Status in source: current.
Names: dF10DcbxGlobalTraceLevel
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dF10DcbxGlobalTraceLevel",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - DCBX State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Failure Traces 6 - Configuration Exchange Traces 7 - Auto Detection Traces The remaining bits are unused. The user has to enter the corresponding INTEGER VALUE for the trace to be set. Only one trace can be enabled at a time. To enable all the traces, sum of all individual traces must be provided.\"",
"::=",
"{",
"dF10DCBXScalars",
"1",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable Trace Statements in DCBX Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer represents a particular level of Trace. The mapping between the bit positions & the level of trace is as follows: 1 - Management Traces 2 - DCBX State Machine Traces 3 - TLV Traces 4 - System Resource Traces 5 - Failure Traces 6 - Configuration Exchange Traces 7 - Auto Detection Traces The remaining bits are unused. The user has to enter the corresponding INTEGER VALUE for the trace to be set. Only one trace can be enabled at a time. To enable all the traces, sum of all individual traces must be provided."
],
null,
null,
null,
null
]
}