Status in source: unspecified.
Technical details
{
"smi_kind": "MODULE-IDENTITY",
"definition": [
"pegasusMibModule",
"MODULE-IDENTITY",
"LAST-UPDATED",
[
"literal",
"223230303431323137303030305a22"
],
"ORGANIZATION",
"\"Schmid Telecom, Zurich\"",
"CONTACT-INFO",
"\"Schmid Telecom AG Binzstrasse 35, CH-8048 Zurich Switzerland Email: xdslsupport@schmid-telecom.ch\"",
"DESCRIPTION",
"\"This MIB applies to the PEGASUS SDSL product manufactured by Schmid Telecom Zurich. The MIB is modelled after the PEM management model, so object hierarchy and individual variables agree with the PEM client. The overall structure is five groups, one for each of DSL, V5 and Data cards, one with global parameters for the whole rack, and finally one group for performance history measurement. The DSL group contains four tables: - dslCardTable one entry for each DSL card (line card) configured. - dslLinkTable one entry for each DSL link. - dslInterfaceTable one entry per DSL interface, i.e. two per DSL link. - iadTable one entry per DSL link. - dslLinkCosTable one entry per DSL link. The V5 group contains five tables: - v5CardTable one entry for each V5 card configured. - v5LinkTable one entry for each V5 link. - v5InterfaceTable one entry for each V5 interface. - v5IsdnPortTable one entry per ISDN User Port (S0 interface on IAD). - v5LccTable one entry per Logical Communication Channel. The data switch group contains two tables: - dataCardTable one entry per data card (normally one) - dataPortTable one entry per trunk interface. The Pegasus System group contains individual variables related to the rack as a whole. The perf group for performance histories contains two tables and one extra variable: - perfSweeperCyclePeriod how soon are unused perfDataTable entries cleared - perfControlTable configuration of performance history monitoring - perfDataTable performance history registers Note - Notification definitions are singled out to their own MIB, to allow for alternative sets of notification styles. - Tables in this MIB are indexed hierarchically with physical attributes. E.g. all cards are indexed by the slot number. DSL links are indexed by two variables: first the slot number of the DSL card which carries the link, then the number of the link within that card. - Unlike the PEM client, this MIB does not model V5 Physical Communication Channels explicitely. They have no interesting variables of their own. Rather, the user allots a range of these objects through the V5 link configuration, and then maps the Logical Communication Channels to them (using indexes within the alloted range, of course). These objects are then created, deleted and managed under the hood. - V5 interfaces are logical entities, unlike DSL interfaces. - ISDN user ports are physically part of the IAD, and are indexed by DSL attributes. Their configuration, though, belongs to V5, so the user port tables are in the V5 group, not in the DSL group.\"",
"REVISION",
[
"literal",
"223230303431323137303030305a22"
],
"DESCRIPTION",
"\"A new table dslLinkCosTable has been added to the dsl branch to allow the configuration of the Class of Service (COS) attributes. Each row within this table corresponds to a DSL link. Besides, some missing type and variable descriptions have been added.\"",
"REVISION",
[
"literal",
"223230303430363134303030305a22"
],
"DESCRIPTION",
"\"Line identifiers are have been added for ISDN user ports and V5 links.\"",
"REVISION",
[
"literal",
"223230303430343038303030305a22"
],
"DESCRIPTION",
"\"Maximum size of dslLinkAddress and trapDestination have been increased.\"",
"REVISION",
[
"literal",
"223230303331323131303030305a22"
],
"DESCRIPTION",
"\"Improved the description of DslLinkLoopEnum. The variables v5IsdnPortActiveLoop and authRespEnabled are now obsolete. The agent never sends an error message if the request contains a wrong community string.\"",
