OID reference
1.3.6.1.4.1.5205.2.35.1.25.1
Set DHCP Relay State. 0 : Disable, 1 : Enable. When DHCP or DHCP Snooping is already running. Please disable DHCP or DHCP Snooping first, and then enable DHCP Relay again.
Identification
{1 3 6 1 4 1 5205 2 35 1 25 1}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.5205.2.35.1.25.1.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
es2410cDhcpRelayState OBJECT-TYPE
SYNTAX INTEGER(0|1)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set DHCP Relay State.
0 : Disable,
1 : Enable.
When DHCP or DHCP Snooping is already running. Please disable DHCP or DHCP Snooping first, and then enable DHCP Relay again.
"
::= { es2410cDhcprelay 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Set DHCP Relay State. 0 : Disable, 1 : Enable. When DHCP or DHCP Snooping is already running. Please disable DHCP or DHCP Snooping first, and then enable DHCP Relay again.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: es2410cDhcpRelayState
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"es2410cDhcpRelayState",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"0",
"|",
"1",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Set DHCP Relay State. 0 : Disable, 1 : Enable. When DHCP or DHCP Snooping is already running. Please disable DHCP or DHCP Snooping first, and then enable DHCP Relay again. \"",
"::=",
"{",
"es2410cDhcprelay",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
0
],
[
1
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Set DHCP Relay State. 0 : Disable, 1 : Enable. When DHCP or DHCP Snooping is already running. Please disable DHCP or DHCP Snooping first, and then enable DHCP Relay again."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: RUBYTECH-ES2410C-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'MacAddress'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'IpAddress'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5205.2.35.1.25.2 | es2410cDhcpRelayLifeTime | 0 | 0 | |
| 1.3.6.1.4.1.5205.2.35.1.25.3 | es2410cDhcpRelayOption82 | 0 | 0 | |
| 1.3.6.1.4.1.5205.2.35.1.25.4 | es2410cDhcpRelayOption82Action | 0 | 0 | |
| 1.3.6.1.4.1.5205.2.35.1.25.5 | es2410cDhcpRelayServerPort | 0 | 0 | |
| 1.3.6.1.4.1.5205.2.35.1.25.6 | es2410cDhcpRelayServerIP | 0 | 0 |