OID reference
1.3.6.1.4.1.6321.1.2.3.1.8.2.3.18
Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. This is the largest individual power reduction allowed in the L2 power mode. For CTLM solution, the …
Identification
{1 3 6 1 4 1 6321 1 2 3 1 8 2 3 18}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.6321.1.2.3.1.8.2.3.18.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
adslL2ATPRForBatchSet OBJECT-TYPE
SYNTAX INTEGER
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set the maximum Aggregate Transmit Power Reduction (ATPR)
in decibels (dB) that is permitted in a L2 power reduction.
The system can gradually decrease the ADSL line transmission power
while it is in the L2 power mode. This is the largest individual
power reduction allowed in the L2 power mode.
For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB)."
::= { adslPortBatchSet 18 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. This is the largest individual power reduction allowed in the L2 power mode. For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB).
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: adslL2ATPRForBatchSet
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"adslL2ATPRForBatchSet",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"UNITS",
[
"literal",
"22644222"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. This is the largest individual power reduction allowed in the L2 power mode. For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB).\"",
"::=",
"{",
"adslPortBatchSet",
"18",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
[
"UNITS",
"dB"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Set the maximum Aggregate Transmit Power Reduction (ATPR) in decibels (dB) that is permitted in a L2 power reduction. The system can gradually decrease the ADSL line transmission power while it is in the L2 power mode. This is the largest individual power reduction allowed in the L2 power mode. For CTLM solution, the range is 1 ~ 5(dB); for BCM solution, the range is 0 ~ 15(dB)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: E5-110-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['MacAddress', 'Timeout', 'BridgeId', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Counter32', 'Gauge32', 'Unsigned32', 'Counter64', 'IpAddress', 'TimeTicks', 'NOTIFICATION-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ifIndex'], 'P-BRIDGE-MIB': ['dot1dTrafficClass'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanIndex']}Related source files and packages:
Same file in Observium Community.
Registration