"REVISION",
[
"literal",
"223230303331303330303030305a22"
],
"DESCRIPTION",
"\"Corrected the value range of perfSweepCyclePeriod. The new maximum value is 604800 seconds (1 week).\"",
"REVISION",
[
"literal",
"223230303331303234303030305a22"
],
"DESCRIPTION",
"\"Declared perfControlEffectiveUpdatePeriod as obsolete. The definition would be now redundant to perfControlUpdatePeriod. The behaviour of v5LccPccV5LinkNumber/v5LccPccTimeslot has been modified. The assignment of a PCC becomes active after both attributes have been set. To erase the PCC, only one of these attributes has to be set to 0. Write access is allowed for RowStatus active now. The comments of attributes and table habe been aapted.\"",
"REVISION",
[
"literal",
"223230303331303032303030305a22"
],
"DESCRIPTION",
"\"Declared hwAdaptionPolicy as obsolete. The definition of DataPortSpeedEnum and DataPortFlowConrtolEnum has been moved within the MIB file to make possible the compilation without errors using the MG-Soft MIB Compiles. This revision of the MIB is compatible with the preceeding revision.\"",
"REVISION",
[
"literal",
"223230303330333134303030305a22"
],
"DESCRIPTION",
"\"Deleted all IP base address objects: dslCardIPBaseAddress, dataCardIPBaseAddress, and v5CardIPBaseAddress. The base address of a card can no longer be set through Pegasus Management, but only through the CLI on the card itself. The remaining objects were renumbered to keep the numbering compact, so this revision of the MIB is again NOT COMPATIBLE with preceeding revisions! Changed the type of perfControlIndex and perfDataIndex from INTEGER to Integer32, with range (1..2147483647), which is the set of positive values possible for an Integer32. This change is rather formal (Integer32 is indistinguishable from INTEGER, as SNMPv2-SMI puts it, that is, its serialisation is identical to INTEGER), but it makes certain parsers happy. In fact, the value is always chosen by the client, and the agent gladly takes what it gets - including 0 and negative values.\"",
"REVISION",
[
"literal",
"223230303330333131303030305a22"
],
"DESCRIPTION",
"\"Deleted all config version objects: dslCardConfigVersion, v5CardConfigVersion, and dataCardConfigVersion. These objects were never really useful for customers, and so have been removed. Objects following them were renumbered, so this revision of the MIB is NOT COMPATIBLE with preceeding revisions! Added new literals at end of DataPortSpeedEnum and DataPortFlowControlEnum to convey that the value of a (read-only) status variable is currently unknown (for example because a sub-device like the Iad cannot be queried because is not connected). Added four new objects to the Iad table, to describe configuration and corresponding status of the Ethernet port on the Iad. This was mandated by the Iad Rev. B, which can control its Ethernet port and also report its status. For the older Iad Rev. B, control and status of the Ethernet port are not available, and the new objects will read with fixed values. The objects are: iadEthPortSpeed, iadEthCurrentPortSpeed, iadEthFlowControl, iadEthCurrentFlowControl.\"",
"REVISION",
[
"literal",
"223230303231303039303030305a22"
],
"DESCRIPTION",
"\"SignalQuality and Attenuation were prefixed with dslLink in dslInterfaceEntry sequence, changed to dslInterface. Type DslLinkNumber was defined as 1..8, but V5 configurations already hold user port parameters for future DSL cards with 16 DSL links. This caused problems with some clients, so the definition was changed to 1..16. Revamped description of writeCommunity.\"",
"REVISION",
[
"literal",
"223230303230393139303030305a22"
],
"DESCRIPTION",
