OID reference

setCoFltMode

1.3.6.1.4.1.601.3.1.1.3.12.2.1.4

Description

Set the signal fault mode for low level output signals off(1), -- will turn off the output and requires user issued command to turn it back on on(2), -- will not turn off when fault detected auto(3) -- will turn off the output and automatically turn back on when fault clears

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.601.3.1.1.3.12.2.1 (setCoEntry)
Node code
4
Node name
setCoFltMode
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.601.3.1.1.3.12.2.1.4
URN notation
urn:oid:1.3.6.1.4.1.601.3.1.1.3.12.2.1.4
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 601 3 1 1 3 12 2 1 4}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) datum(601) austron(3) products(1) ssu2000(1) msetup(3) setup2048Out(12) setCoTable(2) setCoEntry(1) setCoFltMode(4)}
OID-IRI notation
  • /1/3/6/1/4/1/601/3/1/1/3/12/2/1/4
  • /ISO/Identified-Organization/6/1/4/1/601/3/1/1/3/12/2/1/4
  • /ISO/3/6/1/4/1/601/3/1/1/3/12/2/1/4
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/identified-organization/dod/internet/private/enterprise/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/identified-organization/dod/internet/private/enterprises/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/identified-organization/dod/internet/private/enterprises/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/identified-organization/dod/internet/private/vendor-objects/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/identified-organization/dod/internet/private/vendor-objects/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/enterprise/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/enterprise/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/enterprises/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/enterprises/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/ldap-enterprise/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/ldap-enterprise/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/vendor-objects/601/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • /iso/org/dod/internet/private/vendor-objects/datum/austron/products/ssu2000/msetup/setup2048Out/setCoTable/setCoEntry/setCoFltMode
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Enumerated values

ValueName
1off
2on
3auto

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In SSU2000-MIB, the row index consists of these components in order:

  1. setCoChassis (INTEGER): one numeric subidentifier for the non-negative value.
  2. setCoSlot (INTEGER): one numeric subidentifier for the non-negative value.

An instance has the form .1.3.6.1.4.1.601.3.1.1.3.12.2.1.4.<setCoChassis>.<setCoSlot>. Use values present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.601.3.1.1.3.12.2.1.4

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

setCoFltMode OBJECT-TYPE
        SYNTAX  INTEGER
                {
                    off(1),
                    on(2),
                    auto(3)
                }
        MAX-ACCESS  read-write
        STATUS  current
        DESCRIPTION
            "Set the signal fault mode for low level output signals
            off(1), -- will turn off the output and requires user issued command to turn it back on
            on(2), -- will not turn off when fault detected
            auto(3) -- will turn off the output and automatically turn back on when fault clears
            "
    ::= { setCoEntry 4 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Set the signal fault mode for low level output signals off(1), -- will turn off the output and requires user issued command to turn it back on on(2), -- will not turn off when fault detected auto(3) -- will turn off the output and automatically turn back on when fault clears

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

setCoFltMode · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: setCoFltMode

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "setCoFltMode",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "off",
    "(",
    "1",
    ")",
    ",",
    "on",
    "(",
    "2",
    ")",
    ",",
    "auto",
    "(",
    "3",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Set the signal fault mode for low level output signals off(1), -- will turn off the output and requires user issued command to turn it back on on(2), -- will not turn off when fault detected auto(3) -- will turn off the output and automatically turn back on when fault clears \"",
    "::=",
    "{",
    "setCoEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "off",
            1
          ],
          [
            "on",
            2
          ],
          [
            "auto",
            3
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Set the signal fault mode for low level output signals off(1), -- will turn off the output and requires user issued command to turn it back on on(2), -- will not turn off when fault detected auto(3) -- will turn off the output and automatically turn back on when fault clears"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.601)

Fontes Joe

Siblings (5)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.601.3.1.1.3.12.2.1.1 setCoChassis00
1.3.6.1.4.1.601.3.1.1.3.12.2.1.2 setCoSlot00
1.3.6.1.4.1.601.3.1.1.3.12.2.1.3 setCoBypass00
1.3.6.1.4.1.601.3.1.1.3.12.2.1.5 setCoEnable00
1.3.6.1.4.1.601.3.1.1.3.12.2.1.6 setCoSquelch00