{1 3 6 1 4 1 52642 1 1 10 2 10 1 1 1 7}
After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port and aggreate port
Status in source: current.
Names: fsIfOperSpeed
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsIfOperSpeed",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"speed10Mb",
"(",
"1",
")",
",",
"speed100Mb",
"(",
"2",
")",
",",
"speed1000Mb",
"(",
"3",
")",
",",
"unknown",
"(",
"4",
")",
",",
"speed10Gb",
"(",
"5",
")",
",",
"speed40Gb",
"(",
"6",
")",
",",
"speed100Gb",
"(",
"7",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port and aggreate port\"",
"::=",
"{",
"fsIfEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"speed10Mb",
1
],
[
"speed100Mb",
2
],
[
"speed1000Mb",
3
],
[
"unknown",
4
],
[
"speed10Gb",
5
],
[
"speed40Gb",
6
],
[
"speed100Gb",
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port and aggreate port"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-INTERFACE-MIB
fsIfOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mb(1),
speed100Mb(2),
speed1000Mb(3),
unknown(4),
speed10Gb(5),
speed40Gb(6),
speed100Gb(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
This attribute apply physical port and aggreate port"
::= { fsIfEntry 7 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.845940+00:00.
Module: FS-INTERFACE-MIB
fsIfOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mb(1),
speed100Mb(2),
speed1000Mb(3),
unknown(4),
speed10Gb(5),
speed40Gb(6),
speed100Gb(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
This attribute apply physical port and aggreate port"
::= { fsIfEntry 7 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.496038+00:00.
Module: FS-INTERFACE-MIB
fsIfOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mb(1),
speed100Mb(2),
speed1000Mb(3),
unknown(4),
speed10Gb(5),
speed40Gb(6),
speed100Gb(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
This attribute apply physical port and aggreate port"
::= { fsIfEntry 7 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.247003+00:00.
Status in source: current.
Names: fsIfOperSpeed
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsIfOperSpeed",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"speed10Mb",
"(",
"1",
")",
",",
"speed100Mb",
"(",
"2",
")",
",",
"speed1000Mb",
"(",
"3",
")",
",",
"unknown",
"(",
"4",
")",
",",
"speed10Gb",
"(",
"5",
")",
",",
"speed40Gb",
"(",
"6",
")",
",",
"speed100Gb",
"(",
"7",
")",
",",
"speed20Gb",
"(",
"8",
")",
",",
"speed25Gb",
"(",
"9",
")",
",",
"speed2500Mb",
"(",
"10",
")",
",",
"speed5000Mb",
"(",
"11",
")",
",",
"speed50Gb",
"(",
"12",
")",
",",
"speed200Gb",
"(",
"13",
")",
",",
"speed400Gb",
"(",
"14",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port and aggreate port\"",
"::=",
"{",
"fsIfEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"speed10Mb",
1
],
[
"speed100Mb",
2
],
[
"speed1000Mb",
3
],
[
"unknown",
4
],
[
"speed10Gb",
5
],
[
"speed40Gb",
6
],
[
"speed100Gb",
7
],
[
"speed20Gb",
8
],
[
"speed25Gb",
9
],
[
"speed2500Mb",
10
],
[
"speed5000Mb",
11
],
[
"speed50Gb",
12
],
[
"speed200Gb",
13
],
[
"speed400Gb",
14
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"After two port have negotiated the speed status,and this object is the working speed status. while the port link status is down , then the speed status is unknown(4). This attribute apply physical port and aggreate port"
],
null,
null,
null,
null
]
}Module: FS-INTERFACE-MIB
fsIfOperSpeed OBJECT-TYPE
SYNTAX INTEGER {
speed10Mb(1),
speed100Mb(2),
speed1000Mb(3),
unknown(4),
speed10Gb(5),
speed40Gb(6),
speed100Gb(7),
speed20Gb(8),
speed25Gb(9),
speed2500Mb(10),
speed5000Mb(11),
speed50Gb(12),
speed200Gb(13),
speed400Gb(14)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"After two port have negotiated the speed status,and this object
is the working speed status. while the port link status is down ,
then the speed status is unknown(4).
This attribute apply physical port and aggreate port"
::= { fsIfEntry 7 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex', 'ifDescr', 'ifAdminStatus', 'ifOperStatus'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.059057+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.52 | fsIfNeighborIPv6 | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.1.10.2.10.1.1.1.53 | fsIfIsSubPort | 0 | 0 |