"\"The following objects were added or changed: dataPortSpeed New literal autoCrossoverAndPortSpeed(1) was added to type DataPortSpeedEnum. Warning: existing literals have changed their ordinal numbers. Revamped description, added reference. v5CardFlags Four new objects added to table v5CardTable, and v5CardETSIRelease the new type V5CardFlagSet. v5CardE1LineCode v5CardFrameFormat v5LinkAlarmStatus New literal v5LinkAlarmIdFailure(6) was added to type V5LinkAlarmStatusElem (at the end, without changing the ordinal numbers of existing literals). iadAlarmStatus New literal dcContinuity(2) was added to type IadAlarmStatusElem (at the end, without changing the ordinal numbers of existing literals). dslInterfaceSignalQuality Three new objects added to dslInterfaceTable. dslInterfaceAttenuation v5InterfaceAlarmStatus\"",
"REVISION",
[
"literal",
"223230303230383233303030305a22"
],
"DESCRIPTION",
"\"Fixed a number of typos and formatting problems. Renamed l2 group to data group. (Input from BBe).\"",
"REVISION",
[
"literal",
"223230303230373136303030305a22"
],
"DESCRIPTION",
"\"Changed all type assignments with BITS to textual conventions (BITS is part of the OBJECT-TYPE and TEXTUAL-CONVENTION macros (for SMI v2 only), but not a ASN.1 builtin or DefinedType, and so cannot be used in a type assignment or sequence definition). The types are: AvailabilityStatusElem, DslLinkAlarmElem, DslCardAlarmStatus, IadAlarmStatusElem, DslPerformanceStatusElem, V5LinkAlarmStatusElem, V5IsdnPortAlarmStatusElem, RackAlarmStatusElem, PerfControlStatus. Added import clause for TEXTUAL-CONVENTION. Changed dataCardAvailabilityStatus in DataCardEntry from BITS to AvailabilityStatusElem. Changed spelling bit-names of AvailabilityStatusElem to agree with ASN.1 definitions in X.721. Added description for the AvailabilityStatusElem textual convention (taken from attributes, with updates). In v5CardTable and v5LccTable, changed all read-write access clauses to read-create. Improved list of references in initial comment. Added list of tools tested with this MIB to initial comment. Constrained type Priority to (0..7). Constrained dslLinkNumberOfZBits to (0..1).\"",
"REVISION",
[
"literal",
"223230303230373033303030305a22"
],
"DESCRIPTION",
"\"dslLinkAssignedTrunk was TrunkNumber in its Object-Type definition, fixed to TrunkNumberOrZero. For dslCardIPBaseAddress, v5CardIPBaseAddress and dataCardIPBaseAddress: corrected descriptions and examples to have plausible slot-numbers. ipBaseAddress adapted, with general examples.\"",
"REVISION",
[
"literal",
"223230303230363234303030305a22"
],
"DESCRIPTION",
"\"User manual realignment with syntax errors fixed, raw version.\"",
"REVISION",
[
"literal",
"223230303230363230303030305a22"
],
"DESCRIPTION",
"\"Changed all ...IPAddressPrefix variable names to ...IPBaseAddress (dslCard, v5Card, dataCard, pegasusSystem. Changed the variable in pegasusSystem from DisplayString to IpAddress, to agree with other variables. Renamed dataCardAlarmStatus to rackAlarmStatus (also renamed the associated BITS type to RackAlarmStatusElem). Moved to pegasusSystem. Renamed dslLinkAssociatedTrunk to dslLinkAssignedTrunk, to realign with PEMClient. Eliminated type DataPortNumber, used TrunkNumber in its place. Also created type TrunkNumberOrZero, to allow reference to 'no trunk'. Renamed ...ProgramVersion to ...FirmwareVersion: dslCard, dslCardM16, iad, v5Card, dataCard. Removed dataPortVLAN (and its type VLanId): is automatically computed as part of the enhanced switching configuration. For future general VLAN switching, it will be configured through standard MIBs. Removed FilterBroadcast and FilterUnknown for both dslLink and dataPort: present in the devices, but not in the PEMClient. It was not clear if these are useful, and according to PSt it was decided to 'hide' them. Removed special(4) from DslLinkLoopEnum - no longer supported.\"",
"REVISION",
[
"literal",
"223230303230363037303030305a22"
