{1 3 6 1 4 1 52642 1 12 2 1 2}
When you configure a guest VLAN, clients that are not IEEE 802.1x-capable are put into the guest VLAN when the server does not receive a response to its EAP request/identity frame. Clients that are IEEE 802.1x-capable but fail authentication not granted network access.The vlan range is between [2-4094], 0 means guest vlan is not configured.
Status in source: current.
Names: dot1xExtGuestVlan
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dot1xExtGuestVlan",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
"|",
"2",
".",
".",
"4094",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"When you configure a guest VLAN, clients that are not IEEE 802.1x-capable are put into the guest VLAN when the server does not receive a response to its EAP request/identity frame. Clients that are IEEE 802.1x-capable but fail authentication not granted network access.The vlan range is between [2-4094], 0 means guest vlan is not configured.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"dot1xExtVlanPolicyEntry",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0
],
[
2,
4094
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"When you configure a guest VLAN, clients that are not IEEE 802.1x-capable are put into the guest VLAN when the server does not receive a response to its EAP request/identity frame. Clients that are IEEE 802.1x-capable but fail authentication not granted network access.The vlan range is between [2-4094], 0 means guest vlan is not configured."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: FS-SWITCH-V2-MIB
dot1xExtGuestVlan OBJECT-TYPE
SYNTAX Integer32 (0|2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When you configure a guest VLAN, clients that are not IEEE 802.1x-capable
are put into the guest VLAN when the server does not receive a response to
its EAP request/identity frame. Clients that are IEEE 802.1x-capable but
fail authentication not granted network access.The vlan range is
between [2-4094], 0 means guest vlan is not configured."
DEFVAL {0}
::= { dot1xExtVlanPolicyEntry 2 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:11.613118+00:00.
Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: SWITCH
dot1xExtGuestVlan OBJECT-TYPE
SYNTAX Integer32 (0|2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When you configure a guest VLAN, clients that are not IEEE 802.1x-capable
are put into the guest VLAN when the server does not receive a response to
its EAP request/identity frame. Clients that are IEEE 802.1x-capable but
fail authentication not granted network access.The vlan range is
between [2-4094], 0 means guest vlan is not configured."
DEFVAL {0}
::= { dot1xExtVlanPolicyEntry 2 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:11.701115+00:00.
Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FIBERSTORE-MIB
dot1xExtGuestVlan OBJECT-TYPE
SYNTAX Integer32 (0|2..4094)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "When you configure a guest VLAN, clients that are not IEEE 802.1x-capable
are put into the guest VLAN when the server does not receive a response to
its EAP request/identity frame. Clients that are IEEE 802.1x-capable but
fail authentication not granted network access.The vlan range is
between [2-4094], 0 means guest vlan is not configured."
DEFVAL {0}
::= { dot1xExtVlanPolicyEntry 2 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.806941+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.12.2.1.1 | dot1xExtVlanPolicyIndex | 0 | 0 |