{1 3 6 1 4 1 52642 2 14 9}
The PSE policy only applies to the situation that when a new board (PSE) is inserted, and the power is overload. A value of priority(2) means that the power will stop supplying to the low priority PSE. About PSE priority, please refer to fsMainPsePowerPriority. A value of disabled(1) means that the power will stop supplying to the new inserted PSE. The default value of this object is disabled(1).
Status in source: current.
Names: fsPsePolicyMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsPsePolicyMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"disabled",
"(",
"1",
")",
",",
"priority",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The PSE policy only applies to the situation that when a new board (PSE) is inserted, and the power is overload. A value of priority(2) means that the power will stop supplying to the low priority PSE. About PSE priority, please refer to fsMainPsePowerPriority. A value of disabled(1) means that the power will stop supplying to the new inserted PSE. The default value of this object is disabled(1).\"",
"::=",
"{",
"fsPowerEthernetExt",
"9",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"disabled",
1
],
[
"priority",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The PSE policy only applies to the situation that when a new board (PSE) is inserted, and the power is overload. A value of priority(2) means that the power will stop supplying to the low priority PSE. About PSE priority, please refer to fsMainPsePowerPriority. A value of disabled(1) means that the power will stop supplying to the new inserted PSE. The default value of this object is disabled(1)."
],
null,
null,
null,
null
]
}Module: FS-POWER-ETH-EXT-MIB
fsPsePolicyMode OBJECT-TYPE
SYNTAX INTEGER
{
disabled(1),
priority(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The PSE policy only applies to the situation that when a new
board (PSE) is inserted, and the power is overload.
A value of priority(2) means that the power will stop supplying
to the low priority PSE. About PSE priority, please refer to
fsMainPsePowerPriority. A value of disabled(1) means that the
power will stop supplying to the new inserted PSE. The default
value of this object is disabled(1)."
::= { fsPowerEthernetExt 9 }{'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TEXTUAL-CONVENTION'], 'FS-OID-MIB': ['fsCommon'], 'SNMPv2-SMI': ['Integer32', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE'], 'SNMPv2-CONF': ['OBJECT-GROUP', 'MODULE-COMPLIANCE', 'NOTIFICATION-GROUP'], 'POWER-ETHERNET-MIB': ['pethPsePortGroupIndex', 'pethPsePortIndex', 'pethMainPseGroupIndex', 'pethPsePortDetectionStatus']}Related source files and packages:
Same file in tsn3220-10s-u-switch-snmp-mib-files.zip.
Same file in tsn3220-10s-switch-snmp-mib-files.zip.
Same file in ies5220-6s-3es-switch-snmp-mib-files.zip.
Same file in ies5220-30ts-3es-switch-snmp-mib-files.zip.
Downloaded: 2026-10-24T13:35:15.630922+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52642.2.14.1 | fsPsePortTable | 1 | 8 | |
| 1.3.6.1.4.1.52642.2.14.2 | fsMainPseTable | 1 | 8 | |
| 1.3.6.1.4.1.52642.2.14.3 | fsPseAutoDetectActive | 0 | 0 | |
| 1.3.6.1.4.1.52642.2.14.4 | fsPseComformance | 2 | 15 | |
| 1.3.6.1.4.1.52642.2.14.5 | fsPsePowerMaxValue | 0 | 0 | |
| 1.3.6.1.4.1.52642.2.14.6 | fspseportNotification | 22 | 22 | |
| 1.3.6.1.4.1.52642.2.14.7 | fsPseProfilesTable | 1 | 9 | |
| 1.3.6.1.4.1.52642.2.14.8 | fsPOEPowerObjects | 7 | 61 | |
| 1.3.6.1.4.1.52642.2.14.10 | fsPDPolicyMode | 0 | 0 | |
| 1.3.6.1.4.1.52642.2.14.11 | fsPseNotification | 2 | 6 | |
| 1.3.6.1.4.1.52642.2.14.12 | fsPOEPortName | 0 | 0 | |
| 1.3.6.1.4.1.52642.2.14.13 | fsPOEInputPortState | 0 | 0 | |
| 1.3.6.1.4.1.52642.2.14.14 | fsPseportNotification2 | 1 | 2 |