Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsQoSSysCapCharacteristicsValue",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The system capability characteristics value of modules of QoS. car module: Index Characteristic Value 1 car function 1, if supported. 2 global car If one of the last 3 bits of this object is set to 1, it indicates that global CAR is supported. bit 0 stands for aggregative CAR, bit 1 stands for hierarchy CAR, bit 2 stands for common global CAR. 3 mqc car 1, if supported. 4 mqc global car bit 0 stands for application of aggregative CAR by MQC, bit 1 stands for application of hierarchy CAR by MQC. 5 if car If one of the last 2 bits of this object is set to 1, it indicates that interface CAR is supported. bit 0 stands for normal CAR on interface, bit 1 stands for application of aggregative CAR on interface. 6 mqc car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 7 aggregative car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 8 hierarchy car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 9 if car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 10 mqc car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 11 mqc car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 12 mqc car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 13 aggregative car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 14 aggregative car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 15 aggregative car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 16 hierarchy car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 17 hierarchy car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 18 hierarchy car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 19 lower limit of cir The lower limit value of committed information rate(integer). 20 upper limit of cir The upper limit value of committed information rate(integer). 21 cir granularity The value of committed information rate granularity(integer). 22 lower limit of pir The lower limit value of peak information rate(integer). 23 upper limit of pir The upper limit value of peak information rate(integer). 24 pir granularity The value of peak information rate granularity(integer). 25 lower limit of burst size The lower limit value of burst size(integer). 26 upper limit of burst size The upper limit value of burst size(integer). 27 burst size granularity The value of burst size granularity(integer). 28 default burst size The default value of burst size(integer). 29 lower limit of excess burst size The lower limit value of excess burst size(integer). 30 upper limit of excess burst size The upper limit value of excess burst size(integer). 31 excess burst size granularity The value of excess burst size granularity(integer). 32 default excess burst size The default value of excess burst size(integer). 33 green packet statistics If one of the last 2 bits of this object is set to 1, it indicates that counting of green packets is supported. bit 0 stands for counting by packet. bit 1 stands for counting by byte. 34 red packet statistics If one of the last 2 bits of this object is set to 1, it indicates that counting of red packets is supported. bit 0 stands for counting by packet. bit 1 stands for counting by byte. 35 yellow packet statistics If one of the last 2 bits of this object is set to 1, it indicates that counting of yellow packets is supported. bit 0 stands for counting by packet. bit 1 stands for counting by byte. 36 if car direction If one of the last 2 bits of this object is set to 1, it indicates that the direction type is supported. bit 0 stands for inbound, bit 1 stands for outbound. 37 if car match type If one of the last 4 bits of this object is set to 1, it indicates that the match type is supported. bit 0 stands for matching any packets, bit 1 stands for matching IPv4 ACL, bit 2 stands for matching IPv6 ACL, bit 3 stands for matching CAR list. 38 if car match ACL type If one of the last 6 bits of this object is set to 1, it indicates that ACL types are supported. bit 0 stands for matching IPv4 basic ACL, bit 1 stands for matching IPv4 advance ACL, bit 2 stands for matching MAC ACL, bit 3 stands for matching user ACL, bit 4 stands for matching IPv6 basic ACL, bit 5 stands for matching IPv6 advance ACL. 39 if car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 40 if car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 41 if car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 42 car list 1, if supported. 43 car list MPLS-EXP 1, if supported. 44 car list min IP mask length The minimum length of IP mask (integer). 45 car logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. gts module: Index Characteristic Value 1 gts function 1, if supported. 2 if gts If one of the last 4 bits of this object is set to 1, it indicates that the GTS on interface is supported, bit 0 stands for matching any, bit 1 stands for matching IPv4 ACL, bit 2 stands for matching IPv6 ACL, bit 3 stands for matching queue. 3 if gts token If one of the last 3 bits of this object is set to 1, it indicates that the interface GTS token is supported, bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 4 if gts queue length 1, if supported. 5 if gts match acl type If one of the last 6 bits of this object is set to 1, it indicates that ACL types are supported, bit 0 stands for IPv4 basic ACL, bit 1 stands for IPv4 advanced ACL, bit 2 stands for MAC ACL, bit 3 stands for user ACL, bit 4 stands for IPv6 basic ACL, bit 5 stands for IPv6 advanced ACL. 6 if gts queue number The queue number of GTS(integer). 7 mqc gts If one of the last 2 bits of this object is set to 1, it indicates that GTS configuration for behavior is supported. bit 0 stands for absolute GTS, bit 1 stands for percent GTS. 8 mqc gts token If one of the last 3 bits of this object is set to 1, it indicates that the behavior GTS token is supported, bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 9 mqc gts queue length 1, if supported. 10 lower limit of cir The lower limit value of committed information rate(integer). 11 upper limit of cir The upper limit value of committed information rate(integer). 12 cir granularity The value of committed information rate granularity(integer). 13 lower limit of pir The lower limit value of peak information rate(integer). 14 upper limit of pir The upper limit value of peak information rate(integer). 15 pir granularity The value of peak information rate granularity(integer). 16 lower limit of burst size The lower limit value of burst size(integer). 17 upper limit of burst size The upper limit value of burst size(integer). 18 burst size granularity The value of burst size granularity(integer). 19 lower limit of excess burst size The lower limit value of excess burst size(integer). 20 upper limit of excess burst size The upper limit value of excess burst size(integer). 21 excess burst size granularity The value of excess burst size granularity(integer). 22 lower limit of queue length The lower limit value of queue length(integer). 23 upper limit of queue length The upper limit value of queue length(integer). 24 default queue length The default length of queue(integer). 