Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"muismTargetRSSI",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"-",
"85",
".",
".",
"-",
"45",
")",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"ISM RF RSSI (in dBm). It specifies the target RSSI from the remote unit to the master unit. Based on this parameter, the master unit can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider master unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from remote unit shall be no less than -75dBm.\"",
"::=",
"{",
"muism",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
-85,
-45
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"ISM RF RSSI (in dBm). It specifies the target RSSI from the remote unit to the master unit. Based on this parameter, the master unit can power level the remote unit so that it receives same level of signal strength from the remote unit, regardless far or near. Note that when you set the Target RSSI from the remote unit, you need to consider master unit's RF Rx Threshold value. The Target RSSI from the remote unit must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from remote unit shall be no less than -75dBm."
],
null,
null,
null,
null
]
}