{1 3 6 1 4 1 52642 1 14 6 1 10}
An indication of whether the LoopGuard capability is enabled on this port or not. When a port's loop guard is enabled(1) , and BPDUs are not received on a non-designated port after max_age, that port should move into the STP loop-inconsistent blocking state and should not pass user traffic. The default value is disabled(2).
Status in source: current.
Names: stpxLoopGuardObjects
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"stpxLoopGuardObjects",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"1",
")",
",",
"disabled",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"An indication of whether the LoopGuard capability is enabled on this port or not. When a port's loop guard is enabled(1) , and BPDUs are not received on a non-designated port after max_age, that port should move into the STP loop-inconsistent blocking state and should not pass user traffic. The default value is disabled(2).\"",
"::=",
"{",
"stpExtPortEntry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
1
],
[
"disabled",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"An indication of whether the LoopGuard capability is enabled on this port or not. When a port's loop guard is enabled(1) , and BPDUs are not received on a non-designated port after max_age, that port should move into the STP loop-inconsistent blocking state and should not pass user traffic. The default value is disabled(2)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: FS-SWITCH-V2-MIB
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:11.613118+00:00.
Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: SWITCH
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:11.701115+00:00.
Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FIBERSTORE-MIB
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.806941+00:00.
Module: SWITCH
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:04.541064+00:00.
Module: SWITCH
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:11.563974+00:00.
Module: SWITCH
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in s5850-and-s8050-series-switches-snmp-mib-files.zip.
Same file in s5800-48t4s-switch-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:11.819971+00:00.
Module: SWITCH
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:12.362964+00:00.
Module: SWITCH
stpxLoopGuardObjects OBJECT-TYPE
SYNTAX INTEGER {enabled(1),disabled(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An indication of whether the LoopGuard capability is enabled
on this port or not.
When a port's loop guard is enabled(1) , and BPDUs are not received
on a non-designated port after max_age, that port should move into
the STP loop-inconsistent blocking state and should not pass user traffic.
The default value is disabled(2)."
::= { stpExtPortEntry 10 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:25.761792+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.14.6.1.1 | stpxpPortIndex | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.2 | stpxRootGuardObjects | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.3 | stpxRestrictedTcnObjects | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.4 | stpxRestrictedRoleObjects | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.5 | stpxEdgePortAdminBpduGuardObjects | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.6 | stpxEdgePortOperBpduGuardObjects | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.7 | stpxEdgePortAdminBpduFilterObjects | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.8 | stpxEdgePortOperBpduFilterObjects | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.14.6.1.9 | stpxForceVersionObjects | 0 | 0 |