OID reference
1.3.6.1.4.1.6027.3.15.3.1.3.1.6
Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port.
Identification
{1 3 6 1 4 1 6027 3 15 3 1 3 1 6}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published AUGMENTS row variants: dF10DCBXPortEntry; dellNetDCBXPortEntry. Check that row's index definition for the instance suffix.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6027.3.15.3.1.3.1.6
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
dellNetDCBXPortMultiplePeerCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates number of times multiple peers were detected.
A duplicate peer is when more than one DCBX peer is
detected on a port."
::= { dellNetDCBXPortStatusEntry 6 }dF10DCBXPortMultiplePeerCount OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates number of times multiple peers were detected.
A duplicate peer is when more than one DCBX peer is
detected on a port."
::= { dF10DCBXPortStatusEntry 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: dellNetDCBXPortMultiplePeerCount
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dellNetDCBXPortMultiplePeerCount",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port.\"",
"::=",
"{",
"dellNetDCBXPortStatusEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Dell support.
Module: DELL-NETWORKING-DCB-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['Unsigned32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'Integer32'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'DELL-NETWORKING-SMI': ['dellNetMgmt']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: dF10DCBXPortMultiplePeerCount
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dF10DCBXPortMultiplePeerCount",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port.\"",
"::=",
"{",
"dF10DCBXPortStatusEntry",
"6",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Indicates number of times multiple peers were detected. A duplicate peer is when more than one DCBX peer is detected on a port."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: DF10-DCB-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue', 'MacAddress'], 'SNMPv2-SMI': ['Unsigned32', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'Integer32'], 'FORCE10-SMI': ['f10Mgmt'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.2 | dF10DCBXPortOperVersion, dellNetDCBXPortOperVersion | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.3 | dF10DCBXPortPeerMACaddress, dellNetDCBXPortPeerMACaddress | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.4 | dF10DCBXPortCfgSource, dellNetDCBXPortCfgSource | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.5 | dF10DCBXOperStatus, dellNetDCBXOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.7 | dF10DCBXPortPeerRemovedCount, dellNetDCBXPortPeerRemovedCount | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.8 | dF10DCBXPortPeerOperVersionNum, dellNetDCBXPortPeerOperVersionNum | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.9 | dF10DCBXPortPeerMaxVersion, dellNetDCBXPortPeerMaxVersion | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.10 | dF10DCBXPortSeqNum, dellNetDCBXPortSeqNum | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.11 | dF10DCBXPortAckNum, dellNetDCBXPortAckNum | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.12 | dF10DCBXPortPeerRcvdAckNum, dellNetDCBXPortPeerRcvdAckNum | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.13 | dF10DCBXPortTxCount, dellNetDCBXPortTxCount | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.14 | dF10DCBXPortRxCount, dellNetDCBXPortRxCount | 0 | 0 | |
| 1.3.6.1.4.1.6027.3.15.3.1.3.1.15 | dF10DCBXPortErrorFramesCount, dellNetDCBXPortErrorFramesCount | 0 | 0 |