25 transmission statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of transmission traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 26 delay statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of delay traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 27 drop statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of drop traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 28 logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. lr module: Index Characteristic Value 1 lr function 1, if supported. 2 lr token If one of the last 3 bits of this object is set to 1, it indicates that the rate limit token is supported, bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 3 lr direction If one of the last 5 bits of this object is set to 1, it indicates that the direction type is supported, bit 0 stands for inbound direction, bit 1 stands for outbound direction. bit 2 stands for pw inbound direction, bit 3 stands for pw outbound direction. bit 4 stands for blade. 4 transmission statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of transmission traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 5 delay statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of delay traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 6 drop statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of drop traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 7 lr logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. hardware queue module: Index Characteristic Value 1 hardware queue management function 1, if supported. 2 sp port type If one of the last 8 bits of this object is set to 1, it indicates that the SP on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 3 wrr port type If one of the last 8 bits of this object is set to 1, it indicates that the WRR on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 4 wfq port type If one of the last 8 bits of this object is set to 1, it indicates that the WFQ on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 5 wrr max group id The max group ID of WRR. If it is not set to 0, it indicates that WRR group is supported(integer). 6 wrr unit If one of the last 4 bits of this object is set to 1, it indicates that the WRR unit type is supported, bit 0 stands for weight, bit 1 stands for byte count, bit 2 stands for bandwidth, bit 3 stands for percent. 7 lower limit of wrr weight The lower limit value of WRR weight (integer). 8 upper limit of wrr weight The upper limit value of WRR weight (integer). 9 lower limit of wrr byte The lower limit value of WRR byte (integer). 10 upper limit of wrr byte The upper limit value of WRR byte (integer). 11 wfq max group id The max group ID of WFQ. If it is not set to 0, it indicates that WFQ group is supported(integer). 12 wfq unit If one of the last 4 bits of this object is set to 1, it indicates that the WFQ unit type is supported, bit 0 stands for weight, bit 1 stands for byte count, bit 2 stands for bandwidth, bit 3 stands for percent. 13 lower limit of wfq weight The lower limit value of WFQ weight (integer). 14 upper limit of wfq weight The upper limit value of WFQ weight (integer). 15 lower limit of wfq byte The lower limit value of WFQ byte (integer). 16 upper limit of wfq byte The upper limit value of WFQ byte (integer). 17 lower limit of bandwidth The lower limit value of bandwidth(integer). 18 profile port type If one of the last 8 bits of this object is set to 1, it indicates that the HQ profile on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 19 profile queue mode If one of the last 3 bits of this object is set to 1, it indicates that the HQ profile mode is supported, bit 0 stands for SP, bit 1 stands for WRR, bit 2 stands for WFQ. 20 profile default queue mode If one of the last 3 bits of this object is set to 1, it indicates that the HQ profile default mode is supported, bit 0 stands for SP, bit 1 stands for WRR, bit 2 stands for WFQ. 21 profile max queue number The max number of profile queue(integer). 22 profile max wrr group id The max value of profile WRR group ID. If it is not set to 0, it indicates that profile WRR group is supported(integer). 23 lower limit of profile wrr weight The lower limit value of profile WRR weight(integer). 24 upper limit of profile wrr weight The upper limit value of profile WRR weight(integer). 25 lower limit of profile wfq weight The lower limit value of profile WFQ weight(integer). 26 upper limit of profile wfq weight The upper limit value of profile WFQ weight(integer). 27 low latency 1, if supported. 28 sub interface 1, if supported. software queue module: Index Characteristic Value 1 software queue function 1, if supported. 2 software queue type If one of the last 4 bits of this object is set to 1, it indicates that the software queue is supported, bit 0 stands for FIFO, bit 1 stands for WFQ, bit 2 stands for CBQ, bit 3 stands for RTPQ. 3 wfq default queue number The default number of WFQ queues(integer). 4 wfq max queue number The max number of WFQ queues(integer). 5 classifier-behavior wfq If one of the last 4 bits of this object is set to 1, it indicates that the cbwfq is supported, bit 0 stands for WFQ, bit 1 stands for QUEUE-NUMBER, bit 2 stands for QUEUE-LENGTH, bit 3 stands for SP. 6 classifier-behavior queue PCT 1, if supported. 7 min CBS ratio The min ratio of burst size(integer). 8 max CBS ratio The max ratio of burst size(integer). 9 classifier-behavior queue PIR 1, if supported. 10 queue max length The max length of queue(integer). 11 queue min bandwidth The min bandwidth of queue(integer). 12 queue max bandwidth The max bandwidth of queue(integer). 13 queue min CBS The min burst size of queue(integer). 14 queue max CBS The max burst size of queue(integer). 15 queue min PIR The min peak information rate of queue(integer). 16 queue max PIR The max peak information rate of queue(integer). 17 queue resequencing 1, if supported. 18 QM token 1, if supported. 19 preclassify 1, if supported. 20 predrop 1, if supported. 21 layer 2 ethernet interface 1, if supported. 22 remain assured forwarding 1, if supported. 23 software queue logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. wred module: Index Characteristic Value 1 wred function 1, if supported. 2 wred if type If one of the last 2 bits of this object is set to 1, it indicates that the WRED on interface is supported, bit 0 stands for Layer 2 interface, bit 1 stands for Layer 3 interface. 3 table if type If one of the last 2 bits of this object is set to 1, it indicates that the table on interface is supported, bit 0 stands for Layer 2 interface, bit 1 stands for Layer 3 interface. 4 table type If one of the last 3 bits of this object is set to 1, it indicates that the WRED table is supported, bit 0 stands for queue based table, bit 1 stands for IP precedence based table, bit 2 stands for DSCP based table. 5 drop level If one of the last 3 bits of this object is set to 1, it indicates that the WRED drop level is supported, bit 0 stands for green, bit 1 stands for yellow, bit 2 stands for red. 6 queue number The queue number of WRED table(integer). 7 lower limit of min threshold The lower limit value of min threshold(integer). 8 upper limit of min threshold The upper limit value of min threshold(integer) 9 lower limit of max threshold The lower limit value of max threshold(integer). 