],
"DESCRIPTION",
"\"Removed ProceduralStatus and its enumeration type from all three cards and IAD. Fixed spelling of 'v5LccIsProteced' to 'v5LccIsProtected'. Improved various descriptions.\"",
"REVISION",
[
"literal",
"223230303230353232303030305a22"
],
"DESCRIPTION",
"\"Changed Gauge32 in perfData to Integer32, removed import for Gauge32. Added description for v5CardRowStatus.\"",
"REVISION",
[
"literal",
"223230303230353130303030305a22"
],
"DESCRIPTION",
"\"Improved descriptions for dslLink{DataRate,LinkRate,NumberOfBRA} and dslLinkDynamicSlotAllocation. Added 6 remaining objects for SNMP configuration to group pegasusSystem (read/write/trapCommunity, agentPort, authRespEnabled, trapDestination). Improved description of objects in perf group. DslCard, dataCard: removed AdminState, renumbered attributes contiguously. v5Lcc: renumbered objects contiguously, starting at 1. v5Interface: added RowStatus, changed all read-write objects to read-create, renumbered objects contigously, starting at 1. v5Link: added RowStatus, changed all read-write objects to read-create. iad: removed AdminState, renumbered attributes contiguously.\"",
"REVISION",
[
"literal",
"223230303230343235303030305a22"
],
"DESCRIPTION",
"\"Added group for performance history of V5 links and DSL interfaces. Added description for dslLinkNumberOfBRA, dslLinkDataRate, and dslLinkLineRate.\"",
"REVISION",
[
"literal",
"223230303230343136303030305a22"
],
"DESCRIPTION",
"\"Changed numbering scheme. { schmidtelecom 1 } is now reserved for a centralized registry, and the pegasusMibModule is { schmidtelecom 2 }. All groups and objects in this and other Pegasus MIBs are below pegasusMibModule.\"",
"REVISION",
[
"literal",
"223230303230343033303030305a22"
],
"DESCRIPTION",
"\"v5CardTable and V5LccTable (LogCommChan) now have a RowStatus. For v5CardTable, this controls provisioning mode, but it does not yet support creation. For v5LccTable, it controls verification of the v5LccPccV5LinkNumber and and v5LccPccTimeslot columns, which define the Pcc (PhysCommChan) (i.e. the RowStatus supports transactions on these values). Again, creation is not yet supported for v5LccTable. The new object mibRevision holds the revision number of the MIB with which the agent was compiled.\"",
"REVISION",
[
"literal",
"223230303230333139303030305a22"
],
"DESCRIPTION",
"\"Added missing import of DisplayString. Changed definitions of dslInterface counter values to Counter32 consistently. Added one missing variable to V5IsdnPortEntry sequence.\"",
"REVISION",
[
"literal",
"223230303230333134303030305a22"
],
"DESCRIPTION",
"\"Initial comments updated and moved to the module description, where they are more useful for typical browsers.\"",
"REVISION",
[
"literal",
"223230303230333031303030305a22"
],
"DESCRIPTION",
"\"Added PegasusSystem.\"",
"REVISION",
[
"literal",
"223230303230323238303030305a22"
],
"DESCRIPTION",
"\"Removed dslInterfaceIsRestartEnabled. Renumbered dslInterfaceEntry and dslLinkEntry columns to start with one and form a compact sequence.\"",
"REVISION",
[
"literal",
"223230303230323138303030305a22"
],
"DESCRIPTION",
"\"Added initial comment with overview and additional hints. Corrected spelling of CommStateEnum literals to comply with SNMPv2 (dashes were replaced by mixed-case spelling). Added VLAN support (DSL link and data card port). Presently only for enhanced mode, transparent and VLAN modes to come. Removed some VLAN related definitions which are not yet used.\"",
"REVISION",
[
"literal",
"223230303230323134303030305a22"
],
"DESCRIPTION",
"\"Added definitions for data switch and data switch port.\"",
"REVISION",
[
"literal",
"223230303230313235303030305a22"
],
"DESCRIPTION",
"\"Added object-type definition of v5IsdnPortAlarmStatus. Renumbered remaining objects.\"",
"REVISION",
[
"literal",
