OID reference
1.3.6.1.4.1.6321.1.2.3.2.8.2.3.17
Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535.
Identification
{1 3 6 1 4 1 6321 1 2 3 2 8 2 3 17}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.6321.1.2.3.2.8.2.3.17.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
adslL2TimeForBatchSet OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set minimum time in seconds that the ADSL line
must stay in the L2 power mode before reducing the power
again in the L2 power mode.
For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535."
::= { adslPortBatchSet 17 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: adslL2TimeForBatchSet
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"adslL2TimeForBatchSet",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535.\"",
"::=",
"{",
"adslPortBatchSet",
"17",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Set minimum time in seconds that the ADSL line must stay in the L2 power mode before reducing the power again in the L2 power mode. For CTLM solution, the range is 60 ~ 65535; for BCM solution, the range is 10 ~ 65535."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: E5-111-MIB
See published definition above
{'SNMPv2-TC': ['RowStatus', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['Timeout', 'BridgeId', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Counter32', 'Gauge32', 'Unsigned32', 'Counter64', 'IpAddress', 'TimeTicks', 'NOTIFICATION-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ifIndex'], 'P-BRIDGE-MIB': ['dot1dTrafficClass'], 'Q-BRIDGE-MIB': ['VlanIndex', 'PortList', 'dot1qVlanIndex']}Related source files and packages:
Same file in Observium Community.
Registration