10 upper limit of max threshold The upper limit value of max threshold(integer) 11 min exponent The min value of exponent(integer). 12 max exponent The max value of exponent(integer). 13 lower limit of discard prob The lower limit value of mark probability denominator(integer). 14 upper limit of discard prob The upper limit value of mark probability denominator(integer). 15 ECN(explicit congestion notification) 1, if supported. 16 default table 1, if supported. 17 mqc wred 1, if supported. priority mapping table module: Index Characteristic Value 1 priority map table function 1, if supported. 2 802.1p map to lp If one of the last 3 bits of this object is set to 1, it indicates that this map type is supported, bit 0 stands for no direction, bit 1 stands for inbound, bit 2 stands for outbound. 3 802.1p map to dp Same as 802.1p map to lp. 4 exp map to lp Same as 802.1p map to lp. 5 dscp map to lp Same as 802.1p map to lp. 6 exp map to dp Same as 802.1p map to lp. 7 dscp map to dp Same as 802.1p map to lp. 8 dscp map to 802.1p Same as 802.1p map to lp. 9 802.1p map to dscp Same as 802.1p map to lp. 10 dscp map to dscp Same as 802.1p map to lp. 11 dscp map to exp Same as 802.1p map to lp. 12 exp map to dscp Same as 802.1p map to lp. 13 exp map to 802.1p Same as 802.1p map to lp. 14 exp map to exp Same as 802.1p map to lp. 15 lp map to 802.1p Same as 802.1p map to lp. 16 802.1p map to rpr Same as 802.1p map to lp. 17 dscp map to rpr Same as 802.1p map to lp. 18 exp map to rpr Same as 802.1p map to lp. 19 IP precedence map to rpr Same as 802.1p map to lp. 20 up map to dot1p Same as 802.1p map to lp. 21 up map to dscp Same as 802.1p map to lp. 22 up map to exp Same as 802.1p map to lp. 23 up map to dp Same as 802.1p map to lp. 24 up map to lp Same as 802.1p map to lp. 25 up map to rpr Same as 802.1p map to lp. 26 up map to fc Same as 802.1p map to lp. 27 lp map to dscp Same as 802.1p map to lp. 28 dot11e map to lp Same as 802.1p map to lp. 29 lp map to dot11e Same as 802.1p map to lp. 30 lp map to lp Same as 802.1p map to lp. 31 dot1p map to exp Same as 802.1p map to lp. 32 lp map to exp Same as 802.1p map to lp. 33 lp map to dp Same as 802.1p map to lp. 34 up map to up Same as 802.1p map to lp. 35 dot1p map to dot1p Same as 802.1p map to lp. 36 802.1p color map to lp If one of the last 6 bits of this object is set to 1, it indicates that this map type is supported, bit 0 stands for no direction, bit 1 stands for inbound, bit 2 stands for outbound, bit 3 stands for color green, bit 4 stands for color yellow, bit 5 stands for color red. 37 802.1p color map to dp Same as 802.1p color map to lp. 38 exp color map to lp Same as 802.1p color map to lp. 39 dscp color map to lp Same as 802.1p color map to lp. 40 exp color map to dp Same as 802.1p color map to lp. 41 dscp color map to dp Same as 802.1p color map to lp. 42 dscp color map to 802.1p Same as 802.1p color map to lp. 43 802.1p color map to dscp Same as 802.1p color map to lp. 44 dscp color map to dscp Same as 802.1p color map to lp. 45 dscp color map to exp Same as 802.1p color map to lp. 46 exp color map to dscp Same as 802.1p color map to lp. 47 exp color map to 802.1p Same as 802.1p color map to lp. 48 exp color map to exp Same as 802.1p color map to lp. 49 lp color map to 802.1p Same as 802.1p color map to lp. 50 802.1p color map to rpr Same as 802.1p color map to lp. 51 dscp color map to rpr Same as 802.1p color map to lp. 52 exp color map to rpr Same as 802.1p color map to lp. 53 IP precedence color map to rpr Same as 802.1p color map to lp. 54 up color map to dot1p Same as 802.1p color map to lp. 55 up color map to dscp Same as 802.1p color map to lp. 56 up color map to exp Same as 802.1p color map to lp. 57 up color map to dp Same as 802.1p color map to lp. 58 up color map to lp Same as 802.1p color map to lp. 59 up color map to rpr Same as 802.1p color map to lp. 60 up color map to fc Same as 802.1p color map to lp. 61 lp color map to dscp Same as 802.1p color map to lp. 62 dot11e color map to lp Same as 802.1p color map to lp. 63 lp color map to dot11e Same as 802.1p color map to lp. 64 lp color map to lp Same as 802.1p color map to lp. 65 dot1p color map to exp Same as 802.1p color map to lp. 66 lp color map to exp Same as 802.1p color map to lp. 67 lp color map to dp Same as 802.1p color map to lp. 68 up color map to up Same as 802.1p color map to lp. 69 dot1p color map to dot1p Same as 802.1p color map to lp. 70 up to fc export number The export fc number of up map to fc table. 71 behavior map type If one of the last 3 bits of this object is set to 1, it indicates that the pre-primap table for behavior is supported, bit 0 stands for pre-map, bit 1 stands for colored pre-map, bit 2 stands for color-dp. 72 behavior table type 0, if no map table or colored map table is supported, 1, if all map table and colored map table are supported, 2, if only specified colored map table are supported, and the specified colored map table are {dot1p-dot1p, dot1p-dp, dot1p-dscp, dot1p-exp, dot1p-lp, dscp-dot1p, dscp-dp, dscp-dscp, dscp-exp, dscp-lp, exp-dot1p, exp-dp, exp-dscp, exp-exp, exp-lp}. port priority module: Index Characteristic Value 1 port priority function 1, if supported. 2 port priority type If one of the last 6 bits of this object is set to 1, it indicates that the port priority type is supported, bit 0 stands for default, bit 1 stands for dot1p, bit 2 stands for DP, bit 3 stands for DSCP, bit 4 stands for EXP, bit 5 stands for LP. 3 priority trust mode If one of the last 7 bits of this object is set to 1, it indicates that the trust mode is supported, bit 0 stands for untrust, bit 1 stands for dot1p, bit 2 stands for DSCP, bit 3 stands for EXP, bit 4 stands for IP precedence, bit 5 stands for dot11e, bit 6 stands for auto. 4 override 1, if supported. 5 port priority iftype If one of the last 10 bits of this object is set to 1, it indicates that the trust mode is supported, bit 0 stands for l2eth, bit 1 stands for l3eth, bit 2 stands for pos, bit 3 stands for atm, bit 4 stands for serial, bit 5 stands for mp, bit 6 stands for mrf, bit 7 stands for rpr, bit 8 stands for ids, bit 9 stands for fc. redirect&mirror module: Index Characteristic Value 1 redirect and mirror function 1, if supported. 2 redirect to CPU 1, if supported. 3 redirect and set vlan 1, if supported. 4 redirect interface type If one of the last 15 bits of this object is set to 1, it indicates that the redirect interface type is supported, bit 0 stands for L2Eth, bit 1 stands for L2GE, bit 2 stands for L2XGE, bit 3 stands for L2FGE, bit 4 stands for L2HGE, bit 5 stands for L3Eth, bit 6 stands for L3GE, bit 7 stands for L3XGE, bit 8 stands for L3FGE, bit 9 stands for L3HGE, bit 10 stands for tunnel, bit 11 stands for RAGG, bit 12 stands for BAGG, bit 13 stands for L2TGE, bit 14 stands for L3TGE. 5 mirror to CPU 1, if supported. 6 mirror to vlan 1, if supported. 7 mirror to slave interface 1, if supported. 8 mirror interface type If one of the last 15 bits of this object is set to 1, it indicates that the mirror interface type is supported, bit 0 stands for L2Eth, bit 1 stands for L2GE, bit 2 stands for L2XGE, bit 3 stands for L2FGE, bit 4 stands for L2HGE, bit 5 stands for L3Eth, bit 6 stands for L3GE, bit 7 stands for L3XGE, bit 8 stands for L3FGE, bit 9 stands for L3HGE, bit 10 stands for tunnel, bit 11 stands for RAGG, bit 12 stands for BAGG, bit 13 stands for L2TGE, bit 14 stands for L3TGE. 9 track OAP 1, if supported. mqc module: Index Characteristic Value 1 qos policy function 1, if supported. 