OID reference
1.3.6.1.4.1.6339.100.3.2.1.7
The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith.
Identification
{1 3 6 1 4 1 6339 100 3 2 1 7}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | ingress | 1, 2 |
| 1 | egress | 1 |
| 1 | engress | 2 |
| 2 | both | 1, 2 |
| 3 | none | 1, 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In DCN-MIB, the row index portIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.6339.100.3.2.1.7.<portIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
Published row index: portIndex.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.6339.100.3.2.1.7
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 3 distinct definitions; some records may not include a definition.
bandwidthControlStatus OBJECT-TYPE
SYNTAX INTEGER
{
ingress(0),
egress(1),
both(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth-control status of the port.
Its functionality is to stop the bandwidth control.
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith."
::= { priPortEntry 7 }bandwidthControlStatus OBJECT-TYPE
SYNTAX INTEGER
{
ingress(0),
egress(1),
both(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth-control status of the port.
Its functionality is to stop the bandwidth control.
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith."
::= { priPortEntry 7 }bandwidthControlStatus OBJECT-TYPE
SYNTAX INTEGER
{
ingress(0),
engress(1),
both(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bandwidth-control status of the port.
Its functionality is to stop the bandwidth control.
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith."
::= { priPortEntry 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: bandwidthControlStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"bandwidthControlStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"ingress",
"(",
"0",
")",
",",
"egress",
"(",
"1",
")",
",",
"both",
"(",
"2",
")",
",",
"none",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith.\"",
"::=",
"{",
"priPortEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"ingress",
0
],
[
"egress",
1
],
[
"both",
2
],
[
"none",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: DCN-MIB
See published definition above
{'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Counter64', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: DCN-MIB
See published definition above
{'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Counter64', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Status in source: current.
Names: bandwidthControlStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"bandwidthControlStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"ingress",
"(",
"0",
")",
",",
"engress",
"(",
"1",
")",
",",
"both",
"(",
"2",
")",
",",
"none",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith.\"",
"::=",
"{",
"priPortEntry",
"7",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"ingress",
0
],
[
"engress",
1
],
[
"both",
2
],
[
"none",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The bandwidth-control status of the port. Its functionality is to stop the bandwidth control. The only way to enable bandwidth control is to set receiveBandwidth or transmitBandwith."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: AMER-MIB
See published definition above
{'RFC-1215': ['TRAP-TYPE'], 'RMON2-MIB': ['TimeFilter'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Registration