"223230303230313233303030305a22"
],
"DESCRIPTION",
"\"Changed all occurrences of NetworkAddress to IpAddress (imported from SNMPv2-SMI). NetworkAddress was in SNMPv1, but was replaced by IpAddress for SNMPv2. Corrected dataCardVLANMode to SYNTAX TruthValue - it erronously used NetworkAddress. Correct the year on the previous revision clause.\"",
"REVISION",
[
"literal",
"223230303031323231303030305a22"
],
"DESCRIPTION",
"\"Initial revision.\"",
"::=",
"{",
"schmidtelecom",
"2",
"}"
],
"syntax_tree": [
[
"LAST-UPDATED",
"200412170000Z"
],
[
"ORGANIZATION",
"Schmid Telecom, Zurich"
],
[
"CONTACT-INFO",
"Schmid Telecom AG Binzstrasse 35, CH-8048 Zurich Switzerland Email: xdslsupport@schmid-telecom.ch"
],
[
"DESCRIPTION",
"This MIB applies to the PEGASUS SDSL product manufactured by Schmid Telecom Zurich. The MIB is modelled after the PEM management model, so object hierarchy and individual variables agree with the PEM client. The overall structure is five groups, one for each of DSL, V5 and Data cards, one with global parameters for the whole rack, and finally one group for performance history measurement. The DSL group contains four tables: - dslCardTable one entry for each DSL card (line card) configured. - dslLinkTable one entry for each DSL link. - dslInterfaceTable one entry per DSL interface, i.e. two per DSL link. - iadTable one entry per DSL link. - dslLinkCosTable one entry per DSL link. The V5 group contains five tables: - v5CardTable one entry for each V5 card configured. - v5LinkTable one entry for each V5 link. - v5InterfaceTable one entry for each V5 interface. - v5IsdnPortTable one entry per ISDN User Port (S0 interface on IAD). - v5LccTable one entry per Logical Communication Channel. The data switch group contains two tables: - dataCardTable one entry per data card (normally one) - dataPortTable one entry per trunk interface. The Pegasus System group contains individual variables related to the rack as a whole. The perf group for performance histories contains two tables and one extra variable: - perfSweeperCyclePeriod how soon are unused perfDataTable entries cleared - perfControlTable configuration of performance history monitoring - perfDataTable performance history registers Note - Notification definitions are singled out to their own MIB, to allow for alternative sets of notification styles. - Tables in this MIB are indexed hierarchically with physical attributes. E.g. all cards are indexed by the slot number. DSL links are indexed by two variables: first the slot number of the DSL card which carries the link, then the number of the link within that card. - Unlike the PEM client, this MIB does not model V5 Physical Communication Channels explicitely. They have no interesting variables of their own. Rather, the user allots a range of these objects through the V5 link configuration, and then maps the Logical Communication Channels to them (using indexes within the alloted range, of course). These objects are then created, deleted and managed under the hood. - V5 interfaces are logical entities, unlike DSL interfaces. - ISDN user ports are physically part of the IAD, and are indexed by DSL attributes. Their configuration, though, belongs to V5, so the user port tables are in the V5 group, not in the DSL group."
],
[
"Revisions",
[
[
"200412170000Z",
[
"DESCRIPTION",
"A new table dslLinkCosTable has been added to the dsl branch to allow the configuration of the Class of Service (COS) attributes. Each row within this table corresponds to a DSL link. Besides, some missing type and variable descriptions have been added."
]
],
[
"200406140000Z",
[
"DESCRIPTION",
"Line identifiers are have been added for ISDN user ports and V5 links."
]
],
[
"200404080000Z",
[
"DESCRIPTION",
"Maximum size of dslLinkAddress and trapDestination have been increased."