2 interface policy If one of the last 2 bits of this object is set to 1, it indicates that the interface policy is supported, bit 0 stands for inbound, bit 1 stands for outbound. 3 global policy If one of the last 2 bits of this object is set to 1, it indicates that the global policy is supported, bit 0 stands for inbound, bit 1 stands for outbound. 4 vlan policy If one of the last 2 bits of this object is set to 1, it indicates that the VLAN policy is supported, bit 0 stands for inbound, bit 1 stands for outbound. 5 copp policy If one of the last 3 bits of this object is set to 1, it indicates that the COPP policy is supported, bit 0 stands for inbound, bit 1 stands for outbound, bit 2 stands for coppmp inbound. 6 interface type If one of the last 8 bits of this object is set to 1, it indicates that the interface type is supported, bit 0 stands for VT(Virtual-Template), bit 1 stands for tunnel, bit 2 stands for VLAN, bit 3 stands for RAGG, bit 4 stands for BAGG, bit 5 stands for dialer, bit 6 stands for VPPP, bit 7 stands for VSI. 7 system predefined 1, if supported. 8 rate statistics 1, if supported. 9 min interval The min interval of rate statistics (integer). 10 max interval The max interval of rate statistics (integer). 11 match not 1, if supported. 12 match any 1, if supported. 13 match acl If one of the last 6 bits of this object is set to 1, it indicates that the ACL type is supported, bit 0 stands for IPv4 basic ACL, bit 1 stands for IPv4 advanced ACL, bit 2 stands for MAC ACL, bit 3 stands for user ACL, bit 4 stands for IPv6 basic ACL, bit 5 stands for IPv6 advanced ACL. 14 match mac 1, if supported. 15 match customer vlan ID If one of the last 2 bits of this object is set to 1, it indicates that the match type is supported, bit 0 stands for customer VLAN ID list, bit 1 stands for customer VLAN ID range. 16 match service vlan ID If one of the last 2 bits of this object is set to 1, it indicates that the match type is supported, bit 0 stands for service VLAN ID list, bit 1 stands for service VLAN ID range. 17 match customer dot1p 1, if supported. 18 match service dot1p 1, if supported. 19 match dscp 1, if supported. 20 match ip precedence 1, if supported. 21 match protocol If one of the last 4 bits of this object is set to 1, it indicates that the protocol type is supported, bit 0 stands for IPv4 protocol, bit 1 stands for IPv6 protocol, bit 2 stands for bittorrent protocol, bit 3 stands for ARP protocol. 22 match qos local ID 1, if supported. 23 match copp protocol 1, if supported. 24 match copp group If one of the last 7 bits of this object is set to 1, it indicates that the COPP group type is supported, bit 0 stands for critical group, bit 1 stands for important group, bit 2 stands for management group, bit 3 stands for normal group, bit 4 stands for redirect group, bit 5 stands for monitor group, bit 6 stands for exception group. 25 match mpls label 1, if supported. 26 match second mpls label 1, if supported. 27 match mpls exp 1, if supported. 28 match second mpls exp 1, if supported. 29 match forwarding layer If one of the last 2 bits of this object is set to 1, it indicates that the forwarding layer is supported, bit 0 stands for bridge, bit 1 stands for route. 30 match input interface 1, if supported. 31 match classifier 1, if supported. 32 match RTP protocol 1, if supported. 33 match packet length 1, if supported. 34 match drop priority 1, if supported. 35 match local precedence 1, if supported. 36 match app-group 1, if supported. 37 account action If it is not set to 0, it indicates that accounting action is supported. 1, if accounting by default method is supported, 2, if accounting by one method of packet and byte is supported, 3, if accounting by neither method or one of packet and byte is supported, 4, if accounting by neither method or one or two of packet and byte is supported. 38 filter action 1, if supported. 39 nest topmost vlan tag If one of the last 2 bits of this object is set to 1, it indicates that the nest action is supported, bit 0 stands for nest VLAN ID, bit 1 stands for nest VLAN ID and COS. 40 remark action If one of the last 15 bits of this object is set to 1, it indicates that the remark action is supported, bit 0 stands for DSCP, bit 1 stands for IP precedence, bit 2 stands for MPLS-EXP, bit 3 stands for dot1p, bit 4 stands for QoS local ID, bit 5 stands for local precedence, bit 6 stands for drop precedence, bit 7 stands for customer VLAN ID, bit 8 stands for service VLAN ID, bit 9 stands for customer dot1p trust, bit 10 stands for imposition MPLS-EXP, bit 11 stands for fc, bit 12 stands for atm clp, bit 13 stands for fr de, bit 14 stands for account level. 41 green packets remark action If one of the last 10 bits of this object is set to 1, it indicates that the green packets remark action is supported and the mask is the same as that for remark action. 42 yellow remark action If one of the last 10 bits of this object is set to 1, it indicates that the yellow packets remark action is supported and the mask is the same as that for remark action. 43 red remark action If one of the last 10 bits of this object is set to 1, it indicates that the red packets remark action is supported and the mask is the same as that for remark action. 44 nest policy action 1, if supported. 45 classifier-behavior mode type If one of the last 5 bits of this object is set to 1, it indicates that the classifier-behavior mode type is supported, bit 0 stands for dot1q-tag-manipulation mode, bit 1 stands for QPPB mode, bit 2 stands for IP-source-guard mode, bit 3 stands for voice-VLAN mode, bit 4 stands for DCBX mode. 46 classifier-behavior statistics unit If one of the last 2 bits of this object is set to 1, it indicates that the classifier-behavior statistics unit is supported, bit 0 stands for packet, bit 1 stands for byte. queue statistic module: Index Characteristic Value 1 queue statistic function 1, if supported. 2 TC counter 1, if supported. 3 port queue statistic 1, if supported. 4 queue global function 1, if supported. 5 TC parameter If one of the last 4 bits of this object is set to 1, it indicates that the TC parameter is supported, bit 0 stands for interface, bit 1 stands for VLAN, bit 2 stands for local precedence, bit 3 stands for drop precedence. \"",
"::=",
"{",
