{1 3 6 1 4 1 52642 2 126 1 2 1 9}
The second specification of the remote peer's IP address for the associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the IKETunnelTable). If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the remote peer type is others, this is a zero-length string.
Status in source: current.
Names: fsIPsecTunIKETunRemoteIDVal2V2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsIPsecTunIKETunRemoteIDVal2V2",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"(",
"SIZE",
"(",
"0",
".",
".",
"255",
")",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The second specification of the remote peer's IP address for the associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the IKETunnelTable). If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the remote peer type is others, this is a zero-length string.\"",
"::=",
"{",
"fsIPsecTunnelV2Entry",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"DisplayString",
[
"octetStringSubType",
[
[
0,
255
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The second specification of the remote peer's IP address for the associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the IKETunnelTable). If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this is the subnet mask. If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is the ending IP address of the range. If the remote peer type is others, this is a zero-length string."
],
null,
null,
null,
null
]
}Module: FS-IPSEC-MONITOR-V2-MIB
fsIPsecTunIKETunRemoteIDVal2V2 OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The second specification of the remote peer's IP address for the
associated IPsec Phase-1 IKE Tunnel(IKETunRemoteValue2 in the
IKETunnelTable).
If the remote peer type is ipv4AddrSubnet/ipv6AddrSubnet, this
is the subnet mask.
If the remote peer type is ipv4AddrRange/ipv6AddrRange, this is
the ending IP address of the range.
If the remote peer type is others, this is a zero-length string."
::= { fsIPsecTunnelV2Entry 9 }{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'TruthValue'], 'FS-OID-MIB': ['fsCommon'], 'SNMPv2-SMI': ['Integer32', 'Counter32', 'Counter64', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'Gauge32', 'NOTIFICATION-TYPE', 'Unsigned32'], 'RFC1213-MIB': ['ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}Related source files and packages:
Same file in tsn3220-10s-u-switch-snmp-mib-files.zip.
Same file in tsn3220-10s-switch-snmp-mib-files.zip.
Same file in ies5220-6s-3es-switch-snmp-mib-files.zip.
Same file in ies5220-30ts-3es-switch-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:15.484924+00:00.