{1 3 6 1 4 1 52642 1 1 10 2 105 1 1 1 6}
The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber for. The value is in units of kilometers. A value of zero means that the transceiver does not support single mode fiber.
Status in source: current.
Names: fsFiberTransferDistanceSMF
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsFiberTransferDistanceSMF",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber for. The value is in units of kilometers. A value of zero means that the transceiver does not support single mode fiber.\"",
"::=",
"{",
"fsFiberEntry",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The value of transfer distance of the Fiber module insered into the port. This value specifies the link length that is supported by the transceiver while operating in compliance with the applicable standards using single mode fiber for. The value is in units of kilometers. A value of zero means that the transceiver does not support single mode fiber."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: FS-FIBER-MIB
fsFiberTransferDistanceSMF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance with the applicable
standards using single mode fiber for. The value is in units of kilometers.
A value of zero means that the transceiver does not support single mode fiber."
::= { fsFiberEntry 6 }{'FS-TC': ['IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['ifIndex', 'ifDescr'], 'SNMPv2-TC': ['TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP']}Related source files and packages:
Downloaded: 2026-10-23T19:25:11.589118+00:00.
Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FS-FIBER-MIB
fsFiberTransferDistanceSMF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance with the applicable
standards using single mode fiber for. The value is in units of kilometers.
A value of zero means that the transceiver does not support single mode fiber."
::= { fsFiberEntry 6 }{'FS-TC': ['IfIndex'], 'FS-SMI': ['fsMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.820940+00:00.
Module: FS-FIBER-MIB
fsFiberTransferDistanceSMF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance with the applicable
standards using single mode fiber for. The value is in units of kilometers.
A value of zero means that the transceiver does not support single mode fiber."
::= { fsFiberEntry 6 }{'FS-TC': ['IfIndex'], 'FS-SMI': ['fsMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP']}Related source files and packages:
Same file in nc8200-and-nc8400-series-swithes-snmp-mib-files.zip.
Same file in n5860-and-n8560-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:06.483039+00:00.
Module: FS-FIBER-MIB
fsFiberTransferDistanceSMF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance with the applicable
standards using single mode fiber for. The value is in units of kilometers.
A value of zero means that the transceiver does not support single mode fiber."
::= { fsFiberEntry 6 }{'FS-TC': ['IfIndex'], 'FS-SMI': ['fsMgmt'], 'SNMPv2-TC': ['TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP']}Related source files and packages:
Same file in s3100-16tf-switch-snmp-mib-files.zip.
Same file in s5860-series-swithes-snmp-mib-files.zip.
Same file in s3910-series-swithes-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:09.231004+00:00.
Module: FS-FIBER-MIB
fsFiberTransferDistanceSMF OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of transfer distance of the Fiber module insered into the port.
This value specifies the link length that is supported by the
transceiver while operating in compliance with the applicable
standards using single mode fiber for. The value is in units of kilometers.
A value of zero means that the transceiver does not support single mode fiber."
::= { fsFiberEntry 6 }{'FS-TC': ['IfIndex'], 'FS-SMI': ['fsMgmt'], 'IF-MIB': ['ifIndex', 'ifDescr'], 'SNMPv2-TC': ['TruthValue', 'DisplayString'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP']}Related source files and packages:
Same file in 20240129093459svlvsn.zip.
Downloaded: 2026-10-24T13:35:05.041057+00:00.