]
],
[
"200312110000Z",
[
"DESCRIPTION",
"Improved the description of DslLinkLoopEnum. The variables v5IsdnPortActiveLoop and authRespEnabled are now obsolete. The agent never sends an error message if the request contains a wrong community string."
]
],
[
"200310300000Z",
[
"DESCRIPTION",
"Corrected the value range of perfSweepCyclePeriod. The new maximum value is 604800 seconds (1 week)."
]
],
[
"200310240000Z",
[
"DESCRIPTION",
"Declared perfControlEffectiveUpdatePeriod as obsolete. The definition would be now redundant to perfControlUpdatePeriod. The behaviour of v5LccPccV5LinkNumber/v5LccPccTimeslot has been modified. The assignment of a PCC becomes active after both attributes have been set. To erase the PCC, only one of these attributes has to be set to 0. Write access is allowed for RowStatus active now. The comments of attributes and table habe been aapted."
]
],
[
"200310020000Z",
[
"DESCRIPTION",
"Declared hwAdaptionPolicy as obsolete. The definition of DataPortSpeedEnum and DataPortFlowConrtolEnum has been moved within the MIB file to make possible the compilation without errors using the MG-Soft MIB Compiles. This revision of the MIB is compatible with the preceeding revision."
]
],
[
"200303140000Z",
[
"DESCRIPTION",
"Deleted all IP base address objects: dslCardIPBaseAddress, dataCardIPBaseAddress, and v5CardIPBaseAddress. The base address of a card can no longer be set through Pegasus Management, but only through the CLI on the card itself. The remaining objects were renumbered to keep the numbering compact, so this revision of the MIB is again NOT COMPATIBLE with preceeding revisions! Changed the type of perfControlIndex and perfDataIndex from INTEGER to Integer32, with range (1..2147483647), which is the set of positive values possible for an Integer32. This change is rather formal (Integer32 is indistinguishable from INTEGER, as SNMPv2-SMI puts it, that is, its serialisation is identical to INTEGER), but it makes certain parsers happy. In fact, the value is always chosen by the client, and the agent gladly takes what it gets - including 0 and negative values."
]
],
[
"200303110000Z",
[
"DESCRIPTION",
"Deleted all config version objects: dslCardConfigVersion, v5CardConfigVersion, and dataCardConfigVersion. These objects were never really useful for customers, and so have been removed. Objects following them were renumbered, so this revision of the MIB is NOT COMPATIBLE with preceeding revisions! Added new literals at end of DataPortSpeedEnum and DataPortFlowControlEnum to convey that the value of a (read-only) status variable is currently unknown (for example because a sub-device like the Iad cannot be queried because is not connected). Added four new objects to the Iad table, to describe configuration and corresponding status of the Ethernet port on the Iad. This was mandated by the Iad Rev. B, which can control its Ethernet port and also report its status. For the older Iad Rev. B, control and status of the Ethernet port are not available, and the new objects will read with fixed values. The objects are: iadEthPortSpeed, iadEthCurrentPortSpeed, iadEthFlowControl, iadEthCurrentFlowControl."
]
],
[
"200210090000Z",
[
"DESCRIPTION",
"SignalQuality and Attenuation were prefixed with dslLink in dslInterfaceEntry sequence, changed to dslInterface. Type DslLinkNumber was defined as 1..8, but V5 configurations already hold user port parameters for future DSL cards with 16 DSL links. This caused problems with some clients, so the definition was changed to 1..16. Revamped description of writeCommunity."
