Alphanumeric physical name for the input.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.534.6.6.7.3.3.1.12
Alphanumeric physical name for the input.
Identification
{1 3 6 1 4 1 534 6 6 7 3 3 1 12}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In EATON-EPDU-MIB, the row index consists of these components in order:
strappingIndex (Integer32): one numeric subidentifier for the non-negative value.inputIndex (Integer32): one numeric subidentifier for the non-negative value.inputCurrentIndex (Integer32): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.534.6.6.7.3.3.1.12.<strappingIndex>.<inputIndex>.<inputCurrentIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.534.6.6.7.3.3.1.12
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
inputPhaseDesignator OBJECT-TYPE
SYNTAX DisplayString (SIZE(2..4))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Alphanumeric physical name for the input."
::= { inputCurrentEntry 12 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Alphanumeric physical name for the input.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: inputPhaseDesignator
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"inputPhaseDesignator",
"OBJECT-TYPE",
"SYNTAX",
"DisplayString",
"(",
"SIZE",
"(",
"2",
".",
".",
"4",
")",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Alphanumeric physical name for the input.\"",
"::=",
"{",
"inputCurrentEntry",
"12",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"DisplayString",
[
"octetStringSubType",
[
[
2,
4
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Alphanumeric physical name for the input."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: EATON-EPDU-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'DisplayString'], 'EATON-OIDS': ['pduAgent'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Unsigned32', 'Integer32', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: EATON-EPDU-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DateAndTime', 'DisplayString'], 'EATON-OIDS': ['pduAgent'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'Counter32', 'Unsigned32', 'Integer32', 'enterprises'], 'SNMPv2-CONF': ['NOTIFICATION-GROUP', 'OBJECT-GROUP', 'MODULE-COMPLIANCE']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.534.6.6.7.3.3.1.1 | inputCurrentIndex | 0 | 0 | A unique value for each input current measurement. Its value ranges from 1 to inputCurrentCount. |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.2 | inputCurrentMeasType | 0 | 0 | Which input wire is being measured in this table row - single phase, neutral, phase 1, phase 2, or phase 3. |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.3 | inputCurrentCapacity | 0 | 0 | Rated current capacity of the input. A negative value indicates that the hardware current capacity is unknown. Units are milli… |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.4 | inputCurrent | 0 | 0 | An input current measurement value. Units are milliamps. |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.5 | inputCurrentThStatus | 0 | 0 | Status of the measured input current relative to the configured thresholds. |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.6 | inputCurrentThLowerWarning | 0 | 0 | Lower warning threshold. Units are milliamps. A value of -1 indicates that this object is not available for a particular ePDU … |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.7 | inputCurrentThLowerCritical | 0 | 0 | Lower critical threshold. Units are milliamps. A value of -1 indicates that this object is not available for a particular ePDU… |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.8 | inputCurrentThUpperWarning | 0 | 0 | Upper warning threshold. Units are milliamps. A value of -1 indicates that this object is not available for a particular ePDU … |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.9 | inputCurrentThUpperCritical | 0 | 0 | Upper critical threshold. Units are milliamps. A value of -1 indicates that this object is not available for a particular ePDU… |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.10 | inputCurrentCrestFactor | 0 | 0 | |
| 1.3.6.1.4.1.534.6.6.7.3.3.1.11 | inputCurrentPercentLoad | 0 | 0 |