Reference record for OID 1.3.6.1.4.1.52642.8.12.1.3.2.1

fsmplsLsrModuleCompliance

Status in source: current.

Names: fsmplsLsrModuleCompliance

{
  "smi_kind": "MODULE-COMPLIANCE",
  "definition": [
    "fsmplsLsrModuleCompliance",
    "MODULE-COMPLIANCE",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Compliance statement for agents that support the MPLS LSR MIB.\"",
    "MODULE",
    "MANDATORY-GROUPS",
    "{",
    "fsmplsInSegmentGroup",
    ",",
    "fsmplsOutSegmentGroup",
    ",",
    "fsmplsXCGroup",
    ",",
    "fsmplsInterfaceGroup",
    ",",
    "fsmplsPerfGroup",
    ",",
    "fsmplsSegmentDiscontinuityGroup",
    "}",
    "GROUP",
    "fsmplsHCInSegmentPerfGroup",
    "DESCRIPTION",
    "\"This group is mandatory for those in-segment entries for which the object fsmplsInSegmentOutOctets wraps around too quickly.\"",
    "GROUP",
    "fsmplsHCOutSegmentPerfGroup",
    "DESCRIPTION",
    "\"This group is mandatory for those out-segment entries for which the object fsmplsOutSegmentOctets wraps around too quickly.\"",
    "GROUP",
    "fsmplsTrafficParamGroup",
    "DESCRIPTION",
    "\"This group is mandatory for those LSRs that support QoS resource reservation.\"",
    "GROUP",
    "fsmplsXCIsPersistentGroup",
    "DESCRIPTION",
    "\"This group is mandatory for devices which support persistent cross-connects. The following constraints apply: fsmplsXCIsPersistent must at least be read-only returning true(2).\"",
    "GROUP",
    "fsmplsXCIsNotPersistentGroup",
    "DESCRIPTION",
    "\"This group is mandatory for devices which support non-persistent cross-connects. The following constraints apply: fsmplsXCIsPersistent must at least be read-only returning false(1).\"",
    "OBJECT",
    "fsmplsInterfaceConfStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "OBJECT",
    "fsmplsInSegmentXCIndex",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsInSegmentNPop",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access if not required. This object should be set to 1 if it is read-only.\"",
    "OBJECT",
    "fsmplsInSegmentAddrFamily",
    "DESCRIPTION",
    "\"Write access is not required. A <value of other(0) should be supported because there may be cases where the agent may not know about or support any address types.\"",
    "OBJECT",
    "fsmplsInSegmentStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "OBJECT",
    "fsmplsOutSegmentIfIndex",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsOutSegmentPushTopLabel",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsOutSegmentTopLabel",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsOutSegmentNextHopIpAddrType",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"ipV6(3) need not be supported.\"",
    "OBJECT",
    "fsmplsOutSegmentNextHopIpv4Addr",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsOutSegmentNextHopIpv6Addr",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsOutSegmentRowStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "active",
    "(",
    "1",
    ")",
    ",",
    "notInService",
    "(",
    "2",
    ")",
    ",",
    "createAndGo",
    "(",
    "4",
    ")",
    ",",
    "destroy",
    "(",
    "6",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"The notReady(3) and createAndWait(5) states need not be supported.\"",
    "OBJECT",
    "fsmplsOutSegmentStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "OBJECT",
    "fsmplsXCLabelStackIndex",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsXCIsPersistent",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Write access is not required.\"",
    "OBJECT",
    "fsmplsXCAdminStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"A value of testing(3) need not be supported.\"",
    "OBJECT",
    "fsmplsXCOperStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "up",
    "(",
    "1",
    ")",
    ",",
    "down",
    "(",
    "2",
    ")",
    "}",
    "DESCRIPTION",
    "\"Only up(1) and down(2) need to be supported.\"",
    "OBJECT",
    "fsmplsXCRowStatus",
    "SYNTAX",
    "INTEGER",
    "{",
    "active",
    "(",
    "1",
    ")",
    ",",
    "notInService",
    "(",
    "2",
    ")",
    ",",
    "createAndGo",
    "(",
    "4",
    ")",
    ",",
    "destroy",
    "(",
    "6",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"The notReady(3) and createAndWait(5) states need not be supported.\"",
    "OBJECT",
    "fsmplsXCStorageType",
    "SYNTAX",
    "INTEGER",
    "{",
    "other",
    "(",
    "1",
    ")",
    "}",
    "MIN-ACCESS",
    "read-only",
    "DESCRIPTION",
    "\"Only other(1) needs to be supported.\"",
    "::=",
    "{",
    "fsmplsLsrCompliances",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Compliance statement for agents that support the MPLS LSR MIB."
    ],
    null,
    [
      "ComplianceModules",
      [
        [
          null,
          [
            "fsmplsInSegmentGroup",
            "fsmplsOutSegmentGroup",
            "fsmplsXCGroup",
            "fsmplsInterfaceGroup",
            "fsmplsPerfGroup",
            "fsmplsSegmentDiscontinuityGroup",
            "fsmplsHCInSegmentPerfGroup",
            "fsmplsHCOutSegmentPerfGroup",
            "fsmplsTrafficParamGroup",
            "fsmplsXCIsPersistentGroup",
            "fsmplsXCIsNotPersistentGroup"
          ]
        ]
      ]
    ]
  ]
}

• FS.COM official Documentation Hub native MIB packages · Publisher's source file: Source package: ies3220-8t4f-switch-snmp-mib-files.zip

  Module: FS-MPLS-LSR-MIB

  Published definition

  fsmplsLsrModuleCompliance MODULE-COMPLIANCE
     STATUS current
     DESCRIPTION
         "Compliance statement for agents that support the
          MPLS LSR MIB."
     MODULE -- this module
  
        -- The mandatory groups have to be implemented
        -- by all LSRs.  However, they may all be supported
        -- as read-only objects in the case where manual
        -- configuration is unsupported.
  
        MANDATORY-GROUPS    { fsmplsInSegmentGroup,
                              fsmplsOutSegmentGroup,
                              fsmplsXCGroup,
                              fsmplsInterfaceGroup,
                              fsmplsPerfGroup,
                              fsmplsSegmentDiscontinuityGroup }
  
        GROUP fsmplsHCInSegmentPerfGroup
        DESCRIPTION
            "This group is mandatory for those in-segment
             entries for which the object
             fsmplsInSegmentOutOctets wraps around too
             quickly."
  
        GROUP fsmplsHCOutSegmentPerfGroup
        DESCRIPTION
            "This group is mandatory for those out-segment
             entries for which the object
             fsmplsOutSegmentOctets wraps around too quickly."
            
        GROUP fsmplsTrafficParamGroup
        DESCRIPTION
            "This group is mandatory for those LSRs that
             support QoS resource reservation."
  
        -- Depending on whether the device implements
        -- persistent cross-connects or not one of the
        -- following two groups is mandatory.
  
        GROUP fsmplsXCIsPersistentGroup
        DESCRIPTION
            "This group is mandatory for devices which
             support persistent cross-connects.  The
             following constraints apply: fsmplsXCIsPersistent
             must at least be read-only returning true(2)."
  
        GROUP fsmplsXCIsNotPersistentGroup
        DESCRIPTION
            "This group is mandatory for devices which
             support non-persistent cross-connects.  The
             following constraints apply: fsmplsXCIsPersistent
             must at least be read-only returning false(1)."
  
        -- fsmplsInterfaceConfTable
  
        OBJECT      fsmplsInterfaceConfStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
        
        -- fsmplsInSegmentTable
            
        OBJECT     fsmplsInSegmentXCIndex
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      fsmplsInSegmentNPop
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access if not required.  This object
             should be set to 1 if it is read-only."
  
        OBJECT      fsmplsInSegmentAddrFamily
        DESCRIPTION
            "Write access is not required.  A <value of
             other(0) should be supported because there may
             be cases where the agent may not know about or
             support any address types."
  
        OBJECT      fsmplsInSegmentStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
  
        DESCRIPTION
            "Only other(1) needs to be supported."
  
        -- fsmplsOutSegmentTable
  
        OBJECT      fsmplsOutSegmentIfIndex
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
        
        OBJECT      fsmplsOutSegmentPushTopLabel
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      fsmplsOutSegmentTopLabel
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      fsmplsOutSegmentNextHopIpAddrType
        MIN-ACCESS  read-only
        DESCRIPTION
            "ipV6(3) need not be supported."
  
        OBJECT      fsmplsOutSegmentNextHopIpv4Addr
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      fsmplsOutSegmentNextHopIpv6Addr
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      fsmplsOutSegmentRowStatus
        SYNTAX      INTEGER { active(1), notInService(2),
                              createAndGo(4), destroy(6) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "The notReady(3) and createAndWait(5) states need
             not be supported."
        OBJECT      fsmplsOutSegmentStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
  
        -- fsmplsXCTable
  
        OBJECT      fsmplsXCLabelStackIndex
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      fsmplsXCIsPersistent
        MIN-ACCESS  read-only
        DESCRIPTION
            "Write access is not required."
  
        OBJECT      fsmplsXCAdminStatus
        SYNTAX      INTEGER { up(1), down(2) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "A value of testing(3) need not be supported."
  
        OBJECT      fsmplsXCOperStatus
        SYNTAX      INTEGER { up(1), down(2) }
        DESCRIPTION
            "Only up(1) and down(2) need to be supported."
        
        OBJECT      fsmplsXCRowStatus
        SYNTAX      INTEGER { active(1),
                               notInService(2),
                               createAndGo(4),
                               destroy(6) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "The notReady(3) and createAndWait(5) states need
             not be supported."
        
        OBJECT      fsmplsXCStorageType
        SYNTAX      INTEGER { other(1) }
        MIN-ACCESS  read-only
        DESCRIPTION
            "Only other(1) needs to be supported."
  
     ::= { fsmplsLsrCompliances 1 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'RowStatus', 'StorageType', 'RowPointer', 'TimeStamp'], 'FS-OID-MIB': ['fsMpls'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Counter32', 'Unsigned32', 'Counter64', 'Gauge32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressIPv4', 'InetAddressIPv6', 'InetAddressType'], 'IANA-ADDRESS-FAMILY-NUMBERS-MIB': ['AddressFamilyNumbers']}

  Related source files and packages:

  • IES5120-28TF Switch SNMP MIB FilesIES5120-28TF Switch SNMP MIB Files; Models: IES5120-28TF; Catalog updated: 2026-02-27 15:56:52; File: mall/resource/ies5120-28tf-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:14:36 GMT; 2.6 MiB
  • IES3220-8T4F Switch SNMP MIB FilesIES3220-8T4F Switch SNMP MIB Files; Models: IES3220-8T4F; Catalog updated: 2025-12-03 14:28:43; File: mall/resource/ies3220-8t4f-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:08:16 GMT; 2.6 MiB
  • IES5120-48T4S Switch SNMP MIB FilesIES5120-48T4S Switch SNMP MIB Files; Models: IES5120-48T4S; Catalog updated: 2026-02-27 16:10:26; File: mall/resource/ies5120-48t4s-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:16:11 GMT; 2.6 MiB

  Show all 10 related files and packages

  • TSN3220-10S Switch SNMP MIB FilesTSN3220-10S Switch SNMP MIB Files; Models: TSN3220-10S; Catalog updated: 2026-01-08 09:53:00; File: mall/resource/tsn3220-10s-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:10:41 GMT; 2.6 MiB
  • IES5120-28TS-P Switch SNMP MIB FilesIES5120-28TS-P Switch SNMP MIB Files; Models: IES5120-28TS-P; Catalog updated: 2026-02-27 16:09:52; File: mall/resource/ies5120-28ts-p-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:15:40 GMT; 2.6 MiB
  • IES5220-30TS-3ES Switch SNMP MIB FilesIES5220-30TS-3ES Switch SNMP MIB Files; Models: IES5220-30TS-3ES; Catalog updated: 2025-08-19 16:17:18; File: mall/resource/ies5220-30ts-3es-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:17:18 GMT; 2.6 MiB
  • IES5220-6S-3ES Switch SNMP MIB FilesIES5220-6S-3ES Switch SNMP MIB Files; Models: IES5220-6S-3ES; Catalog updated: 2026-02-27 16:11:15; File: mall/resource/ies5220-6s-3es-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:32:47 GMT; 2.6 MiB
  • IES3220-8T4F-U Switch SNMP MIB FilesIES3220-8T4F-U Switch SNMP MIB Files; Models: IES3220-8T4F-U; Catalog updated: 2025-12-03 14:47:49; File: mall/resource/ies3220-8t4f-u-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:09:07 GMT; 2.6 MiB
  • IES5120-28TS Switch SNMP MIB FilesIES5120-28TS Switch SNMP MIB Files; Models: IES5120-28TS; Catalog updated: 2026-02-27 15:57:39; File: mall/resource/ies5120-28ts-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:15:08 GMT; 2.6 MiB
  • TSN3220-10S-U Switch SNMP MIB FilesTSN3220-10S-U Switch SNMP MIB Files; Models: TSN3220-10S-U; Catalog updated: 2025-12-16 18:11:48; File: mall/resource/tsn3220-10s-u-switch-snmp-mib-files.zip; Publisher Last-Modified: Tue, 19 Aug 2025 08:13:57 GMT; 2.6 MiB
  
  Source location: FS-MPLS-LSR-MIB::fsmplsLsrModuleCompliance.
  Source version and references

  Same file in tsn3220-10s-u-switch-snmp-mib-files.zip.

  Same file in tsn3220-10s-switch-snmp-mib-files.zip.

  Same file in ies5220-6s-3es-switch-snmp-mib-files.zip.

  Same file in ies5220-30ts-3es-switch-snmp-mib-files.zip.

  Downloaded: 2026-10-24T13:35:15.567923+00:00.