"fsQoSSysCapabilityEntry",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The system capability characteristics value of modules of QoS. car module: Index Characteristic Value 1 car function 1, if supported. 2 global car If one of the last 3 bits of this object is set to 1, it indicates that global CAR is supported. bit 0 stands for aggregative CAR, bit 1 stands for hierarchy CAR, bit 2 stands for common global CAR. 3 mqc car 1, if supported. 4 mqc global car bit 0 stands for application of aggregative CAR by MQC, bit 1 stands for application of hierarchy CAR by MQC. 5 if car If one of the last 2 bits of this object is set to 1, it indicates that interface CAR is supported. bit 0 stands for normal CAR on interface, bit 1 stands for application of aggregative CAR on interface. 6 mqc car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 7 aggregative car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 8 hierarchy car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 9 if car token If one of the last 3 bits of this object is set to 1, it indicates that 3 token parameters are all supported. bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 10 mqc car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 11 mqc car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 12 mqc car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 13 aggregative car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 14 aggregative car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 15 aggregative car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 16 hierarchy car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 17 hierarchy car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 18 hierarchy car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 19 lower limit of cir The lower limit value of committed information rate(integer). 20 upper limit of cir The upper limit value of committed information rate(integer). 21 cir granularity The value of committed information rate granularity(integer). 22 lower limit of pir The lower limit value of peak information rate(integer). 23 upper limit of pir The upper limit value of peak information rate(integer). 24 pir granularity The value of peak information rate granularity(integer). 25 lower limit of burst size The lower limit value of burst size(integer). 26 upper limit of burst size The upper limit value of burst size(integer). 27 burst size granularity The value of burst size granularity(integer). 28 default burst size The default value of burst size(integer). 29 lower limit of excess burst size The lower limit value of excess burst size(integer). 30 upper limit of excess burst size The upper limit value of excess burst size(integer). 31 excess burst size granularity The value of excess burst size granularity(integer). 32 default excess burst size The default value of excess burst size(integer). 33 green packet statistics If one of the last 2 bits of this object is set to 1, it indicates that counting of green packets is supported. bit 0 stands for counting by packet. bit 1 stands for counting by byte. 34 red packet statistics If one of the last 2 bits of this object is set to 1, it indicates that counting of red packets is supported. bit 0 stands for counting by packet. bit 1 stands for counting by byte. 35 yellow packet statistics If one of the last 2 bits of this object is set to 1, it indicates that counting of yellow packets is supported. bit 0 stands for counting by packet. bit 1 stands for counting by byte. 36 if car direction If one of the last 2 bits of this object is set to 1, it indicates that the direction type is supported. bit 0 stands for inbound, bit 1 stands for outbound. 37 if car match type If one of the last 4 bits of this object is set to 1, it indicates that the match type is supported. bit 0 stands for matching any packets, bit 1 stands for matching IPv4 ACL, bit 2 stands for matching IPv6 ACL, bit 3 stands for matching CAR list. 38 if car match ACL type If one of the last 6 bits of this object is set to 1, it indicates that ACL types are supported. bit 0 stands for matching IPv4 basic ACL, bit 1 stands for matching IPv4 advance ACL, bit 2 stands for matching MAC ACL, bit 3 stands for matching user ACL, bit 4 stands for matching IPv6 basic ACL, bit 5 stands for matching IPv6 advance ACL. 39 if car green action If one of the last 10 bits of this object is set to 1, it indicates that green action is supported. bit 0 stands for continuing, bit 1 stands for dropping, bit 2 stands for transmitting, bit 3 stands for remarking IP precedence, bit 4 stands for remarking DSCP, bit 5 stands for remarking MPLS-EXP, bit 6 stands for remarking CLP bit of ATM, bit 7 stands for remarking DE bit of FR, bit 8 stands for remarking 802.1p priority value, bit 9 stands for remarking local precedence. 40 if car yellow action If one of the last 10 bits of this object is set to 1, it indicates that yellow action is supported and the mask is the same as that for green action. 41 if car red action If one of the last 10 bits of this object is set to 1, it indicates that red action is supported and the mask is the same as that for green action. 42 car list 1, if supported. 43 car list MPLS-EXP 1, if supported. 44 car list min IP mask length The minimum length of IP mask (integer). 45 car logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. gts module: Index Characteristic Value 1 gts function 1, if supported. 2 if gts If one of the last 4 bits of this object is set to 1, it indicates that the GTS on interface is supported, bit 0 stands for matching any, bit 1 stands for matching IPv4 ACL, bit 2 stands for matching IPv6 ACL, bit 3 stands for matching queue. 3 if gts token If one of the last 3 bits of this object is set to 1, it indicates that the interface GTS token is supported, bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 4 if gts queue length 1, if supported. 5 if gts match acl type If one of the last 6 bits of this object is set to 1, it indicates that ACL types are supported, bit 0 stands for IPv4 basic ACL, bit 1 stands for IPv4 advanced ACL, bit 2 stands for MAC ACL, bit 3 stands for user ACL, bit 4 stands for IPv6 basic ACL, bit 5 stands for IPv6 advanced ACL. 6 if gts queue number The queue number of GTS(integer). 7 mqc gts If one of the last 2 bits of this object is set to 1, it indicates that GTS configuration for behavior is supported. bit 0 stands for absolute GTS, bit 1 stands for percent GTS. 8 mqc gts token If one of the last 3 bits of this object is set to 1, it indicates that the behavior GTS token is supported, bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 9 mqc gts queue length 1, if supported. 10 lower limit of cir The lower limit value of committed information rate(integer). 11 upper limit of cir The upper limit value of committed information rate(integer). 12 cir granularity The value of committed information rate granularity(integer). 13 lower limit of pir The lower limit value of peak information rate(integer). 14 upper limit of pir The upper limit value of peak information rate(integer). 15 pir granularity The value of peak information rate granularity(integer). 16 lower limit of burst size The lower limit value of burst size(integer). 17 upper limit of burst size The upper limit value of burst size(integer). 18 burst size granularity The value of burst size granularity(integer). 19 lower limit of excess burst size The lower limit value of excess burst size(integer). 20 upper limit of excess burst size The upper limit value of excess burst size(integer). 21 excess burst size granularity The value of excess burst size granularity(integer). 22 lower limit of queue length The lower limit value of queue length(integer). 23 upper limit of queue length The upper limit value of queue length(integer). 24 default queue length The default length of queue(integer). 