Reference record for OID 1.3.6.1.4.1.52642.2.1.45.1.2.1.1.5

portFlowCtrlCfg

Status in source: current.

Names: portFlowCtrlCfg

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "portFlowCtrlCfg",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "enabled",
    "(",
    "1",
    ")",
    ",",
    "disabled",
    "(",
    "2",
    ")",
    ",",
    "tx",
    "(",
    "5",
    ")",
    ",",
    "rx",
    "(",
    "6",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"(1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (5) Flow control mechanism is enabled with tx pause mechanism only. (6) Flow control mechansim is enabled with rx pause mechansim only. Fast ethernet ports can be set as: enabled(1), disabled(2). Gigabit ethernet ports can be set as: enabled(1), disabled(2), tx(5), rx(6). The actual flow control mechanism is used given by portFlowCtrlStatus.\"",
    "DEFVAL",
    "{",
    "enabled",
    "}",
    "::=",
    "{",
    "portEntry",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "enabled",
            1
          ],
          [
            "disabled",
            2
          ],
          [
            "tx",
            5
          ],
          [
            "rx",
            6
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "(1) Flow control mechanism is enabled with tx and rx pause mechansim. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, the port uses IEEE 802.3x flow control mechanism. If the port type is hundredBaseFX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in fullDuplex mode, Flow control mechanism will not function. (2) Flow control mechanism is disabled. (5) Flow control mechanism is enabled with tx pause mechanism only. (6) Flow control mechansim is enabled with rx pause mechansim only. Fast ethernet ports can be set as: enabled(1), disabled(2). Gigabit ethernet ports can be set as: enabled(1), disabled(2), tx(5), rx(6). The actual flow control mechanism is used given by portFlowCtrlStatus."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "enabled"
    ]
  ]
}

• FS.COM MIB copies (LibreNMS/Observium Community) · Publisher's source file: FS-MIB

  Vendor MIB copy from the LibreNMS archive. FS.COM support.

  Module: FS-MIB

  Published definition

  portFlowCtrlCfg OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                          enabled(1),
                          disabled(2),
                          tx(5),
                          rx(6)
                      }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "(1) Flow control mechanism is enabled with tx and rx pause
                           mechansim.
                           If the port type is hundredBaseTX or thousandBaseSX:
                           When the port is operating in halfDuplex mode, the
                           port uses backPressure flow control mechanism. When
                           the port is operating in fullDuplex mode, the port
                           uses IEEE 802.3x flow control mechanism.
                           If the port type is hundredBaseFX:
                           When the port is operating in halfDuplex mode, the
                           port uses backPressure flow control mechanism. When
                           the port is operating in fullDuplex mode, Flow
                           control mechanism will not function.
                       (2) Flow control mechanism is disabled.
                       (5) Flow control mechanism is enabled with tx pause
                           mechanism only.
                       (6) Flow control mechansim is enabled with rx pause
                           mechansim only.
  
                       Fast ethernet ports can be set as:
                           enabled(1),
                           disabled(2).
                       Gigabit ethernet ports can be set as:
                           enabled(1),
                           disabled(2),
                           tx(5),
                           rx(6).
                       The actual flow control mechanism is used given by
                       portFlowCtrlStatus."
          DEFVAL      { enabled }
          ::= { portEntry 5 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'RowPointer'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Gauge32'], 'DIFFSERV-MIB': ['diffServClfrEntry', 'diffServMultiFieldClfrEntry', 'IndexIntegerNextFree', 'IndexInteger'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'TOKEN-RING-RMON-MIB': ['MacAddress']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: FS-MIB::portFlowCtrlCfg.
  Source version and references

  Downloaded: 2026-10-23T19:25:11.596118+00:00.

• FS.COM official Documentation Hub native MIB packages · Publisher's source file: Source package: fs-s3900-series-switches-snmp-mib-files.zip

  Module: FS-MIB

  Published definition

  portFlowCtrlCfg OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                          enabled(1),
                          disabled(2),
                          tx(5),
                          rx(6)
                      }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "(1) Flow control mechanism is enabled with tx and rx pause
                           mechansim.
                           If the port type is hundredBaseTX or thousandBaseSX:
                           When the port is operating in halfDuplex mode, the
                           port uses backPressure flow control mechanism. When
                           the port is operating in fullDuplex mode, the port
                           uses IEEE 802.3x flow control mechanism.
                           If the port type is hundredBaseFX:
                           When the port is operating in halfDuplex mode, the
                           port uses backPressure flow control mechanism. When
                           the port is operating in fullDuplex mode, Flow
                           control mechanism will not function.
                       (2) Flow control mechanism is disabled.
                       (5) Flow control mechanism is enabled with tx pause
                           mechanism only.
                       (6) Flow control mechansim is enabled with rx pause
                           mechansim only.
  
                       Fast ethernet ports can be set as:
                           enabled(1),
                           disabled(2).
                       Gigabit ethernet ports can be set as:
                           enabled(1),
                           disabled(2),
                           tx(5),
                           rx(6).
                       The actual flow control mechanism is used given by
                       portFlowCtrlStatus."
          DEFVAL      { enabled }
          ::= { portEntry 5 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'InterfaceIndexOrZero'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'RowPointer'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Gauge32'], 'DIFFSERV-MIB': ['diffServClfrEntry', 'diffServMultiFieldClfrEntry', 'IndexIntegerNextFree', 'IndexInteger'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'TOKEN-RING-RMON-MIB': ['MacAddress']}

  Related source files and packages:

  • S3900 Series Swithes SNMP MIB FilesS3900 Series Swithes SNMP MIB Files; Models: S3900-24F4S, S3900-24T4S, S3900-48T4S; Catalog updated: 2024-05-28 19:23:59; File: mall/file/user_manual/fs-s3900-series-switches-snmp-mib-files.zip; Publisher Last-Modified: Fri, 05 Aug 2022 14:30:33 GMT; 97,594 bytes
  
  Source location: FS-MIB::portFlowCtrlCfg.
  Source version and references

  Downloaded: 2026-10-24T13:35:07.337028+00:00.