Reference record for OID 1.3.6.1.4.1.52642.1.33.1.1

Parent
1.3.6.1.4.1.52642.1.33.1 (stmMibObject)
Node code
1
Node name
stmCurrentType
Numeric OID
1.3.6.1.4.1.52642.1.33.1.1
URN notation
urn:oid:1.3.6.1.4.1.52642.1.33.1.1
ASN.1 notation

{1 3 6 1 4 1 52642 1 33 1 1}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fs(52642) products(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fs(52642) switch(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fs(52642) nmsProducts(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fs(52642) fsProducts(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fs(52642) system(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fs(52642) fsProductId(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(52642) products(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(52642) switch(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(52642) nmsProducts(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(52642) fsProducts(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(52642) system(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nms(52642) fsProductId(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fiberstore(52642) products(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fiberstore(52642) switch(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fiberstore(52642) nmsProducts(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) fiberstore(52642) fsProducts(1) stm(33) stmMibObject(1) stmCurrentType(1)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/52642/1/33/1/1
  • /ISO/Identified-Organization/6/1/4/1/52642/1/33/1/1
  • /ISO/3/6/1/4/1/52642/1/33/1/1
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/fs/products/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fs/switch/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fs/nmsProducts/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fs/fsProducts/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fs/system/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fs/fsProductId/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/nms/products/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/nms/switch/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/nms/nmsProducts/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/nms/fsProducts/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/nms/system/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/nms/fsProductId/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fiberstore/products/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fiberstore/switch/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fiberstore/nmsProducts/stm/stmMibObject/stmCurrentType
  • /iso/identified-organization/dod/internet/private/enterprise/fiberstore/fsProducts/stm/stmMibObject/stmCurrentType
  • Additional combinations skipped.

Descriptions

stmCurrentType — FS.COM official Documentation Hub native MIB packages

STM type: default(0) Balance on all kinds of tables size. l2vpn(1) VPWS/VPLS with more MPLS/MAC/USERID entries. ipv4(2) Unicast bias, supporting more IPv4 Ucast Routes. vlan(3) VLAN bias, supporting more MAC entries

stmCurrentType — FS.COM official Documentation Hub native MIB packages, FS.COM MIB copies (LibreNMS/Observium Community)

STM type: default(0) provide balance to all features. ipv4(1) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(2) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. ipv6(3) provide maximum system utilization for IPv6 unicast routing. hardware(50) provide default hardware configure.

Source records

stmCurrentType

Status in source: current.

Names: stmCurrentType

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "stmCurrentType",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "default",
    "(",
    "0",
    ")",
    ",",
    "l2vpn",
    "(",
    "1",
    ")",
    ",",
    "ipv4",
    "(",
    "2",
    ")",
    ",",
    "vlan",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"STM type: default(0) Balance on all kinds of tables size. l2vpn(1) VPWS/VPLS with more MPLS/MAC/USERID entries. ipv4(2) Unicast bias, supporting more IPv4 Ucast Routes. vlan(3) VLAN bias, supporting more MAC entries\"",
    "DEFVAL",
    "{",
    "default",
    "}",
    "::=",
    "{",
    "stmMibObject",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "default",
            0
          ],
          [
            "l2vpn",
            1
          ],
          [
            "ipv4",
            2
          ],
          [
            "vlan",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "STM type: default(0) Balance on all kinds of tables size. l2vpn(1) VPWS/VPLS with more MPLS/MAC/USERID entries. ipv4(2) Unicast bias, supporting more IPv4 Ucast Routes. vlan(3) VLAN bias, supporting more MAC entries"
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "default"
    ]
  ]
}
  • FS.COM official Documentation Hub native MIB packages · Publisher's source file: Source package: s5800-48f4s-switch-snmp-mib-files.zip

    Module: SWITCH

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        l2vpn(1),
        ipv4(2),
        vlan(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION 
            "STM type:
		        default(0)  Balance on all kinds of tables size.
		        l2vpn(1)   	VPWS/VPLS with more MPLS/MAC/USERID entries.
		        ipv4(2)     Unicast bias, supporting more IPv4 Ucast Routes.
		        vlan(3)     VLAN bias, supporting more MAC entries"
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:

    • S5800-48F4S Switch SNMP MIB Files.zipS5800-48F4S Switch SNMP MIB Files.zip; Models: S5800-48F4S; Catalog updated: 2024-05-28 17:56:22; File: mall/file/user_manual/s5800-48f4s-switch-snmp-mib-files.zip; Publisher Last-Modified: Fri, 05 Aug 2022 14:37:42 GMT; 634,557 bytes

    Source location: SWITCH::stmCurrentType.
    Source version and references

    Downloaded: 2026-10-24T13:35:11.563974+00:00.

stmCurrentType

Status in source: current.

