{1 3 6 1 4 1 52642 1 33 1 3 1 1}
STM type: default(0) Balance on all kinds of tables size. l2vpn(1) VPWS/VPLS with more MPLS/MAC/USERID entries. ipv4(2) Unicast bias, supporting more IPv4 Ucast Routes. vlan(3) VLAN bias, supporting more MAC entries
STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image. ipv6(6) provide maximum system utilization for IPv6 unicast routing. route(7) provide maximum system utilization for Ucast Routes. v4acl(8) provide maximum system utilization for IPv4 ACL. v6acl(9) provide maximum system utilization for IPv6 ACL. hardware(50) provide default hardware configure.
Status in source: current.
Names: stmProfileType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"stmProfileType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"default",
"(",
"0",
")",
",",
"l2vpn",
"(",
"1",
")",
",",
"ipv4",
"(",
"2",
")",
",",
"vlan",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"STM type: default(0) Balance on all kinds of tables size. l2vpn(1) VPWS/VPLS with more MPLS/MAC/USERID entries. ipv4(2) Unicast bias, supporting more IPv4 Ucast Routes. vlan(3) VLAN bias, supporting more MAC entries\"",
"::=",
"{",
"stmShowEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"default",
0
],
[
"l2vpn",
1
],
[
"ipv4",
2
],
[
"vlan",
3
]
]
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"STM type: default(0) Balance on all kinds of tables size. l2vpn(1) VPWS/VPLS with more MPLS/MAC/USERID entries. ipv4(2) Unicast bias, supporting more IPv4 Ucast Routes. vlan(3) VLAN bias, supporting more MAC entries"
],
null,
null,
null,
null
]
}Module: SWITCH
stmProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(0),
l2vpn(1),
ipv4(2),
vlan(3)
}
-- modified by liuht for bug 23953,2013-07-16
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"STM type:
default(0) Balance on all kinds of tables size.
l2vpn(1) VPWS/VPLS with more MPLS/MAC/USERID entries.
ipv4(2) Unicast bias, supporting more IPv4 Ucast Routes.
vlan(3) VLAN bias, supporting more MAC entries"
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:11.563974+00:00.
Status in source: current.
Names: stmShowProfileType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"stmShowProfileType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"default",
"(",
"1",
")",
",",
"access",
"(",
"2",
")",
",",
"ipucv4",
"(",
"3",
")",
",",
"vlan",
"(",
"4",
")",
",",
"l2vpn",
"(",
"5",
")",
",",
"route",
"(",
"6",
")",
",",
"v4acl",
"(",
"7",
")",
",",
"v6acl",
"(",
"8",
")",
",",
"ipucv6",
"(",
"9",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image. ipv6(6) provide maximum system utilization for IPv6 unicast routing. route(7) provide maximum system utilization for Ucast Routes. v4acl(8) provide maximum system utilization for IPv4 ACL. v6acl(9) provide maximum system utilization for IPv6 ACL. hardware(50) provide default hardware configure.\"",
"::=",
"{",
"stmShowEntry",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"default",
1
],
[
"access",
2
],
[
"ipucv4",
3
],
[
"vlan",
4
],
[
"l2vpn",
5
],
[
"route",
6
],
[
"v4acl",
7
],
[
"v6acl",
8
],
[
"ipucv6",
9
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"STM type: default(1) provide balance to all features. access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge. ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network. vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch. l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image. ipv6(6) provide maximum system utilization for IPv6 unicast routing. route(7) provide maximum system utilization for Ucast Routes. v4acl(8) provide maximum system utilization for IPv4 ACL. v6acl(9) provide maximum system utilization for IPv6 ACL. hardware(50) provide default hardware configure."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: FS-SWITCH-V2-MIB
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:11.613118+00:00.
Vendor MIB copy from the LibreNMS archive. FS.COM support.
Module: SWITCH
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:11.701115+00:00.
Vendor MIB copy from the Observium Community archive. FS.COM support.
Module: FIBERSTORE-MIB
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:17.806941+00:00.
Module: SWITCH
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:04.541064+00:00.
Module: SWITCH
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Same file in s5850-and-s8050-series-switches-snmp-mib-files.zip.
Same file in s5800-48t4s-switch-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:11.819971+00:00.
Module: SWITCH
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:12.362964+00:00.