25 transmission statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of transmission traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 26 delay statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of delay traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 27 drop statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of drop traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 28 logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. lr module: Index Characteristic Value 1 lr function 1, if supported. 2 lr token If one of the last 3 bits of this object is set to 1, it indicates that the rate limit token is supported, bit 0 stands for burst size, bit 1 stands for excess burst size, bit 2 stands for peak information rate. 3 lr direction If one of the last 5 bits of this object is set to 1, it indicates that the direction type is supported, bit 0 stands for inbound direction, bit 1 stands for outbound direction. bit 2 stands for pw inbound direction, bit 3 stands for pw outbound direction. bit 4 stands for blade. 4 transmission statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of transmission traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 5 delay statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of delay traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 6 drop statistics If one of the last 2 bits of this object is set to 1, it indicates that the counting of drop traffic is supported, bit 0 stands for counting by packet, bit 1 stands for counting by byte. 7 lr logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. hardware queue module: Index Characteristic Value 1 hardware queue management function 1, if supported. 2 sp port type If one of the last 8 bits of this object is set to 1, it indicates that the SP on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 3 wrr port type If one of the last 8 bits of this object is set to 1, it indicates that the WRR on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 4 wfq port type If one of the last 8 bits of this object is set to 1, it indicates that the WFQ on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 5 wrr max group id The max group ID of WRR. If it is not set to 0, it indicates that WRR group is supported(integer). 6 wrr unit If one of the last 4 bits of this object is set to 1, it indicates that the WRR unit type is supported, bit 0 stands for weight, bit 1 stands for byte count, bit 2 stands for bandwidth, bit 3 stands for percent. 7 lower limit of wrr weight The lower limit value of WRR weight (integer). 8 upper limit of wrr weight The upper limit value of WRR weight (integer). 9 lower limit of wrr byte The lower limit value of WRR byte (integer). 10 upper limit of wrr byte The upper limit value of WRR byte (integer). 11 wfq max group id The max group ID of WFQ. If it is not set to 0, it indicates that WFQ group is supported(integer). 12 wfq unit If one of the last 4 bits of this object is set to 1, it indicates that the WFQ unit type is supported, bit 0 stands for weight, bit 1 stands for byte count, bit 2 stands for bandwidth, bit 3 stands for percent. 13 lower limit of wfq weight The lower limit value of WFQ weight (integer). 14 upper limit of wfq weight The upper limit value of WFQ weight (integer). 15 lower limit of wfq byte The lower limit value of WFQ byte (integer). 16 upper limit of wfq byte The upper limit value of WFQ byte (integer). 17 lower limit of bandwidth The lower limit value of bandwidth(integer). 18 profile port type If one of the last 8 bits of this object is set to 1, it indicates that the HQ profile on port is supported, bit 0 stands for Layer 2 Ethernet port, bit 1 stands for Layer 3 Ethernet port, bit 2 stands for POS port, bit 3 stands for ATM port, bit 4 stands for serial port, bit 5 stands for mesh port, bit 6 stands for MFR port, bit 7 stands for RPR port. 19 profile queue mode If one of the last 3 bits of this object is set to 1, it indicates that the HQ profile mode is supported, bit 0 stands for SP, bit 1 stands for WRR, bit 2 stands for WFQ. 20 profile default queue mode If one of the last 3 bits of this object is set to 1, it indicates that the HQ profile default mode is supported, bit 0 stands for SP, bit 1 stands for WRR, bit 2 stands for WFQ. 21 profile max queue number The max number of profile queue(integer). 22 profile max wrr group id The max value of profile WRR group ID. If it is not set to 0, it indicates that profile WRR group is supported(integer). 23 lower limit of profile wrr weight The lower limit value of profile WRR weight(integer). 24 upper limit of profile wrr weight The upper limit value of profile WRR weight(integer). 25 lower limit of profile wfq weight The lower limit value of profile WFQ weight(integer). 26 upper limit of profile wfq weight The upper limit value of profile WFQ weight(integer). 27 low latency 1, if supported. 28 sub interface 1, if supported. software queue module: Index Characteristic Value 1 software queue function 1, if supported. 2 software queue type If one of the last 4 bits of this object is set to 1, it indicates that the software queue is supported, bit 0 stands for FIFO, bit 1 stands for WFQ, bit 2 stands for CBQ, bit 3 stands for RTPQ. 3 wfq default queue number The default number of WFQ queues(integer). 4 wfq max queue number The max number of WFQ queues(integer). 5 classifier-behavior wfq If one of the last 4 bits of this object is set to 1, it indicates that the cbwfq is supported, bit 0 stands for WFQ, bit 1 stands for QUEUE-NUMBER, bit 2 stands for QUEUE-LENGTH, bit 3 stands for SP. 6 classifier-behavior queue PCT 1, if supported. 7 min CBS ratio The min ratio of burst size(integer). 8 max CBS ratio The max ratio of burst size(integer). 9 classifier-behavior queue PIR 1, if supported. 10 queue max length The max length of queue(integer). 11 queue min bandwidth The min bandwidth of queue(integer). 12 queue max bandwidth The max bandwidth of queue(integer). 13 queue min CBS The min burst size of queue(integer). 14 queue max CBS The max burst size of queue(integer). 15 queue min PIR The min peak information rate of queue(integer). 16 queue max PIR The max peak information rate of queue(integer). 17 queue resequencing 1, if supported. 18 QM token 1, if supported. 19 preclassify 1, if supported. 20 predrop 1, if supported. 21 layer 2 ethernet interface 1, if supported. 22 remain assured forwarding 1, if supported. 23 software queue logic iftype If one of the last 6 bits of this object is set to 1, it indicates that the logic iftype is supported, bit 0 stands for matching vt, bit 1 stands for matching tunnel, bit 2 stands for matching vlan, bit 3 stands for matching ragg, bit 4 stands for matching bagg, bit 5 stands for matching dialer. wred module: Index Characteristic Value 1 wred function 1, if supported. 2 wred if type If one of the last 2 bits of this object is set to 1, it indicates that the WRED on interface is supported, bit 0 stands for Layer 2 interface, bit 1 stands for Layer 3 interface. 3 table if type If one of the last 2 bits of this object is set to 1, it indicates that the table on interface is supported, bit 0 stands for Layer 2 interface, bit 1 stands for Layer 3 interface. 