{1 3 6 1 4 1 52642 1 1 10 2 10 1 1 1 32}
The current operational state of the interface. If fsApIfAdminStatus is admindown(2) then fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is changed to up(0) then fsApIfOperStatus should change to up(0) . it should remain in the down(1) state if and only if there is a fault that prevents it from going to the up(0) state;
Status in source: current.
Names: fsifOperStatusw
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsifOperStatusw",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"up",
"(",
"0",
")",
",",
"down",
"(",
"1",
")",
",",
"admindown",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The current operational state of the interface. If fsApIfAdminStatus is admindown(2) then fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is changed to up(0) then fsApIfOperStatus should change to up(0) . it should remain in the down(1) state if and only if there is a fault that prevents it from going to the up(0) state; \"",
"::=",
"{",
"fsIfEntry",
"32",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"up",
0
],
[
"down",
1
],
[
"admindown",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The current operational state of the interface. If fsApIfAdminStatus is admindown(2) then fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is changed to up(0) then fsApIfOperStatus should change to up(0) . it should remain in the down(1) state if and only if there is a fault that prevents it from going to the up(0) state;"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-INTERFACE-MIB
fsifOperStatusw OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is
changed to up(0) then fsApIfOperStatus should change to
up(0) . it should remain in the down(1) state if
and only if there is a fault that prevents it from
going to the up(0) state; "
::= { fsIfEntry 32 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.845940+00:00.
Module: FS-INTERFACE-MIB
fsifOperStatusw OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is
changed to up(0) then fsApIfOperStatus should change to
up(0) . it should remain in the down(1) state if
and only if there is a fault that prevents it from
going to the up(0) state; "
::= { fsIfEntry 32 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex', 'ifDescr', 'ifAdminStatus', 'ifOperStatus'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.059057+00:00.
Module: FS-INTERFACE-MIB
fsifOperStatusw OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is
changed to up(0) then fsApIfOperStatus should change to
up(0) . it should remain in the down(1) state if
and only if there is a fault that prevents it from
going to the up(0) state; "
::= { fsIfEntry 32 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.496038+00:00.
Module: FS-INTERFACE-MIB
fsifOperStatusw OBJECT-TYPE
SYNTAX INTEGER {
up(0),
down(1),
admindown(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the interface.
If fsApIfAdminStatus is admindown(2) then
fsApIfOperStatus should be admindown(2). If fsApIfAdminStatus is
changed to up(0) then fsApIfOperStatus should change to
up(0) . it should remain in the down(1) state if
and only if there is a fault that prevents it from
going to the up(0) state; "
::= { fsIfEntry 32 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.247003+00:00.