Module: SWITCH
stmShowProfileType OBJECT-TYPE
SYNTAX INTEGER
{
default(1),
access(2),
ipucv4(3),
vlan(4),
l2vpn(5),
route(6),
v4acl(7),
v6acl(8),
ipucv6(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"STM type:
default(1) provide balance to all features.
access(2) provide maximum system utilization for QoS classification ACEs, and security ACEs. You would typically use this profile for an access switch at the network edge.
ipvuc4(3) provide maximum system utilization for unicast routing. You would typically use this profile for a router or aggregator in the middle of a network.
vlan(4) provide maximum system utilization for VLANs. This proflie maximizes system memory for use as a Layer 2 switch.
l2vpn(5) provide maximum system utilization for Layer2 VPN. This profile is only existed on metro advanced image.
ipv6(6) provide maximum system utilization for IPv6 unicast routing.
route(7) provide maximum system utilization for Ucast Routes.
v4acl(8) provide maximum system utilization for IPv4 ACL.
v6acl(9) provide maximum system utilization for IPv6 ACL.
hardware(50) provide default hardware configure."
::= { stmShowEntry 1 }{'IF-MIB': ['ifIndex', 'InterfaceIndex', 'InterfaceIndexOrZero', 'ifIndex'], 'RMON-MIB': ['OwnerString'], 'VRRP-MIB': ['VrId'], 'SNMPv2-TC': ['TestAndIncr', 'TimeStamp', 'AutonomousType', 'DisplayString', 'PhysAddress', 'TEXTUAL-CONVENTION', 'TruthValue', 'DateAndTime', 'MacAddress', 'RowStatus'], 'SNMPv2-SMI': ['TimeTicks', 'Counter32', 'OBJECT-IDENTITY', 'mib-2', 'MODULE-IDENTITY', 'IpAddress', 'Counter64', 'Unsigned32', 'Integer32', 'Gauge32', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressPrefixLength', 'InetAddress', 'InetAddressType'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Downloaded: 2026-10-24T13:35:25.761792+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.1.33.1.3.1.2 | stmShowVlanNumber, stmVlanNumber | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.3 | stmShowVlanForwardingInstances, stmVlanForwardingInstances | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.4 | stmShowUcastMacAddresses, stmUcastMacAddresses | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.5 | stmShowMcastMacAddresses, stmMcastMacAddresses | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.6 | stmShowBlackholeMacAddresses, stmBlackholeMacAddresses | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.7 | stmShowMaxAppliedVlanMapping, stmMaxAppliedVlanMapping | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.8 | stmShowCfmLocalAndRemoteMeps, stmCfmLocalAndRemoteMeps | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.9 | stmShowG8031Groups, stmG8031Groups | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.10 | stmShowG8032Rings, stmG8032Rings | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.11 | stmShowMacBasedVlanClassification, stmMacBasedVlanClassification | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.12 | stmShowIpv4BasedVlanClassification, stmIpv4BasedVlanClassification | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.13 | stmShowIpv6BasedVlanClassification, stmIpv4HostRoutes | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.14 | stmShowIpv4HostRoutes, stmIndirectIpv4Routes | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.15 | stmShowIndirectIpv4Routes, stmIpv4EcmpGroups | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.16 | stmShowIpv4EcmpGroups, stmPolicyBasedRoutes | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.17 | stmShowIpv6HostRoutes, stmIpv4McastRoutes | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.18 | stmShowIndirectIpv6Routes, stmIpv4McastTotalMembers | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.19 | stmShowIpv6EcmpGroups, stmIpv4SourceGuardEntries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.20 | stmShowIpTunnelPeers, stmIpv4AclAndQosFlowEntries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.21 | stmShowNatForIviPeers, stmFtn | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.22 | stmShowIpv4McastRoutes, stmIncomingLabelMap | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.23 | stmShowIpv4McastTotalMembers, stmVpws | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.24 | stmShowIpv6McastRoutes, stmVplsPeer | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.25 | stmShowIpv6McastTotalMembers, stmVplsAc | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.26 | stmShowIpv4SourceGuardEntries, stmVplsInstance | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.27 | stmShowIpv6SourceGuardEntries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.28 | stmShowIpv4AclAndQosFlowEntries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.29 | stmShowIpv6AclAndQosFlowEntries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.30 | stmShowFtn | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.31 | stmShowIncomingLabelMap | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.32 | stmShowVpws | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.33 | stmShowLspPe | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.34 | stmShowLspP | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.35 | stmShowVplsPeer | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.36 | stmShowVplsAc | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.37 | stmShowVplsInstance | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.38 | stmShowLspOam | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.39 | stmShowOamForPseudoWrie | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.40 | stmShowMplsApsTunnel | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.41 | stmShowVlanMappingEntryAppliedPort | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.42 | stmShowVlanMemberPorts | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.43 | stmShowVlanMappingDefaultEntry | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.44 | stmShowL2mcMemberPorts | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.45 | stmShowL2mcv6Entries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.46 | stmShowL2mcv6MemberPorts | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.47 | stmShowPBREntries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.48 | stmShowPBRv6Entries | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.49 | stmShowVoiceVlan | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.50 | stmShowG8032MemberPortsPerRing | 0 | 0 | |
| 1.3.6.1.4.1.52642.1.33.1.3.1.51 | stmShowMPLSLables | 0 | 0 |