4 table type If one of the last 3 bits of this object is set to 1, it indicates that the WRED table is supported, bit 0 stands for queue based table, bit 1 stands for IP precedence based table, bit 2 stands for DSCP based table. 5 drop level If one of the last 3 bits of this object is set to 1, it indicates that the WRED drop level is supported, bit 0 stands for green, bit 1 stands for yellow, bit 2 stands for red. 6 queue number The queue number of WRED table(integer). 7 lower limit of min threshold The lower limit value of min threshold(integer). 8 upper limit of min threshold The upper limit value of min threshold(integer) 9 lower limit of max threshold The lower limit value of max threshold(integer). 10 upper limit of max threshold The upper limit value of max threshold(integer) 11 min exponent The min value of exponent(integer). 12 max exponent The max value of exponent(integer). 13 lower limit of discard prob The lower limit value of mark probability denominator(integer). 14 upper limit of discard prob The upper limit value of mark probability denominator(integer). 15 ECN(explicit congestion notification) 1, if supported. 16 default table 1, if supported. 17 mqc wred 1, if supported. priority mapping table module: Index Characteristic Value 1 priority map table function 1, if supported. 2 802.1p map to lp If one of the last 3 bits of this object is set to 1, it indicates that this map type is supported, bit 0 stands for no direction, bit 1 stands for inbound, bit 2 stands for outbound. 3 802.1p map to dp Same as 802.1p map to lp. 4 exp map to lp Same as 802.1p map to lp. 5 dscp map to lp Same as 802.1p map to lp. 6 exp map to dp Same as 802.1p map to lp. 7 dscp map to dp Same as 802.1p map to lp. 8 dscp map to 802.1p Same as 802.1p map to lp. 9 802.1p map to dscp Same as 802.1p map to lp. 10 dscp map to dscp Same as 802.1p map to lp. 11 dscp map to exp Same as 802.1p map to lp. 12 exp map to dscp Same as 802.1p map to lp. 13 exp map to 802.1p Same as 802.1p map to lp. 14 exp map to exp Same as 802.1p map to lp. 15 lp map to 802.1p Same as 802.1p map to lp. 16 802.1p map to rpr Same as 802.1p map to lp. 17 dscp map to rpr Same as 802.1p map to lp. 18 exp map to rpr Same as 802.1p map to lp. 19 IP precedence map to rpr Same as 802.1p map to lp. 20 up map to dot1p Same as 802.1p map to lp. 21 up map to dscp Same as 802.1p map to lp. 22 up map to exp Same as 802.1p map to lp. 23 up map to dp Same as 802.1p map to lp. 24 up map to lp Same as 802.1p map to lp. 25 up map to rpr Same as 802.1p map to lp. 26 up map to fc Same as 802.1p map to lp. 27 lp map to dscp Same as 802.1p map to lp. 28 dot11e map to lp Same as 802.1p map to lp. 29 lp map to dot11e Same as 802.1p map to lp. 30 lp map to lp Same as 802.1p map to lp. 31 dot1p map to exp Same as 802.1p map to lp. 32 lp map to exp Same as 802.1p map to lp. 33 lp map to dp Same as 802.1p map to lp. 34 up map to up Same as 802.1p map to lp. 35 dot1p map to dot1p Same as 802.1p map to lp. 36 802.1p color map to lp If one of the last 6 bits of this object is set to 1, it indicates that this map type is supported, bit 0 stands for no direction, bit 1 stands for inbound, bit 2 stands for outbound, bit 3 stands for color green, bit 4 stands for color yellow, bit 5 stands for color red. 37 802.1p color map to dp Same as 802.1p color map to lp. 38 exp color map to lp Same as 802.1p color map to lp. 39 dscp color map to lp Same as 802.1p color map to lp. 40 exp color map to dp Same as 802.1p color map to lp. 41 dscp color map to dp Same as 802.1p color map to lp. 42 dscp color map to 802.1p Same as 802.1p color map to lp. 43 802.1p color map to dscp Same as 802.1p color map to lp. 44 dscp color map to dscp Same as 802.1p color map to lp. 45 dscp color map to exp Same as 802.1p color map to lp. 46 exp color map to dscp Same as 802.1p color map to lp. 47 exp color map to 802.1p Same as 802.1p color map to lp. 48 exp color map to exp Same as 802.1p color map to lp. 49 lp color map to 802.1p Same as 802.1p color map to lp. 50 802.1p color map to rpr Same as 802.1p color map to lp. 51 dscp color map to rpr Same as 802.1p color map to lp. 52 exp color map to rpr Same as 802.1p color map to lp. 53 IP precedence color map to rpr Same as 802.1p color map to lp. 54 up color map to dot1p Same as 802.1p color map to lp. 55 up color map to dscp Same as 802.1p color map to lp. 56 up color map to exp Same as 802.1p color map to lp. 57 up color map to dp Same as 802.1p color map to lp. 58 up color map to lp Same as 802.1p color map to lp. 59 up color map to rpr Same as 802.1p color map to lp. 60 up color map to fc Same as 802.1p color map to lp. 61 lp color map to dscp Same as 802.1p color map to lp. 62 dot11e color map to lp Same as 802.1p color map to lp. 63 lp color map to dot11e Same as 802.1p color map to lp. 64 lp color map to lp Same as 802.1p color map to lp. 65 dot1p color map to exp Same as 802.1p color map to lp. 66 lp color map to exp Same as 802.1p color map to lp. 67 lp color map to dp Same as 802.1p color map to lp. 68 up color map to up Same as 802.1p color map to lp. 69 dot1p color map to dot1p Same as 802.1p color map to lp. 70 up to fc export number The export fc number of up map to fc table. 71 behavior map type If one of the last 3 bits of this object is set to 1, it indicates that the pre-primap table for behavior is supported, bit 0 stands for pre-map, bit 1 stands for colored pre-map, bit 2 stands for color-dp. 72 behavior table type 0, if no map table or colored map table is supported, 1, if all map table and colored map table are supported, 2, if only specified colored map table are supported, and the specified colored map table are {dot1p-dot1p, dot1p-dp, dot1p-dscp, dot1p-exp, dot1p-lp, dscp-dot1p, dscp-dp, dscp-dscp, dscp-exp, dscp-lp, exp-dot1p, exp-dp, exp-dscp, exp-exp, exp-lp}. port priority module: Index Characteristic Value 1 port priority function 1, if supported. 2 port priority type If one of the last 6 bits of this object is set to 1, it indicates that the port priority type is supported, bit 0 stands for default, bit 1 stands for dot1p, bit 2 stands for DP, bit 3 stands for DSCP, bit 4 stands for EXP, bit 5 stands for LP. 3 priority trust mode If one of the last 7 bits of this object is set to 1, it indicates that the trust mode is supported, bit 0 stands for untrust, bit 1 stands for dot1p, bit 2 stands for DSCP, bit 3 stands for EXP, bit 4 stands for IP precedence, bit 5 stands for dot11e, bit 6 stands for auto. 4 override 1, if supported. 5 port priority iftype If one of the last 10 bits of this object is set to 1, it indicates that the trust mode is supported, bit 0 stands for l2eth, bit 1 stands for l3eth, bit 2 stands for pos, bit 3 stands for atm, bit 4 stands for serial, bit 5 stands for mp, bit 6 stands for mrf, bit 7 stands for rpr, bit 8 stands for ids, bit 9 stands for fc. redirect&mirror module: Index Characteristic Value 1 redirect and mirror function 1, if supported. 2 redirect to CPU 1, if supported. 3 redirect and set vlan 1, if supported. 4 redirect interface type If one of the last 15 bits of this object is set to 1, it indicates that the redirect interface type is supported, bit 0 stands for L2Eth, bit 1 stands for L2GE, bit 2 stands for L2XGE, bit 3 stands for L2FGE, bit 4 stands for L2HGE, bit 5 stands for L3Eth, bit 6 stands for L3GE, bit 7 stands for L3XGE, bit 8 stands for L3FGE, bit 9 stands for L3HGE, bit 10 stands for tunnel, bit 11 stands for RAGG, bit 12 stands for BAGG, bit 13 stands for L2TGE, bit 14 stands for L3TGE. 5 mirror to CPU 1, if supported. 