Names: stmCurrentType

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "stmCurrentType",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "default",
    "(",
    "0",
    ")",
    ",",
    "ipv4",
    "(",
    "1",
    ")",
    ",",
    "vlan",
    "(",
    "2",
    ")",
    ",",
    "ipv6",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"STM type: default(0) provide balance to all features. ipv4(1) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(2) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. ipv6(3) provide maximum system utilization for IPv6 unicast routing. hardware(50) provide default hardware configure.\"",
    "DEFVAL",
    "{",
    "default",
    "}",
    "::=",
    "{",
    "stmMibObject",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "default",
            0
          ],
          [
            "ipv4",
            1
          ],
          [
            "vlan",
            2
          ],
          [
            "ipv6",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "STM type: default(0) provide balance to all features. ipv4(1) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(2) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. ipv6(3) provide maximum system utilization for IPv6 unicast routing. hardware(50) provide default hardware configure."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "default"
    ]
  ]
}
  • FS.COM MIB copies (LibreNMS/Observium Community) · Publisher's source file: FS-SWITCH-V2-MIB

    Vendor MIB copy from the LibreNMS archive. FS.COM support.

    Module: FS-SWITCH-V2-MIB

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        ipv4(1),
        vlan(2),
        ipv6(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(0)   provide balance to all features.
        ipv4(1)      provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(2)      provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        ipv6(3)      provide maximum system utilization for IPv6 unicast routing.
        hardware(50) provide default hardware configure."
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:


    Source location: FS-SWITCH-V2-MIB::stmCurrentType.
    Source version and references

    Downloaded: 2026-10-23T19:25:11.613118+00:00.

  • FS.COM MIB copies (LibreNMS/Observium Community) · Publisher's source file: SWITCH

    Vendor MIB copy from the LibreNMS archive. FS.COM support.

    Module: SWITCH

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        ipv4(1),
        vlan(2),
        ipv6(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(0)   provide balance to all features.
        ipv4(1)      provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(2)      provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        ipv6(3)      provide maximum system utilization for IPv6 unicast routing.
        hardware(50) provide default hardware configure."
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:


    Source location: SWITCH::stmCurrentType.
    Source version and references

    Downloaded: 2026-10-23T19:25:11.701115+00:00.

  • FS.COM MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

    Vendor MIB copy from the Observium Community archive. FS.COM support.

    Module: FIBERSTORE-MIB

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        ipv4(1),
        vlan(2),
        ipv6(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(0)   provide balance to all features.
        ipv4(1)      provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(2)      provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        ipv6(3)      provide maximum system utilization for IPv6 unicast routing.
        hardware(50) provide default hardware configure."
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:


    Source location: FIBERSTORE-MIB::stmCurrentType.
    Source version and references

    Downloaded: 2026-10-23T19:25:17.806941+00:00.

  • FS.COM official Documentation Hub native MIB packages · Publisher's source file: Source package: 20230116142624312suk.zip

    Module: SWITCH

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        ipv4(1),
        vlan(2),
        ipv6(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(0)   provide balance to all features.
        ipv4(1)      provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(2)      provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        ipv6(3)      provide maximum system utilization for IPv6 unicast routing.
        hardware(50) provide default hardware configure."
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:

    • S3950-4T12S Switch SNMP MIB FilesS3950-4T12S Switch SNMP MIB Files; Models: S3950-4T12S; Catalog updated: 2024-05-28 19:29:26; File: mall/doc/20230116142624312suk.zip; Publisher Last-Modified: Mon, 16 Jan 2023 06:26:27 GMT; 205,405 bytes

    Source location: SWITCH::stmCurrentType.
    Source version and references

    Downloaded: 2026-10-24T13:35:04.541064+00:00.

