Description 1
Maximum burst kbytes.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.6339.100.11.1.5.1.4
Maximum burst kbytes.
Identification
{1 3 6 1 4 1 6339 100 11 1 5 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | drop | 2 |
| 2 | policeDscpTransmit | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: qosAggPolicerName.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6339.100.11.1.5.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
qosAggPolicerMaximumBurstKbps OBJECT-TYPE
SYNTAX INTEGER(1..1000000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum burst kbytes."
::= { qosAggPolicerEntry 4 }qosAggPolicerExceedAction OBJECT-TYPE
SYNTAX INTEGER
{
drop(1),
policeDscpTransmit(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"exceed-action drop means drop packets when specified speed is exceeded;
exceed-action policed-dscp-transmit specifies to mark down packet DSCP value
according to policed-dscp mapping when specified speed is exceeded."
::= { qosAggPolicerEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Maximum burst kbytes.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
exceed-action drop means drop packets when specified speed is exceeded; exceed-action policed-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is exceeded.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: qosAggPolicerMaximumBurstKbps
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"qosAggPolicerMaximumBurstKbps",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1",
".",
".",
"1000000",
")",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"Maximum burst kbytes.\"",
"::=",
"{",
"qosAggPolicerEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1,
1000000
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Maximum burst kbytes."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: DCN-MIB
See published definition above
{'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Counter64', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DCN-MIB
Same published definition (formatting differs; exact original is in the source file)
{'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Counter64', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Status in source: current.
Names: qosAggPolicerExceedAction
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"qosAggPolicerExceedAction",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"drop",
"(",
"1",
")",
",",
"policeDscpTransmit",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-create",
"STATUS",
"current",
"DESCRIPTION",
"\"exceed-action drop means drop packets when specified speed is exceeded; exceed-action policed-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is exceeded.\"",
"::=",
"{",
"qosAggPolicerEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"drop",
1
],
[
"policeDscpTransmit",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-create"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"exceed-action drop means drop packets when specified speed is exceeded; exceed-action policed-dscp-transmit specifies to mark down packet DSCP value according to policed-dscp mapping when specified speed is exceeded."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: AMER-MIB
See published definition above
{'RFC-1215': ['TRAP-TYPE'], 'RMON2-MIB': ['TimeFilter'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6339.100.11.1.5.1.1 | qosAggPolicerName | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.2 | qosAggPolicerRateKbps | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.3 | qosAggPolicerNormalBurstKbps, qosAggPolicerRurstKbps | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.5 | qosAggPolicerPeakKbps, qosAggPolicerStatus | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.6 | qosAggPolicerConformAction | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.7 | qosAggPolicerConformActionChangeValue | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.8 | qosAggPolicerExceedAction | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.9 | qosAggPolicerViolateAction | 0 | 0 | |
| 1.3.6.1.4.1.6339.100.11.1.5.1.10 | qosAggPolicerStatus | 0 | 0 |