6 mirror to vlan 1, if supported. 7 mirror to slave interface 1, if supported. 8 mirror interface type If one of the last 15 bits of this object is set to 1, it indicates that the mirror interface type is supported, bit 0 stands for L2Eth, bit 1 stands for L2GE, bit 2 stands for L2XGE, bit 3 stands for L2FGE, bit 4 stands for L2HGE, bit 5 stands for L3Eth, bit 6 stands for L3GE, bit 7 stands for L3XGE, bit 8 stands for L3FGE, bit 9 stands for L3HGE, bit 10 stands for tunnel, bit 11 stands for RAGG, bit 12 stands for BAGG, bit 13 stands for L2TGE, bit 14 stands for L3TGE. 9 track OAP 1, if supported. mqc module: Index Characteristic Value 1 qos policy function 1, if supported. 2 interface policy If one of the last 2 bits of this object is set to 1, it indicates that the interface policy is supported, bit 0 stands for inbound, bit 1 stands for outbound. 3 global policy If one of the last 2 bits of this object is set to 1, it indicates that the global policy is supported, bit 0 stands for inbound, bit 1 stands for outbound. 4 vlan policy If one of the last 2 bits of this object is set to 1, it indicates that the VLAN policy is supported, bit 0 stands for inbound, bit 1 stands for outbound. 5 copp policy If one of the last 3 bits of this object is set to 1, it indicates that the COPP policy is supported, bit 0 stands for inbound, bit 1 stands for outbound, bit 2 stands for coppmp inbound. 6 interface type If one of the last 8 bits of this object is set to 1, it indicates that the interface type is supported, bit 0 stands for VT(Virtual-Template), bit 1 stands for tunnel, bit 2 stands for VLAN, bit 3 stands for RAGG, bit 4 stands for BAGG, bit 5 stands for dialer, bit 6 stands for VPPP, bit 7 stands for VSI. 7 system predefined 1, if supported. 8 rate statistics 1, if supported. 9 min interval The min interval of rate statistics (integer). 10 max interval The max interval of rate statistics (integer). 11 match not 1, if supported. 12 match any 1, if supported. 13 match acl If one of the last 6 bits of this object is set to 1, it indicates that the ACL type is supported, bit 0 stands for IPv4 basic ACL, bit 1 stands for IPv4 advanced ACL, bit 2 stands for MAC ACL, bit 3 stands for user ACL, bit 4 stands for IPv6 basic ACL, bit 5 stands for IPv6 advanced ACL. 14 match mac 1, if supported. 15 match customer vlan ID If one of the last 2 bits of this object is set to 1, it indicates that the match type is supported, bit 0 stands for customer VLAN ID list, bit 1 stands for customer VLAN ID range. 16 match service vlan ID If one of the last 2 bits of this object is set to 1, it indicates that the match type is supported, bit 0 stands for service VLAN ID list, bit 1 stands for service VLAN ID range. 17 match customer dot1p 1, if supported. 18 match service dot1p 1, if supported. 19 match dscp 1, if supported. 20 match ip precedence 1, if supported. 21 match protocol If one of the last 4 bits of this object is set to 1, it indicates that the protocol type is supported, bit 0 stands for IPv4 protocol, bit 1 stands for IPv6 protocol, bit 2 stands for bittorrent protocol, bit 3 stands for ARP protocol. 22 match qos local ID 1, if supported. 23 match copp protocol 1, if supported. 24 match copp group If one of the last 7 bits of this object is set to 1, it indicates that the COPP group type is supported, bit 0 stands for critical group, bit 1 stands for important group, bit 2 stands for management group, bit 3 stands for normal group, bit 4 stands for redirect group, bit 5 stands for monitor group, bit 6 stands for exception group. 25 match mpls label 1, if supported. 26 match second mpls label 1, if supported. 27 match mpls exp 1, if supported. 28 match second mpls exp 1, if supported. 29 match forwarding layer If one of the last 2 bits of this object is set to 1, it indicates that the forwarding layer is supported, bit 0 stands for bridge, bit 1 stands for route. 30 match input interface 1, if supported. 31 match classifier 1, if supported. 32 match RTP protocol 1, if supported. 33 match packet length 1, if supported. 34 match drop priority 1, if supported. 35 match local precedence 1, if supported. 36 match app-group 1, if supported. 37 account action If it is not set to 0, it indicates that accounting action is supported. 1, if accounting by default method is supported, 2, if accounting by one method of packet and byte is supported, 3, if accounting by neither method or one of packet and byte is supported, 4, if accounting by neither method or one or two of packet and byte is supported. 38 filter action 1, if supported. 39 nest topmost vlan tag If one of the last 2 bits of this object is set to 1, it indicates that the nest action is supported, bit 0 stands for nest VLAN ID, bit 1 stands for nest VLAN ID and COS. 40 remark action If one of the last 15 bits of this object is set to 1, it indicates that the remark action is supported, bit 0 stands for DSCP, bit 1 stands for IP precedence, bit 2 stands for MPLS-EXP, bit 3 stands for dot1p, bit 4 stands for QoS local ID, bit 5 stands for local precedence, bit 6 stands for drop precedence, bit 7 stands for customer VLAN ID, bit 8 stands for service VLAN ID, bit 9 stands for customer dot1p trust, bit 10 stands for imposition MPLS-EXP, bit 11 stands for fc, bit 12 stands for atm clp, bit 13 stands for fr de, bit 14 stands for account level. 41 green packets remark action If one of the last 10 bits of this object is set to 1, it indicates that the green packets remark action is supported and the mask is the same as that for remark action. 42 yellow remark action If one of the last 10 bits of this object is set to 1, it indicates that the yellow packets remark action is supported and the mask is the same as that for remark action. 43 red remark action If one of the last 10 bits of this object is set to 1, it indicates that the red packets remark action is supported and the mask is the same as that for remark action. 44 nest policy action 1, if supported. 45 classifier-behavior mode type If one of the last 5 bits of this object is set to 1, it indicates that the classifier-behavior mode type is supported, bit 0 stands for dot1q-tag-manipulation mode, bit 1 stands for QPPB mode, bit 2 stands for IP-source-guard mode, bit 3 stands for voice-VLAN mode, bit 4 stands for DCBX mode. 46 classifier-behavior statistics unit If one of the last 2 bits of this object is set to 1, it indicates that the classifier-behavior statistics unit is supported, bit 0 stands for packet, bit 1 stands for byte. queue statistic module: Index Characteristic Value 1 queue statistic function 1, if supported. 2 TC counter 1, if supported. 3 port queue statistic 1, if supported. 4 queue global function 1, if supported. 5 TC parameter If one of the last 4 bits of this object is set to 1, it indicates that the TC parameter is supported, bit 0 stands for interface, bit 1 stands for VLAN, bit 2 stands for local precedence, bit 3 stands for drop precedence."
],
null,
null,
null,
null
]
}