]
],
[
"200209190000Z",
[
"DESCRIPTION",
"The following objects were added or changed: dataPortSpeed New literal autoCrossoverAndPortSpeed(1) was added to type DataPortSpeedEnum. Warning: existing literals have changed their ordinal numbers. Revamped description, added reference. v5CardFlags Four new objects added to table v5CardTable, and v5CardETSIRelease the new type V5CardFlagSet. v5CardE1LineCode v5CardFrameFormat v5LinkAlarmStatus New literal v5LinkAlarmIdFailure(6) was added to type V5LinkAlarmStatusElem (at the end, without changing the ordinal numbers of existing literals). iadAlarmStatus New literal dcContinuity(2) was added to type IadAlarmStatusElem (at the end, without changing the ordinal numbers of existing literals). dslInterfaceSignalQuality Three new objects added to dslInterfaceTable. dslInterfaceAttenuation v5InterfaceAlarmStatus"
]
],
[
"200208230000Z",
[
"DESCRIPTION",
"Fixed a number of typos and formatting problems. Renamed l2 group to data group. (Input from BBe)."
]
],
[
"200207160000Z",
[
"DESCRIPTION",
"Changed all type assignments with BITS to textual conventions (BITS is part of the OBJECT-TYPE and TEXTUAL-CONVENTION macros (for SMI v2 only), but not a ASN.1 builtin or DefinedType, and so cannot be used in a type assignment or sequence definition). The types are: AvailabilityStatusElem, DslLinkAlarmElem, DslCardAlarmStatus, IadAlarmStatusElem, DslPerformanceStatusElem, V5LinkAlarmStatusElem, V5IsdnPortAlarmStatusElem, RackAlarmStatusElem, PerfControlStatus. Added import clause for TEXTUAL-CONVENTION. Changed dataCardAvailabilityStatus in DataCardEntry from BITS to AvailabilityStatusElem. Changed spelling bit-names of AvailabilityStatusElem to agree with ASN.1 definitions in X.721. Added description for the AvailabilityStatusElem textual convention (taken from attributes, with updates). In v5CardTable and v5LccTable, changed all read-write access clauses to read-create. Improved list of references in initial comment. Added list of tools tested with this MIB to initial comment. Constrained type Priority to (0..7). Constrained dslLinkNumberOfZBits to (0..1)."
]
],
[
"200207030000Z",
[
"DESCRIPTION",
"dslLinkAssignedTrunk was TrunkNumber in its Object-Type definition, fixed to TrunkNumberOrZero. For dslCardIPBaseAddress, v5CardIPBaseAddress and dataCardIPBaseAddress: corrected descriptions and examples to have plausible slot-numbers. ipBaseAddress adapted, with general examples."
]
],
[
"200206240000Z",
[
"DESCRIPTION",
"User manual realignment with syntax errors fixed, raw version."
]
],
[
"200206200000Z",
[
"DESCRIPTION",
"Changed all ...IPAddressPrefix variable names to ...IPBaseAddress (dslCard, v5Card, dataCard, pegasusSystem. Changed the variable in pegasusSystem from DisplayString to IpAddress, to agree with other variables. Renamed dataCardAlarmStatus to rackAlarmStatus (also renamed the associated BITS type to RackAlarmStatusElem). Moved to pegasusSystem. Renamed dslLinkAssociatedTrunk to dslLinkAssignedTrunk, to realign with PEMClient. Eliminated type DataPortNumber, used TrunkNumber in its place. Also created type TrunkNumberOrZero, to allow reference to 'no trunk'. Renamed ...ProgramVersion to ...FirmwareVersion: dslCard, dslCardM16, iad, v5Card, dataCard. Removed dataPortVLAN (and its type VLanId): is automatically computed as part of the enhanced switching configuration. For future general VLAN switching, it will be configured through standard MIBs. Removed FilterBroadcast and FilterUnknown for both dslLink and dataPort: present in the devices, but not in the PEMClient. It was not clear if these are useful, and according to PSt it was decided to 'hide' them. Removed special(4) from DslLinkLoopEnum - no longer supported."
]
],
[
"200206070000Z",
[
"DESCRIPTION",
"Removed ProceduralStatus and its enumeration type from all three cards and IAD. Fixed spelling of 'v5LccIsProteced' to 'v5LccIsProtected'. Improved various descriptions."
