.\"",
"DEFVAL",
"{",
"{",
"}",
"}",
"::=",
"{",
"cadIfCmtsCmStatusEntry",
"53",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"em1x1Mode",
0
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This attribute indicates which, if any, of the Energy Management Features are enabled for this CM. If this attribute returns em1x1Mode(0) bit set, the CM is configured with the Energy Management 1x1 Feature enabled. If this attribute returns all bits cleared, the CM will not request to operate in any Energy Management mode of operation. Note: This attribute only indicates if an Energy Management Feature is enabled/disabled via the CM config file and registration request/response exchange and does not indicate whether the CM is actively operating in an Energy Management Mode."
],
[
"REFERENCE",
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface Specification CM-SP-MULPIv3.0-I20-121113, Energy Management Features section."
],
null,
null,
[
"DEFVAL",
[]
]
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: CADANT-CMTS-MAC-MIB
See published definition above
Module imports
{'IF-MIB': ['ifIndex', 'InterfaceIndexOrZero', 'InterfaceIndex'], 'IP-MIB': ['ipNetToMediaEntry'], 'CADANT-TC': ['OUIAddress', 'InetAddressIPv4or6', 'CadCpeDeviceTypes'], 'SNMPv2-TC': ['DisplayString', 'MacAddress', 'RowStatus', 'TEXTUAL-CONVENTION', 'TimeStamp', 'TruthValue', 'DateAndTime'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress'], 'DOCS-IF-MIB': ['TenthdBmV', 'TenthdB', 'DocsisUpstreamType', 'DocsisVersion', 'DocsisQosVersion'], 'DOCS-IF3-MIB': ['RcpId', 'ChSetId', 'IfDirection'], 'DOCS-QOS3-MIB': ['docsQosServiceClassEntry', 'BitRate', 'docsQosServiceFlowId', 'docsQosServiceFlowSidClusterId'], 'INET-ADDRESS-MIB': ['InetAddressIPv6', 'InetAddressIPv4', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'CADANT-PRODUCTS-MIB': ['cadLayer2'], 'CADANT-CMTS-LAYER2CMTS-MIB': ['cadIfMacDomainIfIndex', 'cadMacChlChannelIfIndex'], 'CADANT-CMTS-DOWNCHANNEL-MIB': ['CerOfdmModBitsType', 'OfdmProfileId']}
Related source files and packages: