OID reference
1.3.6.1.4.1.529.10.4.1.16
State of the connection before disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise prNotApplicable(1) will be returned.
Identification
{1 3 6 1 4 1 529 10 4 1 16}
Definitions may combine these properties differently.
Numbers refer to source variants above. “All” covers variants that define enumerated values: 1, 2, 3, 4, 5. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 1 | prNotApplicable :PR_NOT_APPLICABLE; not applicable | All |
| 2 | prUnknown :PR_UNKNOWN; progress unknown; unknown | All |
| 7 | prNotConnected :PR_NOT_CONNECTED; not connected | All except 2, 4 |
| 10 | prCallUp :PR_CALL_UP; call is up; call up | All |
| 11 | prDialSrvcBlocked This dnis is blocked | All except 2, 4 |
| 30 | prModemUp :PR_MODEM_UP; modem is up; modem up | All |
| 31 | prModemWaitDCD :PR_MODEM_AWAITING_DCD; modem is awaiting DCD For tntmadd card, it also means that we've detected a remote modem; waiting for DCD (Carrier) | All |
| 32 | prModemWaitCodes :PR_MODEM_AWAITING_CODES; modem is awaiting codes; waiting for result codes | All |
| 33 | prModemWaitRemoteMdm For tntmadd card, we are still waiting for signals from a remote modem | 1 |
| 40 | prTermSrvStarted terminal server sess started (needn't be logged in yet) | All |
| 41 | prRawTcpStarting Started raw tcp; tcp connection connecting | All except 4 |
| 42 | prTelnetStarting Started immediate telnet; immediate telnet connecting | All except 4 |
| 43 | prRawTcpConnect raw connected to host; raw tcp connected to host | All except 4 |
| 44 | prTelnetConnect telnet connected to host | All except 4 |
| 45 | prRloginStarting rlogin session starting; rlogin started | All except 4 |
| 46 | prRloginConnect rlogin connect; rlogin session connected | All except 4 |
| 47 | prTermSrvStartedThruCR termsrv authentication started through user entering carriage return | All except 2, 4 |
| 50 | prModemOutdialCallUp call is active on a modem outdial session | All except 4 |
| 60 | prLanSessionUp LAN session up; routing/bridging session up | All |
| 61 | prOpeningLCP :PR_OPENING_LCP; LCP negotiations allowed; opening LCP | All |
| 62 | prOpeningCCP :PR_OPENING_CCP; CCP negotiations allowed; opening CCP | All |
| 63 | prOpeningIPNCP :PR_OPENING_IPNCP; IP NCP negotiations allowed; opening IPNCP | All |
| 64 | prOpeningBNCP :PR_OPENING_BNCP; Bridging NCP negotiations allowed; opening BNCP | All |
| 65 | prLCPOpened LCP in Open state | All |
| 66 | prCCPOpened CCP in Open state | All |
| 67 | prIPNCPOpened IP NCP in Open state | All |
| 68 | prBNCPOpened Bridging NCP in Open state | All |
| 69 | prLCPStateInitial LCP in Initial state | All |
| 70 | prLCPStateStarting LCP in Starting state | All |
| 71 | prLCPStateClosed LCP in Closed state | All |
| 72 | prLCPStateStopped LCP in Stopped state | All |
| 73 | prLCPStateClosing LCP in Closing state | All |
| 74 | prLCPStateStopping LCP in Stopping state | All |
| 75 | prLCPStateReqSent LCP in Req-Sent state; LCP in Request Sent state | All |
| 76 | prLCPStateAckRecd LCP in ACK Received state; LCP in Ack-Rcvd state | All |
| 77 | prLCPStateAckSent LCP in ACK Sent state; LCP in Ack-Sent state | All |
| 80 | prIPXNCPOpened IPX NCP in Open state | All except 4 |
| 81 | prAtNcpOpened AT NCP in Open State; AT NCP in Open state | All except 4 |
| 82 | prBACPOpening BACP Opening; BACP being opened | All except 4 |
| 83 | prBACPOpened BACP in Open state; BACP is now open | All except 4 |
| 84 | prCBCPOpening CBCP being opened | All except 2, 4 |
| 85 | prCBCPOpened CBCP is now open | All except 2, 4 |
| 90 | prV110Up V110 connected; V110 is connected | All except 4 |
| 91 | prV110StateOpened V110 in V110_STATE_OPENED state; V110 opened | All except 4 |
| 92 | prV110StateCarrier V110 carrier; V110 in V110_STATE_CARRIER state | All except 4 |
| 93 | prV110StateReset V110 in V110_STATE_RESET state; V110 reset | All except 4 |
| 94 | prV110StateClosed V110 closed; V110 in V110_STATE_CLOSED state | All except 4 |
| 100 | prClidCallBackReq CLID indicates callback required | All except 2, 4 |
| 101 | prClidAuthFailed CLID auth failed | All except 2, 4 |
| 102 | prClidAuthTimeout CLID auth timed out waiting for server response | All except 2, 4 |
| 120 | prFRLinkInactive Frame relay link inactive (ie. LMI negotiations in progress) | All except 4 |
| 121 | prFRLinkActive Frame relay link has end-to-end connectivity (ie. PVCs can pass data) | All except 4 |
| 200 | prStartingAuth Starting Auth layer | All except 2, 4 |
| 201 | prOpeningAuth Starting Auth layer | All except 2, 4 |
| 202 | prSkippingAuth Skipping Auth layer | All except 2, 4 |
| 203 | prAuthOpened Auth layer opened | All except 2, 4 |
| 240 | prTunnelStarting Starting a tunnel: call should be tunneled. | 1 |
| 241 | prTunnelResolving Resolving tunnel server endpoint | 1 |
| 242 | prTunnelConnecting Connecting: trying to contact the tunnel server endpoint. | 1 |
| 243 | prTunnelEstablishing Establishing: trying to establish the tunnel. In some protocols, this step is reached when the tunnel endpoints have validated each other. | 1 |
| 244 | prTunnelUp Up: tunnel is up and ready. User data can flow. | 1 |
| 300 | prH323NewIncomingCallFromWan ### ### VOIP related progress codes ### h323 incoming call from wan | 1, 5 |
| 301 | prH323DetectingPinFromWan h323 detecting pin number | 1, 5 |
| 302 | prH323DetectingDnisFromWan h323 detecting dial number | 1, 5 |
| 303 | prH323SendingArqToGatekeeper h323 sending ARQ to gatekeeper | 1, 5 |
| 304 | prH323ReceivedAcfFromGatekeeper h323 received ACF from gatekeeper | 1, 5 |
| 305 | prH323WaitingH225AlertingFromLan h323 waiting for H225 alerting | 1, 5 |
| 306 | prH323WaitingH225ProceedingFromLan h323 waiting for H225 proceeding | 1, 5 |
| 307 | prH323PlayingErrPromptToWan h323 playing error prompt | 1, 5 |
| 308 | prH323HairpinDialingOutToWan h323 dialing out a hairpin call | 1, 5 |
| 309 | prH323ReceivedH225SetupFromLan h323 received H225 call setup | 1, 5 |
| 310 | prH323DialingOutToWan h323 dialing out to wan | 1, 5 |
| 311 | prH323WanAnsweredAndRtpNotUpYet h323 wan up and waiting for rtp up | 1, 5 |
| 312 | prH323CallConnected h323 call connected | 1, 5 |
| 313 | prH323PlayingBusyPromptToWan h323 playing busy prompt | 1, 5 |
| 314 | prH323DisconnectingRtp h323 disconnecting rtp connection | 1, 5 |
| 315 | prH323RtpDisconnected h323 rtp disconnected | 1, 5 |
| 316 | prH323FaxDisconnected h323 fax disconnected | 1, 5 |
| 400 | prSs7VoipChangeParameter ### ### Start of SS7 VOIP ### changing rtp parameters | 1, 5 |
| 401 | prSs7VoipRtpOpened rtp-connection opened | 1, 5 |
| 402 | prSs7VoipRtpClosed rtp closed rtp-connection | 1, 5 |
| 403 | prSs7VoipTerminateRtp ss7 terminating rtp-connection | 1, 5 |
| 404 | prSs7VoipCedDetected ced tone detected | 1, 5 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ASCEND-MIB, the row index eventIdNumber is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.529.10.4.1.16.<eventIdNumber>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: eventIdNumber.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.529.10.4.1.16
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
eventConnectProgress OBJECT-TYPE
SYNTAX INTEGER {
prNotApplicable(1), -- not applicable
prUnknown(2), -- unknown
prNotConnected(7), -- not connected
prCallUp(10), -- call is up
prDialSrvcBlocked(11), -- This dnis is blocked
prModemUp(30), -- modem is up
prModemWaitDCD(31), -- modem is awaiting DCD For tntmadd card, it also means that we've detected a remote modem
prModemWaitCodes(32), -- modem is awaiting codes
prModemWaitRemoteMdm(33), -- For tntmadd card, we are still waiting for signals from a remote modem
prTermSrvStarted(40), -- terminal server sess started (needn't be logged in yet)
prRawTcpStarting(41), -- Started raw tcp
prTelnetStarting(42), -- Started immediate telnet
prRawTcpConnect(43), -- raw connected to host
prTelnetConnect(44), -- telnet connected to host
prRloginStarting(45), -- rlogin started
prRloginConnect(46), -- rlogin connect
prTermSrvStartedThruCR(47), -- termsrv authentication started through user entering carriage return
prModemOutdialCallUp(50), -- call is active on a modem outdial session
prLanSessionUp(60), -- routing/bridging session up
prOpeningLCP(61), -- opening LCP
prOpeningCCP(62), -- opening CCP
prOpeningIPNCP(63), -- opening IPNCP
prOpeningBNCP(64), -- opening BNCP
prLCPOpened(65), -- LCP in Open state
prCCPOpened(66), -- CCP in Open state
prIPNCPOpened(67), -- IP NCP in Open state
prBNCPOpened(68), -- Bridging NCP in Open state
prLCPStateInitial(69), -- LCP in Initial state
prLCPStateStarting(70), -- LCP in Starting state
prLCPStateClosed(71), -- LCP in Closed state
prLCPStateStopped(72), -- LCP in Stopped state
prLCPStateClosing(73), -- LCP in Closing state
prLCPStateStopping(74), -- LCP in Stopping state
prLCPStateReqSent(75), -- LCP in Req-Sent state
prLCPStateAckRecd(76), -- LCP in Ack-Rcvd state
prLCPStateAckSent(77), -- LCP in Ack-Sent state
prIPXNCPOpened(80), -- IPX NCP in Open state
prAtNcpOpened(81), -- AT NCP in Open state
prBACPOpening(82), -- BACP being opened
prBACPOpened(83), -- BACP is now open
prCBCPOpening(84), -- CBCP being opened
prCBCPOpened(85), -- CBCP is now open
prV110Up(90), -- V110 is connected
prV110StateOpened(91), -- V110 in V110_STATE_OPENED state
prV110StateCarrier(92), -- V110 in V110_STATE_CARRIER state
prV110StateReset(93), -- V110 in V110_STATE_RESET state
prV110StateClosed(94), -- V110 in V110_STATE_CLOSED state
prClidCallBackReq(100), -- CLID indicates callback required
prClidAuthFailed(101), -- CLID auth failed
prClidAuthTimeout(102), -- CLID auth timed out waiting for server response
prFRLinkInactive(120), -- Frame relay link inactive (ie. LMI negotiations in progress)
prFRLinkActive(121), -- Frame relay link has end-to-end connectivity (ie. PVCs can pass data)
prStartingAuth(200), -- Starting Auth layer
prOpeningAuth(201), -- Starting Auth layer
prSkippingAuth(202), -- Skipping Auth layer
prAuthOpened(203), -- Auth layer opened
prTunnelStarting(240), -- Starting a tunnel: call should be tunneled.
prTunnelResolving(241), -- Resolving tunnel server endpoint
prTunnelConnecting(242), -- Connecting: trying to contact the tunnel server endpoint.
prTunnelEstablishing(243), -- Establishing: trying to establish the tunnel. In some protocols, this step is reached when the tunnel endpoints have validated each other.
prTunnelUp(244), -- Up: tunnel is up and ready. User data can flow.
prH323NewIncomingCallFromWan(300), -- ### ### VOIP related progress codes ### h323 incoming call from wan
prH323DetectingPinFromWan(301), -- h323 detecting pin number
prH323DetectingDnisFromWan(302), -- h323 detecting dial number
prH323SendingArqToGatekeeper(303), -- h323 sending ARQ to gatekeeper
prH323ReceivedAcfFromGatekeeper(304), -- h323 received ACF from gatekeeper
prH323WaitingH225AlertingFromLan(305), -- h323 waiting for H225 alerting
prH323WaitingH225ProceedingFromLan(306), -- h323 waiting for H225 proceeding
prH323PlayingErrPromptToWan(307), -- h323 playing error prompt
prH323HairpinDialingOutToWan(308), -- h323 dialing out a hairpin call
prH323ReceivedH225SetupFromLan(309), -- h323 received H225 call setup
prH323DialingOutToWan(310), -- h323 dialing out to wan
prH323WanAnsweredAndRtpNotUpYet(311), -- h323 wan up and waiting for rtp up
prH323CallConnected(312), -- h323 call connected
prH323PlayingBusyPromptToWan(313), -- h323 playing busy prompt
prH323DisconnectingRtp(314), -- h323 disconnecting rtp connection
prH323RtpDisconnected(315), -- h323 rtp disconnected
prH323FaxDisconnected(316), -- h323 fax disconnected
prSs7VoipChangeParameter(400), -- ### ### Start of SS7 VOIP ### changing rtp parameters
prSs7VoipRtpOpened(401), -- rtp-connection opened
prSs7VoipRtpClosed(402), -- rtp closed rtp-connection
prSs7VoipTerminateRtp(403), -- ss7 terminating rtp-connection
prSs7VoipCedDetected(404) -- ced tone detected
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "State of the connection before disconnecting.
Applicable only if 'eventType' is callCleared(3)
otherwise prNotApplicable(1) will be returned."
::= { eventEntry 16 }eventConnectProgress OBJECT-TYPE
SYNTAX INTEGER {
prNotApplicable(1),
prUnknown(2), -- progress unknown
prCallUp(10), -- call up
prModemUp(30), -- modem up
prModemWaitDCD(31), -- waiting for DCD (Carrier)
prModemWaitCodes(32), -- waiting for result codes
prTermSrvStarted(40), -- terminal server session
-- started up
prRawTcpStarting(41), -- tcp connection connecting
prTelnetStarting(42), -- immediate telnet connecting
prRawTcpConnect(43), -- raw tcp connected to host
prTelnetConnect(44), -- immediate telnet connected
-- to host
prRloginStarting(45), -- rlogin session starting
prRloginConnect(46), -- rlogin session connected
prModemOutdialCallUp(50), -- call is up for a modem on
-- a virtual connect session
prLanSessionUp(60), -- LAN session up
prOpeningLCP(61), -- LCP negotiations allowed
prOpeningCCP(62), -- CCP negotiations allowed
prOpeningIPNCP(63), -- IP NCP negotiations allowed
prOpeningBNCP(64), -- Bridging NCP negotiations allowed
prLCPOpened(65), -- LCP in Open state
prCCPOpened(66), -- CCP in Open state
prIPNCPOpened(67), -- IP NCP in Open state
prBNCPOpened(68), -- Bridging NCP in Open state
prLCPStateInitial(69), -- LCP in Initial state
prLCPStateStarting(70), -- LCP in Starting state
prLCPStateClosed(71), -- LCP in Closed state
prLCPStateStopped(72), -- LCP in Stopped state
prLCPStateClosing(73), -- LCP in Closing state
prLCPStateStopping(74), -- LCP in Stopping state
prLCPStateReqSent(75), -- LCP in Request Sent state
prLCPStateAckRecd(76), -- LCP in ACK Received state
prLCPStateAckSent(77), -- LCP in ACK Sent state
prIPXNCPOpened(80), -- IPX NCP in Open state
prAtNcpOpened(81), -- AT NCP in Open State
prBACPOpening(82), -- BACP Opening
prBACPOpened(83), -- BACP in Open state
prV110Up(90), -- V110 connected
prV110StateOpened(91), -- V110 opened
prV110StateCarrier(92), -- V110 carrier
prV110StateReset(93), -- V110 reset
prV110StateClosed(94), -- V110 closed
prFRLinkInactive(120), -- FR link inactive (ie.
-- LMI negotiations in
-- progress)
prFRLinkActive(121) -- FR link active (ie.
-- PVCs can pass data)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "State of the connection before disconnecting.
Applicable only if 'eventType' is callCleared(3)
otherwise prNotApplicable(1) will be returned."
::= { eventEntry 16 }eventConnectProgress OBJECT-TYPE
SYNTAX INTEGER {
prNotApplicable(1), -- :PR_NOT_APPLICABLE
prUnknown(2), -- :PR_UNKNOWN
prNotConnected(7), -- :PR_NOT_CONNECTED
prCallUp(10), -- :PR_CALL_UP
prDialSrvcBlocked(11), -- This dnis is blocked
prModemUp(30), -- :PR_MODEM_UP
prModemWaitDCD(31), -- :PR_MODEM_AWAITING_DCD
prModemWaitCodes(32), -- :PR_MODEM_AWAITING_CODES
prTermSrvStarted(40), -- terminal server sess started (needn't be logged in yet)
prRawTcpStarting(41), -- Started raw tcp
prTelnetStarting(42), -- Started immediate telnet
prRawTcpConnect(43), -- raw connected to host
prTelnetConnect(44), -- telnet connected to host
prRloginStarting(45), -- rlogin started
prRloginConnect(46), -- rlogin connect
prTermSrvStartedThruCR(47), -- termsrv authentication started through user entering carriage return
prModemOutdialCallUp(50), -- call is active on a modem outdial session
prLanSessionUp(60), -- routing/bridging session up
prOpeningLCP(61), -- :PR_OPENING_LCP
prOpeningCCP(62), -- :PR_OPENING_CCP
prOpeningIPNCP(63), -- :PR_OPENING_IPNCP
prOpeningBNCP(64), -- :PR_OPENING_BNCP
prLCPOpened(65), -- LCP in Open state
prCCPOpened(66), -- CCP in Open state
prIPNCPOpened(67), -- IP NCP in Open state
prBNCPOpened(68), -- Bridging NCP in Open state
prLCPStateInitial(69), -- LCP in Initial state
prLCPStateStarting(70), -- LCP in Starting state
prLCPStateClosed(71), -- LCP in Closed state
prLCPStateStopped(72), -- LCP in Stopped state
prLCPStateClosing(73), -- LCP in Closing state
prLCPStateStopping(74), -- LCP in Stopping state
prLCPStateReqSent(75), -- LCP in Req-Sent state
prLCPStateAckRecd(76), -- LCP in Ack-Rcvd state
prLCPStateAckSent(77), -- LCP in Ack-Sent state
prIPXNCPOpened(80), -- IPX NCP in Open state
prAtNcpOpened(81), -- AT NCP in Open state
prBACPOpening(82), -- BACP being opened
prBACPOpened(83), -- BACP is now open
prCBCPOpening(84), -- CBCP being opened
prCBCPOpened(85), -- CBCP is now open
prV110Up(90), -- V110 is connected
prV110StateOpened(91), -- V110 in V110_STATE_OPENED state
prV110StateCarrier(92), -- V110 in V110_STATE_CARRIER state
prV110StateReset(93), -- V110 in V110_STATE_RESET state
prV110StateClosed(94), -- V110 in V110_STATE_CLOSED state
prClidCallBackReq(100), -- CLID indicates callback required
prClidAuthFailed(101), -- CLID auth failed
prClidAuthTimeout(102), -- CLID auth timed out waiting for server response
prFRLinkInactive(120), -- Frame relay link inactive (ie. LMI negotiations in progress)
prFRLinkActive(121), -- Frame relay link has end-to-end connectivity (ie. PVCs can pass data)
prStartingAuth(200), -- Starting Auth layer
prOpeningAuth(201), -- Starting Auth layer
prSkippingAuth(202), -- Skipping Auth layer
prAuthOpened(203) -- Auth layer opened
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "State of the connection before disconnecting.
Applicable only if 'eventType' is callCleared(3)
otherwise prNotApplicable(1) will be returned."
::= { eventEntry 16 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
MIBdepot
Parsed from ASCEND-EVENT-MIB.mib · ASCEND-EVENT-MIB
Source file: Download ASCEND-EVENT-MIB.mib
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: eventConnectProgress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eventConnectProgress",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"prNotApplicable",
"(",
"1",
")",
",",
"prUnknown",
"(",
"2",
")",
",",
"prNotConnected",
"(",
"7",
")",
",",
"prCallUp",
"(",
"10",
")",
",",
"prDialSrvcBlocked",
"(",
"11",
")",
",",
"prModemUp",
"(",
"30",
")",
",",
"prModemWaitDCD",
"(",
"31",
")",
",",
"prModemWaitCodes",
"(",
"32",
")",
",",
"prModemWaitRemoteMdm",
"(",
"33",
")",
",",
"prTermSrvStarted",
"(",
"40",
")",
",",
"prRawTcpStarting",
"(",
"41",
")",
",",
"prTelnetStarting",
"(",
"42",
")",
",",
"prRawTcpConnect",
"(",
"43",
")",
",",
"prTelnetConnect",
"(",
"44",
")",
",",
"prRloginStarting",
"(",
"45",
")",
",",
"prRloginConnect",
"(",
"46",
")",
",",
"prTermSrvStartedThruCR",
"(",
"47",
")",
",",
"prModemOutdialCallUp",
"(",
"50",
")",
",",
"prLanSessionUp",
"(",
"60",
")",
",",
"prOpeningLCP",
"(",
"61",
")",
",",
"prOpeningCCP",
"(",
"62",
")",
",",
"prOpeningIPNCP",
"(",
"63",
")",
",",
"prOpeningBNCP",
"(",
"64",
")",
",",
"prLCPOpened",
"(",
"65",
")",
",",
"prCCPOpened",
"(",
"66",
")",
",",
"prIPNCPOpened",
"(",
"67",
")",
",",
"prBNCPOpened",
"(",
"68",
")",
",",
"prLCPStateInitial",
"(",
"69",
")",
",",
"prLCPStateStarting",
"(",
"70",
")",
",",
"prLCPStateClosed",
"(",
"71",
")",
",",
"prLCPStateStopped",
"(",
"72",
")",
",",
"prLCPStateClosing",
"(",
"73",
")",
",",
"prLCPStateStopping",
"(",
"74",
")",
",",
"prLCPStateReqSent",
"(",
"75",
")",
",",
"prLCPStateAckRecd",
"(",
"76",
")",
",",
"prLCPStateAckSent",
"(",
"77",
")",
",",
"prIPXNCPOpened",
"(",
"80",
")",
",",
"prAtNcpOpened",
"(",
"81",
")",
",",
"prBACPOpening",
"(",
"82",
")",
",",
"prBACPOpened",
"(",
"83",
")",
",",
"prCBCPOpening",
"(",
"84",
")",
",",
"prCBCPOpened",
"(",
"85",
")",
",",
"prV110Up",
"(",
"90",
")",
",",
"prV110StateOpened",
"(",
"91",
")",
",",
"prV110StateCarrier",
"(",
"92",
")",
",",
"prV110StateReset",
"(",
"93",
")",
",",
"prV110StateClosed",
"(",
"94",
")",
",",
"prClidCallBackReq",
"(",
"100",
")",
",",
"prClidAuthFailed",
"(",
"101",
")",
",",
"prClidAuthTimeout",
"(",
"102",
")",
",",
"prFRLinkInactive",
"(",
"120",
")",
",",
"prFRLinkActive",
"(",
"121",
")",
",",
"prStartingAuth",
"(",
"200",
")",
",",
"prOpeningAuth",
"(",
"201",
")",
",",
"prSkippingAuth",
"(",
"202",
")",
",",
"prAuthOpened",
"(",
"203",
")",
",",
"prTunnelStarting",
"(",
"240",
")",
",",
"prTunnelResolving",
"(",
"241",
")",
",",
"prTunnelConnecting",
"(",
"242",
")",
",",
"prTunnelEstablishing",
"(",
"243",
")",
",",
"prTunnelUp",
"(",
"244",
")",
",",
"prH323NewIncomingCallFromWan",
"(",
"300",
")",
",",
"prH323DetectingPinFromWan",
"(",
"301",
")",
",",
"prH323DetectingDnisFromWan",
"(",
"302",
")",
",",
"prH323SendingArqToGatekeeper",
"(",
"303",
")",
",",
"prH323ReceivedAcfFromGatekeeper",
"(",
"304",
")",
",",
"prH323WaitingH225AlertingFromLan",
"(",
"305",
")",
",",
"prH323WaitingH225ProceedingFromLan",
"(",
"306",
")",
",",
"prH323PlayingErrPromptToWan",
"(",
"307",
")",
",",
"prH323HairpinDialingOutToWan",
"(",
"308",
")",
",",
"prH323ReceivedH225SetupFromLan",
"(",
"309",
")",
",",
"prH323DialingOutToWan",
"(",
"310",
")",
",",
"prH323WanAnsweredAndRtpNotUpYet",
"(",
"311",
")",
",",
"prH323CallConnected",
"(",
"312",
")",
",",
"prH323PlayingBusyPromptToWan",
"(",
"313",
")",
",",
"prH323DisconnectingRtp",
"(",
"314",
")",
",",
"prH323RtpDisconnected",
"(",
"315",
")",
",",
"prH323FaxDisconnected",
"(",
"316",
")",
",",
"prSs7VoipChangeParameter",
"(",
"400",
")",
",",
"prSs7VoipRtpOpened",
"(",
"401",
")",
",",
"prSs7VoipRtpClosed",
"(",
"402",
")",
",",
"prSs7VoipTerminateRtp",
"(",
"403",
")",
",",
"prSs7VoipCedDetected",
"(",
"404",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"State of the connection before disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise prNotApplicable(1) will be returned.\"",
"::=",
"{",
"eventEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"prNotApplicable",
1
],
[
"prUnknown",
2
],
[
"prNotConnected",
7
],
[
"prCallUp",
10
],
[
"prDialSrvcBlocked",
11
],
[
"prModemUp",
30
],
[
"prModemWaitDCD",
31
],
[
"prModemWaitCodes",
32
],
[
"prModemWaitRemoteMdm",
33
],
[
"prTermSrvStarted",
40
],
[
"prRawTcpStarting",
41
],
[
"prTelnetStarting",
42
],
[
"prRawTcpConnect",
43
],
[
"prTelnetConnect",
44
],
[
"prRloginStarting",
45
],
[
"prRloginConnect",
46
],
[
"prTermSrvStartedThruCR",
47
],
[
"prModemOutdialCallUp",
50
],
[
"prLanSessionUp",
60
],
[
"prOpeningLCP",
61
],
[
"prOpeningCCP",
62
],
[
"prOpeningIPNCP",
63
],
[
"prOpeningBNCP",
64
],
[
"prLCPOpened",
65
],
[
"prCCPOpened",
66
],
[
"prIPNCPOpened",
67
],
[
"prBNCPOpened",
68
],
[
"prLCPStateInitial",
69
],
[
"prLCPStateStarting",
70
],
[
"prLCPStateClosed",
71
],
[
"prLCPStateStopped",
72
],
[
"prLCPStateClosing",
73
],
[
"prLCPStateStopping",
74
],
[
"prLCPStateReqSent",
75
],
[
"prLCPStateAckRecd",
76
],
[
"prLCPStateAckSent",
77
],
[
"prIPXNCPOpened",
80
],
[
"prAtNcpOpened",
81
],
[
"prBACPOpening",
82
],
[
"prBACPOpened",
83
],
[
"prCBCPOpening",
84
],
[
"prCBCPOpened",
85
],
[
"prV110Up",
90
],
[
"prV110StateOpened",
91
],
[
"prV110StateCarrier",
92
],
[
"prV110StateReset",
93
],
[
"prV110StateClosed",
94
],
[
"prClidCallBackReq",
100
],
[
"prClidAuthFailed",
101
],
[
"prClidAuthTimeout",
102
],
[
"prFRLinkInactive",
120
],
[
"prFRLinkActive",
121
],
[
"prStartingAuth",
200
],
[
"prOpeningAuth",
201
],
[
"prSkippingAuth",
202
],
[
"prAuthOpened",
203
],
[
"prTunnelStarting",
240
],
[
"prTunnelResolving",
241
],
[
"prTunnelConnecting",
242
],
[
"prTunnelEstablishing",
243
],
[
"prTunnelUp",
244
],
[
"prH323NewIncomingCallFromWan",
300
],
[
"prH323DetectingPinFromWan",
301
],
[
"prH323DetectingDnisFromWan",
302
],
[
"prH323SendingArqToGatekeeper",
303
],
[
"prH323ReceivedAcfFromGatekeeper",
304
],
[
"prH323WaitingH225AlertingFromLan",
305
],
[
"prH323WaitingH225ProceedingFromLan",
306
],
[
"prH323PlayingErrPromptToWan",
307
],
[
"prH323HairpinDialingOutToWan",
308
],
[
"prH323ReceivedH225SetupFromLan",
309
],
[
"prH323DialingOutToWan",
310
],
[
"prH323WanAnsweredAndRtpNotUpYet",
311
],
[
"prH323CallConnected",
312
],
[
"prH323PlayingBusyPromptToWan",
313
],
[
"prH323DisconnectingRtp",
314
],
[
"prH323RtpDisconnected",
315
],
[
"prH323FaxDisconnected",
316
],
[
"prSs7VoipChangeParameter",
400
],
[
"prSs7VoipRtpOpened",
401
],
[
"prSs7VoipRtpClosed",
402
],
[
"prSs7VoipTerminateRtp",
403
],
[
"prSs7VoipCedDetected",
404
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"State of the connection before disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise prNotApplicable(1) will be returned."
],
null,
null,
null,
null
]
}Module: ASCEND-EVENT-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'ASCEND-MIB': ['eventGroup'], 'RFC1155-SMI': ['IpAddress', 'Counter']}Status in source: mandatory.
Names: eventConnectProgress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eventConnectProgress",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"prNotApplicable",
"(",
"1",
")",
",",
"prUnknown",
"(",
"2",
")",
",",
"prCallUp",
"(",
"10",
")",
",",
"prModemUp",
"(",
"30",
")",
",",
"prModemWaitDCD",
"(",
"31",
")",
",",
"prModemWaitCodes",
"(",
"32",
")",
",",
"prTermSrvStarted",
"(",
"40",
")",
",",
"prRawTcpStarting",
"(",
"41",
")",
",",
"prTelnetStarting",
"(",
"42",
")",
",",
"prRawTcpConnect",
"(",
"43",
")",
",",
"prTelnetConnect",
"(",
"44",
")",
",",
"prRloginStarting",
"(",
"45",
")",
",",
"prRloginConnect",
"(",
"46",
")",
",",
"prModemOutdialCallUp",
"(",
"50",
")",
",",
"prLanSessionUp",
"(",
"60",
")",
",",
"prOpeningLCP",
"(",
"61",
")",
",",
"prOpeningCCP",
"(",
"62",
")",
",",
"prOpeningIPNCP",
"(",
"63",
")",
",",
"prOpeningBNCP",
"(",
"64",
")",
",",
"prLCPOpened",
"(",
"65",
")",
",",
"prCCPOpened",
"(",
"66",
")",
",",
"prIPNCPOpened",
"(",
"67",
")",
",",
"prBNCPOpened",
"(",
"68",
")",
",",
"prLCPStateInitial",
"(",
"69",
")",
",",
"prLCPStateStarting",
"(",
"70",
")",
",",
"prLCPStateClosed",
"(",
"71",
")",
",",
"prLCPStateStopped",
"(",
"72",
")",
",",
"prLCPStateClosing",
"(",
"73",
")",
",",
"prLCPStateStopping",
"(",
"74",
")",
",",
"prLCPStateReqSent",
"(",
"75",
")",
",",
"prLCPStateAckRecd",
"(",
"76",
")",
",",
"prLCPStateAckSent",
"(",
"77",
")",
",",
"prIPXNCPOpened",
"(",
"80",
")",
",",
"prAtNcpOpened",
"(",
"81",
")",
",",
"prBACPOpening",
"(",
"82",
")",
",",
"prBACPOpened",
"(",
"83",
")",
",",
"prV110Up",
"(",
"90",
")",
",",
"prV110StateOpened",
"(",
"91",
")",
",",
"prV110StateCarrier",
"(",
"92",
")",
",",
"prV110StateReset",
"(",
"93",
")",
",",
"prV110StateClosed",
"(",
"94",
")",
",",
"prFRLinkInactive",
"(",
"120",
")",
",",
"prFRLinkActive",
"(",
"121",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"State of the connection before disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise prNotApplicable(1) will be returned.\"",
"::=",
"{",
"eventEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"prNotApplicable",
1
],
[
"prUnknown",
2
],
[
"prCallUp",
10
],
[
"prModemUp",
30
],
[
"prModemWaitDCD",
31
],
[
"prModemWaitCodes",
32
],
[
"prTermSrvStarted",
40
],
[
"prRawTcpStarting",
41
],
[
"prTelnetStarting",
42
],
[
"prRawTcpConnect",
43
],
[
"prTelnetConnect",
44
],
[
"prRloginStarting",
45
],
[
"prRloginConnect",
46
],
[
"prModemOutdialCallUp",
50
],
[
"prLanSessionUp",
60
],
[
"prOpeningLCP",
61
],
[
"prOpeningCCP",
62
],
[
"prOpeningIPNCP",
63
],
[
"prOpeningBNCP",
64
],
[
"prLCPOpened",
65
],
[
"prCCPOpened",
66
],
[
"prIPNCPOpened",
67
],
[
"prBNCPOpened",
68
],
[
"prLCPStateInitial",
69
],
[
"prLCPStateStarting",
70
],
[
"prLCPStateClosed",
71
],
[
"prLCPStateStopped",
72
],
[
"prLCPStateClosing",
73
],
[
"prLCPStateStopping",
74
],
[
"prLCPStateReqSent",
75
],
[
"prLCPStateAckRecd",
76
],
[
"prLCPStateAckSent",
77
],
[
"prIPXNCPOpened",
80
],
[
"prAtNcpOpened",
81
],
[
"prBACPOpening",
82
],
[
"prBACPOpened",
83
],
[
"prV110Up",
90
],
[
"prV110StateOpened",
91
],
[
"prV110StateCarrier",
92
],
[
"prV110StateReset",
93
],
[
"prV110StateClosed",
94
],
[
"prFRLinkInactive",
120
],
[
"prFRLinkActive",
121
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"State of the connection before disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise prNotApplicable(1) will be returned."
],
null,
null,
null,
null
]
}Module: ASCEND-EVENT-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'ASCEND-MIB': ['eventGroup'], 'RFC1155-SMI': ['IpAddress', 'Counter']}Status in source: mandatory.
Names: eventConnectProgress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"eventConnectProgress",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"prNotApplicable",
"(",
"1",
")",
",",
"prUnknown",
"(",
"2",
")",
",",
"prNotConnected",
"(",
"7",
")",
",",
"prCallUp",
"(",
"10",
")",
",",
"prDialSrvcBlocked",
"(",
"11",
")",
",",
"prModemUp",
"(",
"30",
")",
",",
"prModemWaitDCD",
"(",
"31",
")",
",",
"prModemWaitCodes",
"(",
"32",
")",
",",
"prTermSrvStarted",
"(",
"40",
")",
",",
"prRawTcpStarting",
"(",
"41",
")",
",",
"prTelnetStarting",
"(",
"42",
")",
",",
"prRawTcpConnect",
"(",
"43",
")",
",",
"prTelnetConnect",
"(",
"44",
")",
",",
"prRloginStarting",
"(",
"45",
")",
",",
"prRloginConnect",
"(",
"46",
")",
",",
"prTermSrvStartedThruCR",
"(",
"47",
")",
",",
"prModemOutdialCallUp",
"(",
"50",
")",
",",
"prLanSessionUp",
"(",
"60",
")",
",",
"prOpeningLCP",
"(",
"61",
")",
",",
"prOpeningCCP",
"(",
"62",
")",
",",
"prOpeningIPNCP",
"(",
"63",
")",
",",
"prOpeningBNCP",
"(",
"64",
")",
",",
"prLCPOpened",
"(",
"65",
")",
",",
"prCCPOpened",
"(",
"66",
")",
",",
"prIPNCPOpened",
"(",
"67",
")",
",",
"prBNCPOpened",
"(",
"68",
")",
",",
"prLCPStateInitial",
"(",
"69",
")",
",",
"prLCPStateStarting",
"(",
"70",
")",
",",
"prLCPStateClosed",
"(",
"71",
")",
",",
"prLCPStateStopped",
"(",
"72",
")",
",",
"prLCPStateClosing",
"(",
"73",
")",
",",
"prLCPStateStopping",
"(",
"74",
")",
",",
"prLCPStateReqSent",
"(",
"75",
")",
",",
"prLCPStateAckRecd",
"(",
"76",
")",
",",
"prLCPStateAckSent",
"(",
"77",
")",
",",
"prIPXNCPOpened",
"(",
"80",
")",
",",
"prAtNcpOpened",
"(",
"81",
")",
",",
"prBACPOpening",
"(",
"82",
")",
",",
"prBACPOpened",
"(",
"83",
")",
",",
"prCBCPOpening",
"(",
"84",
")",
",",
"prCBCPOpened",
"(",
"85",
")",
",",
"prV110Up",
"(",
"90",
")",
",",
"prV110StateOpened",
"(",
"91",
")",
",",
"prV110StateCarrier",
"(",
"92",
")",
",",
"prV110StateReset",
"(",
"93",
")",
",",
"prV110StateClosed",
"(",
"94",
")",
",",
"prClidCallBackReq",
"(",
"100",
")",
",",
"prClidAuthFailed",
"(",
"101",
")",
",",
"prClidAuthTimeout",
"(",
"102",
")",
",",
"prFRLinkInactive",
"(",
"120",
")",
",",
"prFRLinkActive",
"(",
"121",
")",
",",
"prStartingAuth",
"(",
"200",
")",
",",
"prOpeningAuth",
"(",
"201",
")",
",",
"prSkippingAuth",
"(",
"202",
")",
",",
"prAuthOpened",
"(",
"203",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"State of the connection before disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise prNotApplicable(1) will be returned.\"",
"::=",
"{",
"eventEntry",
"16",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"prNotApplicable",
1
],
[
"prUnknown",
2
],
[
"prNotConnected",
7
],
[
"prCallUp",
10
],
[
"prDialSrvcBlocked",
11
],
[
"prModemUp",
30
],
[
"prModemWaitDCD",
31
],
[
"prModemWaitCodes",
32
],
[
"prTermSrvStarted",
40
],
[
"prRawTcpStarting",
41
],
[
"prTelnetStarting",
42
],
[
"prRawTcpConnect",
43
],
[
"prTelnetConnect",
44
],
[
"prRloginStarting",
45
],
[
"prRloginConnect",
46
],
[
"prTermSrvStartedThruCR",
47
],
[
"prModemOutdialCallUp",
50
],
[
"prLanSessionUp",
60
],
[
"prOpeningLCP",
61
],
[
"prOpeningCCP",
62
],
[
"prOpeningIPNCP",
63
],
[
"prOpeningBNCP",
64
],
[
"prLCPOpened",
65
],
[
"prCCPOpened",
66
],
[
"prIPNCPOpened",
67
],
[
"prBNCPOpened",
68
],
[
"prLCPStateInitial",
69
],
[
"prLCPStateStarting",
70
],
[
"prLCPStateClosed",
71
],
[
"prLCPStateStopped",
72
],
[
"prLCPStateClosing",
73
],
[
"prLCPStateStopping",
74
],
[
"prLCPStateReqSent",
75
],
[
"prLCPStateAckRecd",
76
],
[
"prLCPStateAckSent",
77
],
[
"prIPXNCPOpened",
80
],
[
"prAtNcpOpened",
81
],
[
"prBACPOpening",
82
],
[
"prBACPOpened",
83
],
[
"prCBCPOpening",
84
],
[
"prCBCPOpened",
85
],
[
"prV110Up",
90
],
[
"prV110StateOpened",
91
],
[
"prV110StateCarrier",
92
],
[
"prV110StateReset",
93
],
[
"prV110StateClosed",
94
],
[
"prClidCallBackReq",
100
],
[
"prClidAuthFailed",
101
],
[
"prClidAuthTimeout",
102
],
[
"prFRLinkInactive",
120
],
[
"prFRLinkActive",
121
],
[
"prStartingAuth",
200
],
[
"prOpeningAuth",
201
],
[
"prSkippingAuth",
202
],
[
"prAuthOpened",
203
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"State of the connection before disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise prNotApplicable(1) will be returned."
],
null,
null,
null,
null
]
}Module: ASCEND-EVENT-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'ASCEND-MIB': ['eventGroup'], 'RFC1155-SMI': ['IpAddress', 'Counter']}Historical records
eventConnectProgress OBJECT-TYPE
SYNTAX INTEGER {
prNotApplicable(1),
prUnknown(2),
prCallUp(10),
prModemUp(30),
prModemWaitDCD(31),
prModemWaitCodes(32),
prTermSrvStarted(40),
prLanSessionUp(60),
prOpeningLCP(61),
prOpeningCCP(62),
prOpeningIPNCP(63),
prOpeningBNCP(64),
prLCPOpened(65),
prCCPOpened(66),
prIPNCPOpened(67),
prBNCPOpened(68),
prLCPStateInitial(69),
prLCPStateStarting(70),
prLCPStateClosed(71),
prLCPStateStopped(72),
prLCPStateClosing(73),
prLCPStateStopping(74),
prLCPStateReqSent(75),
prLCPStateAckRecd(76),
prLCPStateAckSent(77)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "State of the connection before disconnecting.
Applicable only if 'eventType' is callCleared(3)
otherwise prNotApplicable(1) will be returned."
::= { eventEntry 16 }
eventConnectProgress OBJECT-TYPE
SYNTAX INTEGER {
prNotApplicable(1),
prUnknown(2),
prNotConnected(7),
prCallUp(10),
prDialSrvcBlocked(11),
prModemUp(30),
prModemWaitDCD(31),
prModemWaitCodes(32),
prTermSrvStarted(40),
prRawTcpStarting(41),
prTelnetStarting(42),
prRawTcpConnect(43),
prTelnetConnect(44),
prRloginStarting(45),
prRloginConnect(46),
prTermSrvStartedThruCR(47),
prModemOutdialCallUp(50),
prLanSessionUp(60),
prOpeningLCP(61),
prOpeningCCP(62),
prOpeningIPNCP(63),
prOpeningBNCP(64),
prLCPOpened(65),
prCCPOpened(66),
prIPNCPOpened(67),
prBNCPOpened(68),
prLCPStateInitial(69),
prLCPStateStarting(70),
prLCPStateClosed(71),
prLCPStateStopped(72),
prLCPStateClosing(73),
prLCPStateStopping(74),
prLCPStateReqSent(75),
prLCPStateAckRecd(76),
prLCPStateAckSent(77),
prIPXNCPOpened(80),
prAtNcpOpened(81),
prBACPOpening(82),
prBACPOpened(83),
prCBCPOpening(84),
prCBCPOpened(85),
prV110Up(90),
prV110StateOpened(91),
prV110StateCarrier(92),
prV110StateReset(93),
prV110StateClosed(94),
prClidCallBackReq(100),
prClidAuthFailed(101),
prClidAuthTimeout(102),
prFRLinkInactive(120),
prFRLinkActive(121),
prStartingAuth(200),
prOpeningAuth(201),
prSkippingAuth(202),
prAuthOpened(203),
prH323NewIncomingCallFromWan(300),
prH323DetectingPinFromWan(301),
prH323DetectingDnisFromWan(302),
prH323SendingArqToGatekeeper(303),
prH323ReceivedAcfFromGatekeeper(304),
prH323WaitingH225AlertingFromLan(305),
prH323WaitingH225ProceedingFromLan(306),
prH323PlayingErrPromptToWan(307),
prH323HairpinDialingOutToWan(308),
prH323ReceivedH225SetupFromLan(309),
prH323DialingOutToWan(310),
prH323WanAnsweredAndRtpNotUpYet(311),
prH323CallConnected(312),
prH323PlayingBusyPromptToWan(313),
prH323DisconnectingRtp(314),
prH323RtpDisconnected(315),
prH323FaxDisconnected(316),
prSs7VoipChangeParameter(400),
prSs7VoipRtpOpened(401),
prSs7VoipRtpClosed(402),
prSs7VoipTerminateRtp(403),
prSs7VoipCedDetected(404)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "State of the connection before disconnecting.
Applicable only if 'eventType' is callCleared(3)
otherwise prNotApplicable(1) will be returned."
::= { eventEntry 16 }
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.10.4.1.1 | eventIdNumber | 0 | 0 | A unique number assigned to every event entry. Numbers are assigned incrementally starting with 1 and will wraparound if the uppe… |
| 1.3.6.1.4.1.529.10.4.1.2 | eventTimeStamp | 0 | 0 | The time of occurence for this event in seconds since startup. Use 'sysAbsoluteStartupTime' to convert to absolute time. |
| 1.3.6.1.4.1.529.10.4.1.3 | eventType | 0 | 0 | Identifies the type of event associated with this entry. For incoming MPP calls, the initial serviceChanged(4) event will be ppp(3… |
| 1.3.6.1.4.1.529.10.4.1.4 | eventCallReferenceNum | 0 | 0 | A unique number assigned to identify a particular session. The start of a session is marked by either a callOriginated(1) or a c… |
| 1.3.6.1.4.1.529.10.4.1.5 | eventDataRate | 0 | 0 | The receive data rate for ISDN calls or the baud rate for modem calls. Rate is given as bits-per-second. Applicable for all 'eve… |
| 1.3.6.1.4.1.529.10.4.1.6 | eventSlotNumber | 0 | 0 | Identifies the slot containing the line call was received or sent over. It's value ranges between 1 and the value slotNumber in t… |
| 1.3.6.1.4.1.529.10.4.1.7 | eventSlotLineNumber | 0 | 0 | Identifies the line for network slots. This variable is equivalent to slotItemIndex in Ascend's slot group. Applicable only if '… |
| 1.3.6.1.4.1.529.10.4.1.8 | eventSlotChannelNumber | 0 | 0 | Identifies the channel for the particular line identified by eventSlotLineNumber. Applicable only if 'eventType' is callOriginate… |
| 1.3.6.1.4.1.529.10.4.1.9 | eventModemSlotNumber | 0 | 0 | Identifies the modem slot on the device. It's value ranges between 0 and the value slotNumber in Ascend's slots group. A value … |
| 1.3.6.1.4.1.529.10.4.1.10 | eventModemOnSlot | 0 | 0 | Identifies the particular modem within a modem slot. A value of 0 indicates modems are not associated with this connection. Appl… |
| 1.3.6.1.4.1.529.10.4.1.11 | eventCurrentService | 0 | 0 | The current service provided to the remote user. Applicable only if 'eventType' is serviceChanged(4) or nameChanged(5) otherwise … |
| 1.3.6.1.4.1.529.10.4.1.12 | eventUserName | 0 | 0 | The name of the remote user. Applicable only if 'eventType' is serviceChanged(4) or nameChanged(5). The null string is returned i… |
| 1.3.6.1.4.1.529.10.4.1.13 | eventUserIPAddress | 0 | 0 | The IP address of the remote user or login host. Applicable only if 'eventType' is serviceChanged(4) nameChanged(5) or callCleare… |
| 1.3.6.1.4.1.529.10.4.1.14 | eventUserSubnetMask | 0 | 0 | The subnet mask of the remote user. Applicable only if 'eventType' is serviceChanged(4) or nameChanged(5). The value 0.0.0.0 is r… |
| 1.3.6.1.4.1.529.10.4.1.15 | eventDisconnectReason | 0 | 0 | Reason for call disconnecting. Applicable only if 'eventType' is callCleared(3) otherwise notApplicable(1) will be returned. |
| 1.3.6.1.4.1.529.10.4.1.17 | eventCallCharge | 0 | 0 | The call charge for this user. Applicable only if 'eventType' is callCleared( 3 ) otherwise 0 will be returned. A value of 0 is re… |
| 1.3.6.1.4.1.529.10.4.1.18 | eventCalledPartyID | 0 | 0 | The called party ID. Applicable only if 'eventType' is callCleared(3), callAnswered(2) or callOriginated(2) The null string is ret… |
| 1.3.6.1.4.1.529.10.4.1.19 | eventCallingPartyID | 0 | 0 | The calling party ID. Applicable only if 'eventType' is callCleared(3), callAnswered(2) or callOriginated(2) The null string is re… |
| 1.3.6.1.4.1.529.10.4.1.20 | eventInOctets | 0 | 0 | Identifies the total number of InOctets during this call. Applicable only if 'eventType' is callCleared(3), otherwise 0 will be re… |
| 1.3.6.1.4.1.529.10.4.1.21 | eventOutOctets | 0 | 0 | Identifies the total number of OutOctets during this call. Applicable only if 'eventType' is callCleared(3), otherwise 0 will be r… |
| 1.3.6.1.4.1.529.10.4.1.22 | eventMultiLinkID | 0 | 0 | MultiLinkID applies to sessions that are part of a Multilink bundle. Applicable if 'eventType' is callCleared(3), serviceChanged(… |
| 1.3.6.1.4.1.529.10.4.1.23 | eventXmitRate | 0 | 0 | The transmit data rate for ISDN calls or the baud rate for modem calls. Rate is given as bits-per-second. Applicable for all 'ev… |
| 1.3.6.1.4.1.529.10.4.1.24 | eventTrunkGroup | 0 | 0 | Trunk Group Number for outgoing call only Applicable only if 'eventType' is callEstablished or callOrignated, otherwise 0 will be r… |
| 1.3.6.1.4.1.529.10.4.1.25 | eventCallingNumberType | 0 | 0 | Type of ISDN number received in the Calling Party Number Information element. Note that callingNumberType is associated only with … |