]
],
[
"200205220000Z",
[
"DESCRIPTION",
"Changed Gauge32 in perfData to Integer32, removed import for Gauge32. Added description for v5CardRowStatus."
]
],
[
"200205100000Z",
[
"DESCRIPTION",
"Improved descriptions for dslLink{DataRate,LinkRate,NumberOfBRA} and dslLinkDynamicSlotAllocation. Added 6 remaining objects for SNMP configuration to group pegasusSystem (read/write/trapCommunity, agentPort, authRespEnabled, trapDestination). Improved description of objects in perf group. DslCard, dataCard: removed AdminState, renumbered attributes contiguously. v5Lcc: renumbered objects contiguously, starting at 1. v5Interface: added RowStatus, changed all read-write objects to read-create, renumbered objects contigously, starting at 1. v5Link: added RowStatus, changed all read-write objects to read-create. iad: removed AdminState, renumbered attributes contiguously."
]
],
[
"200204250000Z",
[
"DESCRIPTION",
"Added group for performance history of V5 links and DSL interfaces. Added description for dslLinkNumberOfBRA, dslLinkDataRate, and dslLinkLineRate."
]
],
[
"200204160000Z",
[
"DESCRIPTION",
"Changed numbering scheme. { schmidtelecom 1 } is now reserved for a centralized registry, and the pegasusMibModule is { schmidtelecom 2 }. All groups and objects in this and other Pegasus MIBs are below pegasusMibModule."
]
],
[
"200204030000Z",
[
"DESCRIPTION",
"v5CardTable and V5LccTable (LogCommChan) now have a RowStatus. For v5CardTable, this controls provisioning mode, but it does not yet support creation. For v5LccTable, it controls verification of the v5LccPccV5LinkNumber and and v5LccPccTimeslot columns, which define the Pcc (PhysCommChan) (i.e. the RowStatus supports transactions on these values). Again, creation is not yet supported for v5LccTable. The new object mibRevision holds the revision number of the MIB with which the agent was compiled."
]
],
[
"200203190000Z",
[
"DESCRIPTION",
"Added missing import of DisplayString. Changed definitions of dslInterface counter values to Counter32 consistently. Added one missing variable to V5IsdnPortEntry sequence."
]
],
[
"200203140000Z",
[
"DESCRIPTION",
"Initial comments updated and moved to the module description, where they are more useful for typical browsers."
]
],
[
"200203010000Z",
[
"DESCRIPTION",
"Added PegasusSystem."
]
],
[
"200202280000Z",
[
"DESCRIPTION",
"Removed dslInterfaceIsRestartEnabled. Renumbered dslInterfaceEntry and dslLinkEntry columns to start with one and form a compact sequence."
]
],
[
"200202180000Z",
[
"DESCRIPTION",
"Added initial comment with overview and additional hints. Corrected spelling of CommStateEnum literals to comply with SNMPv2 (dashes were replaced by mixed-case spelling). Added VLAN support (DSL link and data card port). Presently only for enhanced mode, transparent and VLAN modes to come. Removed some VLAN related definitions which are not yet used."
]
],
[
"200202140000Z",
[
"DESCRIPTION",
"Added definitions for data switch and data switch port."
]
],
[
"200201250000Z",
[
"DESCRIPTION",
"Added object-type definition of v5IsdnPortAlarmStatus. Renumbered remaining objects."
]
],
[
"200201230000Z",
[
"DESCRIPTION",
"Changed all occurrences of NetworkAddress to IpAddress (imported from SNMPv2-SMI). NetworkAddress was in SNMPv1, but was replaced by IpAddress for SNMPv2. Corrected dataCardVLANMode to SYNTAX TruthValue - it erronously used NetworkAddress. Correct the year on the previous revision clause."
]
],
[
"200012210000Z",
[
"DESCRIPTION",
"Initial revision."
]
]
]
]
]
}