{1 3 6 1 4 1 52642 1 1 10 2 10 1 3 1 2}
Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal if opertion is success. Setting its value to 0 will cause no action of the agent. and when query will always return 0. This attribute apply physical port and aggreate port
Status in source: current.
Names: fsIfStatusLoopBackExamine
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsIfStatusLoopBackExamine",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal if opertion is success. Setting its value to 0 will cause no action of the agent. and when query will always return 0. This attribute apply physical port and aggreate port\"",
"::=",
"{",
"fsIfStatusEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Setting its to any value but 0, will Checking whether this port or aggreate can receive and send packets normally, It indicates that port or aggreate is normal if opertion is success. Setting its value to 0 will cause no action of the agent. and when query will always return 0. This attribute apply physical port and aggreate port"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-INTERFACE-MIB
fsIfStatusLoopBackExamine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting its to any value but 0, will Checking whether this port or aggreate can
receive and send packets normally, It indicates that port or aggreate is normal
if opertion is success.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0.
This attribute apply physical port and aggreate port"
::= { fsIfStatusEntry 2 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.845940+00:00.
Module: FS-INTERFACE-MIB
fsIfStatusLoopBackExamine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting its to any value but 0, will Checking whether this port or aggreate can
receive and send packets normally, It indicates that port or aggreate is normal
if opertion is success.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0.
This attribute apply physical port and aggreate port"
::= { fsIfStatusEntry 2 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex', 'ifDescr', 'ifAdminStatus', 'ifOperStatus'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.059057+00:00.
Module: FS-INTERFACE-MIB
fsIfStatusLoopBackExamine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting its to any value but 0, will Checking whether this port or aggreate can
receive and send packets normally, It indicates that port or aggreate is normal
if opertion is success.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0.
This attribute apply physical port and aggreate port"
::= { fsIfStatusEntry 2 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'DateAndTime', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.496038+00:00.
Module: FS-INTERFACE-MIB
fsIfStatusLoopBackExamine OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting its to any value but 0, will Checking whether this port or aggreate can
receive and send packets normally, It indicates that port or aggreate is normal
if opertion is success.
Setting its value to 0 will cause no action of the agent. and when
query will always return 0.
This attribute apply physical port and aggreate port"
::= { fsIfStatusEntry 2 }{'FS-TC': ['ConfigStatus', 'IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'DisplayString', 'PhysAddress', 'MacAddress'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Unsigned32', 'IpAddress'], 'RFC1155-SMI': ['Gauge', 'TimeTicks'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['VlanId'], 'IANAifType-MIB': ['IANAifType'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.247003+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.1.10.2.10.1.3.1.1 | fsIfStatusIndex | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.1.10.2.10.1.3.1.3 | fsIfErrorStatus | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.1.10.2.10.1.3.1.4 | fsIfLineDetect | 0 | 0 |