OID reference
1.3.6.1.4.1.4998.1.1.55.1.1.2
An interval between two polling cycles of the CMTS CM Poller. The poller will not start the next cycle until it finished polling for the last CM , even though the time has expired. If the cadCmRemoteQueryPollerInterval is too small with a large number of CMs, the poller would tie up the CPU and resources and possibly …
Identification
{1 3 6 1 4 1 4998 1 1 55 1 1 2}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.4998.1.1.55.1.1.2.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
cadCmRemoteQueryPollerInterval OBJECT-TYPE
SYNTAX Unsigned32(30..86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An interval between two polling cycles of the CMTS CM
Poller.
The poller will not start the next cycle until it
finished polling for the last CM , even though the
time has expired. If the cadCmRemoteQueryPollerInterval is
too small with a large number of CMs, the poller would
tie up the CPU and resources and possibly degrade the
system's performance."
DEFVAL { 1800 }
::= { cadCmRemoteQueryPoller 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
An interval between two polling cycles of the CMTS CM Poller. The poller will not start the next cycle until it finished polling for the last CM , even though the time has expired. If the cadCmRemoteQueryPollerInterval is too small with a large number of CMs, the poller would tie up the CPU and resources and possibly degrade the system's performance.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: cadCmRemoteQueryPollerInterval
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cadCmRemoteQueryPollerInterval",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"30",
".",
".",
"86400",
")",
"UNITS",
[
"literal",
"227365636f6e647322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"An interval between two polling cycles of the CMTS CM Poller. The poller will not start the next cycle until it finished polling for the last CM , even though the time has expired. If the cadCmRemoteQueryPollerInterval is too small with a large number of CMs, the poller would tie up the CPU and resources and possibly degrade the system's performance.\"",
"DEFVAL",
"{",
"1800",
"}",
"::=",
"{",
"cadCmRemoteQueryPoller",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
30,
86400
]
]
]
],
[
"UNITS",
"seconds"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"An interval between two polling cycles of the CMTS CM Poller. The poller will not start the next cycle until it finished polling for the last CM , even though the time has expired. If the cadCmRemoteQueryPollerInterval is too small with a large number of CMs, the poller would tie up the CPU and resources and possibly degrade the system's performance."
],
null,
null,
null,
[
"DEFVAL",
1800
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CADANT-REMOTE-QUERY-MIB
See published definition above
{'SNMPv2-TC': ['TruthValue', 'TimeStamp', 'DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'IpAddress', 'Unsigned32'], 'DOCS-IF-MIB': ['TenthdBmV', 'TenthdB'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'CADANT-CMTS-MAC-MIB': ['cadIfCmtsCmStatusEntry'], 'CADANT-PRODUCTS-MIB': ['cadCmRemoteQuery']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4998.1.1.55.1.1.1 | cadCmRemoteQueryPollerEnable | 0 | 0 | |
| 1.3.6.1.4.1.4998.1.1.55.1.1.3 | cadCmRemoteQueryPollerStartTime | 0 | 0 | |
| 1.3.6.1.4.1.4998.1.1.55.1.1.4 | cadCmRemoteQueryPollerStopTime | 0 | 0 | |
| 1.3.6.1.4.1.4998.1.1.55.1.1.5 | cadCmRemoteQueryPollerCommunity | 0 | 0 | |
| 1.3.6.1.4.1.4998.1.1.55.1.1.6 | cadCmRemoteQueryMacAddress | 0 | 0 | |
| 1.3.6.1.4.1.4998.1.1.55.1.1.7 | cadCmRemoteQuerySourceIpAddrType | 0 | 0 | |
| 1.3.6.1.4.1.4998.1.1.55.1.1.8 | cadCmRemoteQuerySourceIpAddr | 0 | 0 |