  • FS.COM official Documentation Hub native MIB packages · Publisher's source file: Source package: s5800-48f4sr-switch-snmp-mib-files.zip

    Module: SWITCH

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        ipv4(1),
        vlan(2),
        ipv6(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(0)   provide balance to all features.
        ipv4(1)      provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(2)      provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        ipv6(3)      provide maximum system utilization for IPv6 unicast routing.
        hardware(50) provide default hardware configure."
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:

    • S5800-48T4S Switch SNMP MIB FilesS5800-48T4S Switch SNMP MIB Files; Models: S5800-48T4S; Catalog updated: 2024-05-28 19:24:44; File: mall/file/user_manual/s5800-48t4s-switch-snmp-mib-files.zip; Publisher Last-Modified: Fri, 05 Aug 2022 14:38:07 GMT; 678,611 bytes
    • S5800-48F4SR Switch SNMP MIB FilesS5800-48F4SR Switch SNMP MIB Files; Models: S5800-48F4SR; Catalog updated: 2024-05-28 19:24:43; File: mall/file/user_manual/s5800-48f4sr-switch-snmp-mib-files.zip; Publisher Last-Modified: Fri, 05 Aug 2022 14:37:50 GMT; 678,611 bytes
    • S5850 and S8050 Series Switches SNMP MIB FilesS5850 and S8050 Series Switches SNMP MIB Files; Models: S5850-24S2Q, S5850-24T16B, S5850-24T16S, S5850-32S2Q, S5850-48S2Q4C, S5850-48S6Q, S5850-48T4Q, S5850-48XMG8C, S8050-20Q4C; Catalog updated: 2026-06-12 10:13:52; File: mall/file/user_manual/s5850-and-s8050-series-switches-snmp-mib-files.zip; Publisher Last-Modified: Fri, 05 Aug 2022 14:39:46 GMT; 678,611 bytes

    Source location: SWITCH::stmCurrentType.
    Source version and references

    Same file in s5850-and-s8050-series-switches-snmp-mib-files.zip.

    Same file in s5800-48t4s-switch-snmp-mib-files.zip.

    Downloaded: 2026-10-24T13:35:11.819971+00:00.

  • FS.COM official Documentation Hub native MIB packages · Publisher's source file: Source package: s5800-8tf12s-switch-snmp-mib-files.zip

    Module: SWITCH

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        ipv4(1),
        vlan(2),
        ipv6(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(0)   provide balance to all features.
        ipv4(1)      provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(2)      provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        ipv6(3)      provide maximum system utilization for IPv6 unicast routing.
        hardware(50) provide default hardware configure."
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:

    • S5800-8TF12S Switch SNMP MIB FilesS5800-8TF12S Switch SNMP MIB Files; Models: S5800-8TF12S; Catalog updated: 2024-05-28 19:24:43; File: mall/file/user_manual/s5800-8tf12s-switch-snmp-mib-files.zip; Publisher Last-Modified: Fri, 05 Aug 2022 14:38:22 GMT; 632,454 bytes

    Source location: SWITCH::stmCurrentType.
    Source version and references

    Downloaded: 2026-10-24T13:35:12.362964+00:00.

  • FS.COM official Documentation Hub native MIB packages · Publisher's source file: Source package: s8550-6q2c-switch-snmp-mib-files.zip

    Module: SWITCH

    Published definition
    stmCurrentType OBJECT-TYPE
    SYNTAX          INTEGER
    {
        default(0),
        ipv4(1),
        vlan(2),
        ipv6(3)
    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
            "STM type:
        default(0)   provide balance to all features.
        ipv4(1)      provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
        vlan(2)      provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
        ipv6(3)      provide maximum system utilization for IPv6 unicast routing.
        hardware(50) provide default hardware configure."
    DEFVAL         { default }
    ::= { stmMibObject 1 }
    Module imports
    {'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}

    Related source files and packages:

    • S8550-6Q2C Switch SNMP MIB FilesS8550-6Q2C Switch SNMP MIB Files; Models: S8550-6Q2C; Catalog updated: 2025-06-03 16:51:25; File: mall/resource/s8550-6q2c-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 03 Jun 2025 08:51:25 GMT; 203,494 bytes

    Source location: SWITCH::stmCurrentType.
    Source version and references

    Downloaded: 2026-10-24T13:35:25.761792+00:00.

Current Registration Authority (inferred from ancestor 1.3.6.1.4.1.52642)

FS.COM INC

Siblings (2)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.52642.1.33.1.2 stmNextType00
1.3.6.1.4.1.52642.1.33.1.3 stmShowTable153