OID reference
1.3.6.1.4.1.6027.3.24.2.1.2.1.13
The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC.
Identification
{1 3 6 1 4 1 6027 3 24 2 1 2 1 13}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 64 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In F10-BPSTATS-MIB, the row index consists of these components in order:
bpIfStatsStackUnitIndex (INTEGER): one numeric subidentifier for the non-negative value.bpIfStatsPortPipe (INTEGER): one numeric subidentifier for the non-negative value.bpIfStatsPortIndex (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.6027.3.24.2.1.2.1.13.<bpIfStatsStackUnitIndex>.<bpIfStatsPortPipe>.<bpIfStatsPortIndex>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6027.3.24.2.1.2.1.13
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
bpIfStatsInCRC OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of frames received that had
a length (excluding framing bits, but including
FCS octets) of between 64 and 1518 octets,
inclusive, but had a bad CRC."
::= { bpIfStatsEntry 13 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Dell MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: bpIfStatsInCRC
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"bpIfStatsInCRC",
"OBJECT-TYPE",
"SYNTAX",
"Counter64",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC.\"",
"::=",
"{",
"bpIfStatsEntry",
"13",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter64"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: F10-BPSTATS-MIB
See published definition above
{'SNMPv2-TC': ['TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Integer32', 'Unsigned32', 'Gauge32'], 'FORCE10-SMI': ['f10Mgmt']}Related source files and packages:
Vendor MIB copy from the LibreNMS archive. Dell support.
Module: DELL-NETWORKING-BPSTATS-MIB
{'SNMPv2-TC': ['TimeStamp'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'Counter64', 'Integer32', 'Unsigned32', 'Gauge32'], 'DELL-NETWORKING-SMI': ['dellNetMgmt']}Related source files and packages:
Same file in Observium Community.
Registration